HLPC Heavy L-Shaped Angle
On This Page
Product Details
The Indoor Architectural Products HLPC is a versatile angle designed for ornamental applications. This heavy utility angle is L-shaped, fitting it for a variety of applications where two members meet at a 90° angle. The HLPC is part of our Classic Collection, featuring modern smooth edges and clean lines. Along with its powder-coat finish, this connector is ideal for projects where the connectors are visible.
Key Features
- Helps reinforce wood members in right-angle connections
- Resists uplift and lateral forces
- Achieves lateral loads in both directions when installed in pairs
Material
- See table
Finish
- Black powder coat
Installation
- Install with bolts
- Lag screws of equal diameter (minimum 5" long) may be substituted for bolts in the beam with no reduction in load.
Options
- Gussets may be added to HLPC models when L ≥ 5" (specify G after model number, as in HL46GPC)
- Non-ornamental alternative: HL angles
Related Literature
Product Information Table
| Model No. | Description | Ga. | W1 (in.) | W2 (in.) | L (in.) | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|---|
| HL35GPC | Angle w/ gusset | 7 | 3 1/4 | 3 1/4 | 5 | Powder Coating, Black | 1 |
| HL37GPC | Angle w/ gusset | 7 | 3 1/4 | 3 1/4 | 7 1/2 | Powder Coating, Black | 1 |
| HL46GPC | Angle w/ gusset | 3 | 4 1/4 | 4 1/4 | 6 | Powder Coating, Black | 1 |
| HL55GPC | Angle w/ gusset | 7 | 5 3/4 | 5 3/4 | 5 | Powder Coating, Black | 1 |
| HL57GPC | Angle w/ gusset | 7 | 5 3/4 | 5 3/4 | 7 1/2 | Powder Coating, Black | 1 |
| HL76GPC | Angle w/ gusset | 3 | 7 1/4 | 7 1/4 | 6 | Powder Coating, Black | 1 |
| HL79GPC | Angle w/ gusset | 3 | 7 1/4 | 7 1/4 | 9 | Powder Coating, Black | 1 |
| HL33PC | Angle | 8 | 3 1/4 | 3 1/4 | 2 1/2 | Powder Coating, Black | 1 |
| HL35PC | Angle | 8 | 3 1/4 | 3 1/4 | 5 | Powder Coating, Black | 1 |
| HL37PC | Angle | 8 | 3 1/4 | 3 1/4 | 7 1/2 | Powder Coating, Black | 1 |
| HL43PC | Angle | 3 | 4 1/4 | 4 1/4 | 3 | Powder Coating, Black | 1 |
| HL46PC | Angle | 3 | 4 1/4 | 4 1/4 | 6 | Powder Coating, Black | 1 |
| HL49PC | Angle | 3 | 4 1/4 | 4 1/4 | 9 | Powder Coating, Black | 1 |
| HL53PC | Angle | 8 | 5 3/4 | 5 3/4 | 2 1/2 | Powder Coating, Black | 1 |
| HL55PC | Angle | 8 | 5 3/4 | 5 3/4 | 5 | Powder Coating, Black | 1 |
| HL57PC | Angle | 8 | 5 3/4 | 5 3/4 | 7 1/2 | Powder Coating, Black | 1 |
| HL73PC | Angle | 3 | 7 1/4 | 7 1/4 | 3 | Powder Coating, Black | 1 |
| HL76PC | Angle | 3 | 7 1/4 | 7 1/4 | 6 | Powder Coating, Black | 1 |
| HL79PC | Angle | 3 | 7 1/4 | 7 1/4 | 9 | Powder Coating, Black | 1 |
Load Tables
| Model No. | Ga. | Dimensions (in.) | Bolts (Total) | DF/SP Allowable Loads | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 and W2 | L | D1 | D2 | D3 | D4 | Qty. | Dia. | Uplift (160) | F1 (160) | ||
| Single Row Angles | |||||||||||
| HL33PC | 8 | 3 1/4 | 2 1/2 | 1 1/4 | — | 2 | — | 2 | 1/2 | 740 | 1,040 |
| HL35PC | 8 | 3 1/4 | 5 | 1 1/4 | 2 1/2 | 2 | — | 4 | 1/2 | 740 | 1,310 |
| HL37PC | 8 | 3 1/4 | 7 1/2 | 1 1/4 | 2 1/2 | 2 | — | 6 | 1/2 | 740 | 1,310 |
| HL43PC | 3 | 4 1/4 | 3 | 1 1/2 | — | 2 3/4 | — | 2 | 3/4 | 1,275 | 1,445 |
| HL46PC | 3 | 4 1/4 | 6 | 1 1/2 | 3 | 2 3/4 | — | 4 | 3/4 | 1,275 | 1,680 |
| HL49PC | 3 | 4 1/4 | 9 | 1 1/2 | 3 | 2 3/4 | — | 6 | 3/4 | 1,275 | 1,680 |
| Double Row Angles | |||||||||||
| HL53PC | 8 | 5 3/4 | 2 1/2 | 1 1/4 | — | 2 | 2 1/2 | 4 | 1/2 | 740 | 1,310 |
| HL55PC | 8 | 5 3/4 | 5 | 1 1/4 | 2 1/2 | 2 | 2 1/2 | 8 | 1/2 | 740 | 1,310 |
| HL57PC | 8 | 5 3/4 | 7 1/2 | 1 1/4 | 2 1/2 | 2 | 2 1/2 | 12 | 1/2 | 740 | 1,310 |
| HL73PC | 3 | 7 1/4 | 3 | 1 1/2 | — | 2 3/4 | 3 | 4 | 3/4 | 2,445 | 2,885 |
| HL76PC | 3 | 7 1/4 | 6 | 1 1/2 | 3 | 2 3/4 | 3 | 8 | 3/4 | 2,445 | 4,310 |
| HL79PC | 3 | 7 1/4 | 9 | 1 1/2 | 3 | 2 3/4 | 3 | 12 | 3/4 | 2,445 | 4,310 |
- See Straps and Ties General Notes.
- For SPF/HF lumber, use 0.85 x DF/SP allowable loads.
- Parts should be centered on the face of the member, which is at least as wide as the angle, to which they are attached.
- Wood members for the "3" and "5" series must have a minimum width and thickness of 3 1/2" for table loads to apply.
- Wood members for the "4" and "7" series must have a minimum width and thickness of 5 1/8" for table loads to apply.
- Allowable loads are for a single connector. Uplift loads may be doubled when using two connectors. Connectors are required on both sides to achieve lateral loads in both directions. Lateral loads may not be doubled.
- Lag screws of equal diameter (minimum 5" long) may be substituted for bolts in the beam with no reduction in load.
Typical HL55PC Installation
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
