Rebar Cutter
Product Details
When hole placement conflicts with rebar or wire mesh, these bits enable the rebar to be removed so the hole can be drilled to the proper depth. Rebar cutters are separate from shanks. Shanks work with all sizes of rebar cutters. Overall length is approximately 15".
Installation
- After drilling through the reinforcement or plate, remove debris from the hole and resume drilling with carbide tipped drill bit
Related Links
Related Literature
Product Information Table
| Model No. | Diameter (in.) | Drilling Depth | Length (in.) |
|---|---|---|---|
| MCR05012 | 1/2 | 12 | Appx. 15 |
| MCR06212 | 5/8 | 12 | Appx. 15 |
| MCR07512 | 3/4 | 12 | Appx. 15 |
| MCR08712 | 7/8 | 12 | Appx. 15 |
| MCR10012 | 1 | 12 | Appx. 15 |
Product Information Tables
| Dia. (in.) | Drilling Depth (in.) | Model No. |
|---|---|---|
| 1/2 | 12 | MCR05012 |
| 5/8 | 12 | MCR06212 |
| 3/4 | 12 | MCR07512 |
| 7/8 | 12 | MCR08712 |
| 1 | 12 | MCR10012 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
