text.skipToContent text.skipToNavigation

Special Order Custom Clips and Connectors 

Special Order Custom Clips and Connectors

On This Page

Simpson Strong-Tie can make a variety of flat and bent steel clips and connectors for cold-formed steel framing. Most custom clips can be punched with different holes and slots.


  • 229 mil (3 ga.) maximum, 43 mil (18 ga.) minimum mill-certified steel (carbon and Type 316L stainless steel)


  • Galvanized, Simpson Strong-Tie gray paint. Contact Simpson Strong-Tie for availability.

Ordering Information

Specification Example
Quantity: XX pieces
Per the attached CAD drawing (.dwg or .dxf format)
Drawing must be fully dimensioned, including:

  • Overall dimensions
  • Leg dimensions
  • Bend angles (if required)
  • Hole/slot sizes and centerlines (if required)

Material Specification: Contact Simpson Strong‑Tie for availability
Thickness: 54 mil (16 ga.)
Min. Yield Strength (Fy) = 33 ksi, Min. Tensile Strength (Fu) = 45 ksi
Finish: Galvanized G90

To Obtain a Quote

  • Supply a CAD drawing in .dwg or .dxf format complete with all dimensions, hole diameter and centerline locations, bend angles, steel strength (min. Fy and Fu), thickness (mil and/or ga.) and finish: (galvanized to G90, G185) or Simpson Strong‑Tie gray paint (specify)
  • Total shape and size up to a maximum of 48" x 48" (approx. 1/16" tolerance)
  • Simpson Strong‑Tie does not provide product engineering or load values for special-order custom clips and connectors
  • Contact Simpson Strong‑Tie for pricing information
  • For additional information, please refer to Important Information and General Notes

Related Literature

Code Reports & Compliance