×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

RPS-207 Slurry Seal

Coatings

This product's information may differ depending on the category of use. You are currently viewing details related to Coatings. You can also view product information related to the categories of: Cementitious Coatings, Cementitious Concrete Repair Products

RPS-207 slurry seal  – formerly, FX-207 – is a two-component, polymer-modified cementitious coating designed for fire insulation with FRP materials as well as waterproofing and damp-proofing concrete and masonry substrates. This product is part of the tested assembly in UL Design No. N861, which achieved a four-hour fire rating when subjected to ASTM E119/UL 263 full-scale fire testing. Please refer to UL Online Certifications Directory for the UL listing.

CSI Specification

  • 07 11 16 Cementitious Damp-proofing
  • 9 96 43 Fire Retardant Coatings

Key Features

  • Trowel or slurry consistency
  • Convenient pre-measured kit
  • Excellent bond strength
  • Can be applied by brush, roller, spray or trowel
  • UL listed

Applications

  • Coating over FRP materials for fire insulation and flame/smoke spread resistance
  • Horizontal and vertical surfaces
  • Above-grade and below-grade applications
  • Waterproofing and damp‑proofing concrete and masonry
  • Interior and exterior applications
  • To protect concrete and masonry from freeze/thaw cycles

Application Rate

  • Damp-proofing: 40 WFT mils total applied in one coat, 40 ft.2/US gal. (1 m2/L) depending on surface profile and porosity
  • Waterproofing: 80 WFT mils total applied in two coats, 40 ft.2/US gal. (1 m2/L) per coat depending on surface profile and porosity

Yield

  • 0.50 ft.3 (0.014 m3) per kit

Mixing Ratio

  • Preproportioned kit. Use entire contents of all components.

Storage Conditions

  • Store dry between 40–95°F (4–35°C). Protect liquid component from freezing.

Shelf Life

  • 1 year in unopened packaging

VOC

  • 3 g/L (mixed)

Options

3.9 US gallon (15 L) kit (RPS-207KT1-1) contains:

  • 1 US gallon (3.8 L) jug of Component “A” (RPS-207-1A)
  • 50 lb. (22.7 kg) bag of Component “B” (RPS-207-50B)

Limited Warranty

  • This product is covered by the Simpson Strong-Tie® RPS Product One-Year Limited Warranty, which is available at strongtie.com/limited-warranties or by calling Simpson Strong-Tie at (800) 999-5099

Related Literature

Technical Data Sheet for RPS-207 Slurry Seal
T-R-RPS207
This RPS-207 data sheet includes product features, packaging options, technical data and installation information.
Data Sheet
Anchoring, Fastening, Restoration and Strengthening Systems for Concrete and Masonry
C-A-2023
A catalog of products belonging to our anchoring, fastening, restoration and strengthening systems for concrete and masonry.
Catalog
U.S. Army Corps of Engineers restores eroding fish passage with help from Simpson Strong-Tie
CS-R-MILLCREEK21
A concrete products case study highlighting the retrofit of a decades-old water diversion system using Simpson Strong-Tie® carbon FRP, RPS concrete repair and CI crack repair products.
Case Study
Manufacturer's Statement FX Product Renaming to RPS
T-R-MS-FXRPS23
A letter affirming that products that the products listed are equivalent. These products have been rebranded from the FX prefix to the new RPS prefix.
Technical Bulletin
Safety Data Sheet for RPS-207
SDS-RPS207-NA-ENG-1121
Intended to provide information for use in workplace chemical management; information such as physical properties; hazards; protective measures; precautions for handling, storing, and transportation.
SDS

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT