×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

HLPC Heavy L-Shaped Angle

The Indoor Architectural Products HLPC is a versatile angle designed for ornamental applications. This heavy utility angle is L-shaped, fitting it for a variety of applications where two members meet at a 90° angle. The HLPC is part of our Classic Collection, featuring modern smooth edges and clean lines. Along with its powder-coat finish, this connector is ideal for projects where the connectors are visible.

Key Features

  • Helps reinforce wood members in right-angle connections
  • Resists uplift and lateral forces
  • Achieves lateral loads in both directions when installed in pairs

Material

  • See table

Finish

  • Black powder coat

Installation

  • Install with bolts
  • Lag screws of equal diameter (minimum 5" long) may be substituted for bolts in the beam with no reduction in load.

Options

  • Gussets may be added to HLPC models when L ≥ 5" (specify G after model number, as in HL46GPC)
  • Non-ornamental alternative: HL angles

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Description Ga. W1 (in.) W2 (in.) L (in.) Coating/Material Packaging Qty.
HL35GPC Angle w/ gusset 7 3 1/4 3 1/4 5 Powder Coating, Black 1
HL37GPC Angle w/ gusset 7 3 1/4 3 1/4 7 1/2 Powder Coating, Black 1
HL46GPC Angle w/ gusset 3 4 1/4 4 1/4 6 Powder Coating, Black 1
HL55GPC Angle w/ gusset 7 5 3/4 5 3/4 5 Powder Coating, Black 1
HL57GPC Angle w/ gusset 7 5 3/4 5 3/4 7 1/2 Powder Coating, Black 1
HL76GPC Angle w/ gusset 3 7 1/4 7 1/4 6 Powder Coating, Black 1
HL79GPC Angle w/ gusset 3 7 1/4 7 1/4 9 Powder Coating, Black 1
HL33PC Angle 7 3 1/4 3 1/4 2 1/2 Powder Coating, Black 1
HL35PC Angle 7 3 1/4 3 1/4 5 Powder Coating, Black 1
HL37PC Angle 7 3 1/4 3 1/4 7 1/2 Powder Coating, Black 1
HL43PC Angle 3 4 1/4 4 1/4 3 Powder Coating, Black 1
HL46PC Angle 3 4 1/4 4 1/4 6 Powder Coating, Black 1
HL49PC Angle 3 4 1/4 4 1/4 9 Powder Coating, Black 1
HL53PC Angle 7 5 3/4 5 3/4 2 1/2 Powder Coating, Black 1
HL55PC Angle 7 5 3/4 5 3/4 5 Powder Coating, Black 1
HL57PC Angle 7 5 3/4 5 3/4 7 1/2 Powder Coating, Black 1
HL73PC Angle 3 7 1/4 7 1/4 3 Powder Coating, Black 1
HL76PC Angle 3 7 1/4 7 1/4 6 Powder Coating, Black 1
HL79PC Angle 3 7 1/4 7 1/4 9 Powder Coating, Black 1

Load Tables

Model No. Ga. Dimensions (in.) Bolts (Total) DF/SP Allowable Loads
W1 and W2 L D1 D2 D3 D4 Qty. Dia. Uplift (160) F1 (160)
Single Row Angles
HL33PC 7 3 1/4 2 1/2 1 1/4 2 2 1/2 740 1,040
HL35PC 7 3 1/4 5 1 1/4 2 1/2 2 4 1/2 740 1,310
HL37PC 7 3 1/4 7 1/2 1 1/4 2 1/2 2 6 1/2 740 1,310
HL43PC 3 4 1/4 3 1 1/2 2 3/4 2 3/4 1,275 1,445
HL46PC 3 4 1/4 6 1 1/2 3 2 3/4 4 3/4 1,275 1,680
HL49PC 3 4 1/4 9 1 1/2 3 2 3/4 6 3/4 1,275 1,680
Double Row Angles
HL53PC 7 5 3/4 2 1/2 1 1/4 2 2 1/2 4 1/2 740 1,310
HL55PC 7 5 3/4 5 1 1/4 2 1/2 2 2 1/2 8 1/2 740 1,310
HL57PC 7 5 3/4 7 1/2 1 1/4 2 1/2 2 2 1/2 12 1/2 740 1,310
HL73PC 3 7 1/4 3 1 1/2 2 3/4 3 4 3/4 2,445 2,885
HL76PC 3 7 1/4 6 1 1/2 3 2 3/4 3 8 3/4 2,445 4,310
HL79PC 3 7 1/4 9 1 1/2 3 2 3/4 3 12 3/4 2,445 4,310
  1. See Straps and Ties General Notes.
  2. For SPF/HF lumber, use 0.85 x DF/SP allowable loads.
  3. Parts should be centered on the face of the member, which is at least as wide as the angle, to which they are attached.
  4. Wood members for the "3" and "5" series must have a minimum width and thickness of 3 1/2" for table loads to apply.
  5. Wood members for the "4" and "7" series must have a minimum width and thickness of 5 1/8" for table loads to apply.
  6. Allowable loads are for a single connector. Uplift loads may be doubled when using two connectors. Connectors are required on both sides to achieve lateral loads in both directions. Lateral loads may not be doubled.
  7. Lag screws of equal diameter (minimum 5" long) may be substituted for bolts in the beam with no reduction in load.
Typical HL55PC Installation

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT