CIP-F Flexible Paste-Over Adhesive and Crack Sealant
On This Page
Cartridge Solutions
This product's information may differ depending on the category of use. You are currently viewing details related to Cartridge Solutions. You can also view product information related to the category: Crack Repair Accessories
Product Details
CIP-F is a flexible, peelable and fast-curing polyurea paste-over material. It is used to temporarily seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP-F can be peeled off at the completion of a crack injection job by pulling on starter tabs placed under the lead edge surface at the time of application or by prying under the paste-over.
Key Features
- 1:1 two component, high solids, epoxy amine based adhesive
- Non-sag paste consistency for horizontal, vertical or overhead applications
- Fast cure times for shorter times between paste-over and injection
- Remains flexible after cure for easier removal
- Moderate substrate bond; peels away for removal
- Gel Time — 4 minutes at 72°F (22°C), 9 minutes at 40°F (4°C)
- Cure Time — 1 hour at 72°F (22°C), and 3 hours at 40°F (4°C)
- Volatile organic compound (VOC) — 0 g/L
- Manufactured in the USA using global materials
| Model No. | Option | Packaging Qty. | Carton Qty. | Compatible Tools |
|---|---|---|---|---|
| CIP-F22 | Crack injection paste-over, 22 oz. side-by-side cartridge | 1 | 10 | EDTA22P dispensing tool / EMNCIPF22 mixing nozzle (included) |
Product Includes
- One EMNCIPF22 mixing nozzle is supplied with each cartridge
Storage Conditions
- For best results, store between 60°F (16°C) – 95°F (35°C)
Shelf Life
- 12 months from date of manufacture, unopened
Installation
- Apply to concrete 40°F (4°C) or above. For best results, warm material to 65°F (16°C) or above prior to application.
Related Literature
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
