×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

RPS-505 Water-Based Acrylic Coating

Coatings

This product's information may differ depending on the category of use. You are currently viewing details related to Coatings. You can also view product information related to the category: Decorative/Protective

RPS-505 water-based acrylic coating – formerly, FX-505 – is a single-component, fast-drying, protective architectural coating for concrete, masonry and stucco.

CSI Specification

  • 09 97 23 Concrete & Masonry Coatings

Key Features

  • Excellent color retention
  • 100% acrylic resin
  • Good hiding properties
  • Breathable
  • Water based
  • Fast drying
  • Can be applied by brush, roller or spray
  • Easy to clean
  • Bonds well to concrete, masonry and FRP substrates
  • Repels rain
  • Excellent UV resistance

Applications

  • Commercial building façades
  • Concrete and masonry substrates
  • New and remedial applications
  • Exterior applications
  • Vertical and overhead surfaces
  • Tilt‑wall and precast panels
  • Block and brick masonry
  • Fiber-reinforced polymer (FRP) topcoat
  • Retaining walls
  • Various DOT applications

Application Rate

  • 2.5–5 DFT mils total applied in two coats
  • 275–550 ft.2/US gal. (6.7–13.5 m2/L) per coat depending on surface profile and porosity

Finish

  • Gloss

Color

  • Medium gray

Storage Conditions

  • Store dry between 40–95°F (4–35°C). Protect from freezing. Discard if frozen.

Shelf Life

  • 1 year in unopened packaging

VOC

  • 86 g/L

Options

  • 1 US gallon (3.8 L) can (RPS-505GR‑1)
  • 5 US gallon (18.9 L) pail (RPS-505GR‑5)

Limited Warranty

  • This product is covered by the Simpson Strong-Tie® RPS Product One-Year Limited Warranty, which is available at strongtie.com/limited-warranties or by calling Simpson Strong-Tie at (800) 999-5099

Related Literature

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT