×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

PC Standing-Seam-Roofing Panel Clip Screw (Collated)

Collated Exterior Wood Screws

This product's information may differ depending on the category of use. You are currently viewing details related to Collated Exterior Wood Screws. You can also view product information related to the category: Collated Interior Wood Screws

Key Features

  • Pancake head
  • #2 square drive (driver bit in each box; replacement bit model BIT2SU)
  • Type-17 point for fast starts
  • Straight collation
  • Type 410 stainless steel is coated for additional corrosion protection

Applications

  • Standing-seam roofing panel clips to wood, window panel to wood

Warning

  • Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use this product in dry, interior and noncorrosive environments only.

Ordering Information

  • Type 410 stainless-steel models are subject to quantities on hand or may require special ordering and are subject to minimum order quantities and longer lead times. Call Simpson Strong-Tie for details (800) 999-5099.

Related Links

Catalog Pages

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
These products are subject to quantities on hand or may require special ordering and are subject to minimum order quantities and longer lead times. Call Simpson Strong‑Tie for details (800) 999-5099.
Model No. Coating/Material Screw Size Length (in.) Head Diameter (in.) Drive Type Head Type Thread Type TPI Point Type Compatible Tools Packaging Qty.
SSPC1BS1012 Type 410 Stainless Steel #10 1 0.405 #2 Square Pancake Head Fine Threads 12 Type-17 Point Quik Drive® PROPP150G2 1500
PCQ112BS1012 Quik Guard® Coating #10 1 1/2 0.405 #2 Square, Undersized Pancake Head Fine Threads 12 Type-17 Point Quik Drive® PROPP150G2 1500
PC1BS1012 Clear Zinc Coating #10 1 0.405 #2 Square Pancake Head Fine Threads 12 Type-17 Point Quik Drive® PROPP150G2 1500

Product Information Table

Model No. Length (in.) Screw Size Drive Type Head Type Thread Type TPI Point Type Coating/Material Packaging Quantity Compatible Quik Drive® Tools UPC
SSPC1BS1012 1 #10 #2 Square Pancake Head Fine Threads 12 Type-17 Point Type 410 Stainless Steel 1500 PROPP150 746056056607
PCQ112BS1012 1 1/2 #10 #2 Square, Undersized Pancake Head Fine Threads 12 Type-17 Point Quik Guard® Coating 1500 PROPP150 746056000006
PCQ1BS1012 1 #10 #2 Square, Undersized Pancake Head Fine Threads 12 Type-17 Point Quik Guard® Coating 1500 PROPP150 746056464600
PCQ1BS1211 1 #12 #2 Square, Undersized Pancake Head Fine Threads 11 Type-17 Point Clear-Zinc Coating 1500 PROPP150 746056777700
PC1BS1012 1 #10 #2 Square Pancake Head Fine Threads 12 Type-17 Point Clear-Zinc Coating 1500 PROPP150 746056001201
PC1BS1211 1 #12 #2 Square Pancake Head Fine Threads 11 Type-17 Point Type 410 Stainless Steel 1500 PROPP150 746056112303
    These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated woods. For applications in higher-exposure applications, consider type-300 series stainless-steel fasteners for superior corrosion resistance. See additional important information before selecting a fastener for a specific application.

Load Tables

Cold-Formed Steel (CFS) Member Connection Loads

  1. Screws and screw connections have been tested per AISI Standard Test Method S904 and S905.
  2. The tabulated ASD loads for cold-formed steel (CFS) members are based on the lower of the screw strength or the strength of the screw in the connected members per AISI S100.
  3. The safety factor is based on AISI S100 for tested connections.
  4. The nominal load values listed are achieved under laboratory conditions and should not be used for design loads.
  5. Values are based on CFS members with a minimum yield strength of Fy = 33 ksi and tensile strength of Fu = 45 ksi for 43 mil (18 ga.) to 27 mil (22 ga.), minimum yield strength of Fy = 50 ksi and tensile strength of Fu = 65 ksi for 22 mil (24 ga.), and a minimum yield strength of Fy = 50 ksi and Fu = 65 ksi for 54 mil (16 ga.) and thicker.
  6. For design purposes, steel sheet thicknesses are 0.0227" for 22 mil, 0.283" for 27 mil, 0.0346" for 33 mil, 0.0451" for 43 mil, 0.0566" for 54 mil, 0.0713" for 68 mil, and 0.1017" for 97 mil. The actual sheet thickness shall not be less than 95% of these design thicknesses as specified in AISI S100.
  7. Screw diameters per AISI S200 General Provision Commentary Table D1.1.
  8. Minimum required screw length is the lesser of 3/4" or the minimum length required for the screw to extend through the steel connection a minimum of three exposed threads per AISI S200 General Provisions Standard Section D1.3.
  9. Larger of screw head or washer diameter, dw, for #10 and #12 screws is 0.375".
  10. The allowable load (ASD) values shown are not permitted to be increased for short-duration loads such as wind or earthquake loads.
  11. The lower of the Pull-Over and Pull-Out allowable load should be used for tension design.
  12. The tabulated shear values are based on the thinner steel member in connection. Steel thickness for both members must be in the range of 12–22 gauge.

Wood Member Connection Withdrawal Loads

  1. Values based on the lower screw strength or strength of the screw in the connected members.
  2. The tabulated allowable loads for wood members are based on factor of safety of 5 as specified in AC233, and CD=1.0. Values may be multiplied by CD=1.6 for wind or earthquake.
  3. The average ultimate loads are achieved under laboratory conditions and should not be used for design purposes.
  4. Screw diameters per AISI S200 General Provisons Commentary Table D1-1.
  5. See General Load Tables for information on screw strength.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT