text.skipToContent text.skipToNavigation

FX-207 Slurry Seal

FX-207

On This Page

Cementitious Coatings

This product's information may differ depending on the category of use. You are currently viewing details related to Cementitious Coatings. You can also view product information related to the categories of: Cementitious Concrete Repair Products, Coatings

FX-207 Slurry Seal is a two-component, polymer-modified cementitious coating designed for fire insulation with FRP materials as well as waterproofing and damp-proofing concrete and masonry substrates. This product is part of the tested assembly in UL Design No. N861, which achieved a four-hour fire rating when subjected to ASTM E119/UL 263 full-scale fire testing. Please refer to UL Online Certifications Directory for the UL listing.

CSI Specification

  • 07 16 00 Cementitious Waterproofing
  • 9 96 43 Fire Retardant Coatings

Key Features

  • Trowel or slurry consistency
  • Convenient pre-measured kit
  • Excellent bond strength
  • Can be applied by brush, roller, spray or trowel
  • UL listed

Applications

  • Coating over FRP materials for fire insulation and flame/smoke spread resistance
  • Horizontal and vertical surfaces
  • Above-grade and below-grade applications
  • Waterproofing and damp‑proofing concrete and masonry
  • Interior and exterior applications
  • To protect concrete and masonry from freeze/thaw cycles

Application Rate

  • Damp-proofing: 40 WFT mils total applied in one coat, 40 ft.2/US gal. (1 m2/L) depending on surface profile and porosity
  • Waterproofing: 80 WFT mils total applied in two coats, 40 ft.2/US gal. (1 m2/L) per coat depending on surface profile and porosity

Yield

  • 0.375 ft.3 (0.01 m3) per kit

Color

  • Gray

Mixing Ratio

  • Preproportioned kit. Use entire contents of all components.

Storage Conditions

  • Store dry between 40° and 95°F (4°–35°C). Protect liquid component from freezing.

Shelf Life

  • 1 year in unopened packaging

VOC

  • 10 g/L (mixed)

Options

3.3 US gallon (12.5 L) kit (FX207KT1-1) contains:

  • 1 US gallon (3.8 L) jug of Component “A” (FX207-1A)
  • 40 lb. (18.1 kg) bag of Component “B” (FX207-B)

Warranty

  • This product is covered by the Simpson Strong-Tie RPS Product One-Year Limited Warranty, which is available at strongtie.com/limited-warranties or by calling Simpson Strong-Tie at (800) 999-5099

Related Literature

Composite Strengthening Systems
F-R-CSS16
A flier designed to assist in the specification and installation of Composite Strengthening Systems, including fabrics, precured laminates and complementary products.
Flier
Technical Data Sheet for FX-207
T-R-FX207
This FX-207 data sheet includes product features, packaging options, technical data and installation information.
Data Sheet
Sistemas compuestos de reforzamiento™
F-R-CSS16SP
Folleto diseñado como ayuda para la especificación e instalación de sistemas compuestos de reforzamiento, que incluye tejidos, laminados precurados y productos suplementarios.
Flier
Safety Data Sheet for FX-207
SDS-FX_207-NA-ENG
Intended to provide information for use in workplace chemical management; information such as physical properties; hazards; protective measures; precautions for handling, storing, and transportation.
SDS
Ficha de Datos de Seguridad para FX-207
SDS-FX_207-NA-ES
Diseñado para dar información útil en la gestión de químicos en el lugar de trabajo; p.ej. propiedades físicas; riesgos; medidas de protección; precauciones para manejo, almacenamiento y transporte.
SDS
Fiche de Données de Sécurité pour FX-207
SDS-FX_207-NA-FRCA
Prévu pour fournir de l’information sur la gestion des produits chimiques au travail comme propriétés physiques, dangers, mesures de protection et précautions de manipulation, stockage et transport.
SDS

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT