BPS Bearing Plate with Slotted Hole
On This Page
Concrete Connectors
This product's information may differ depending on the category of use. You are currently viewing details related to Concrete Connectors. You can also view product information related to the category: Bearing Plates
Product Details
The BPS is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This bearing plate features a slotted hole that allows for adjustability to account for bolts that are not in the middle of the sill plate. The BPS is approved for installation with Titen HD® heavy-duty screw anchors.
Key Features
- Eliminates the need for standard-cut washers when used with Titen HD® heavy-duty screw anchors
- Slotted hole allows for adjustability
- May be ordered with a hot-dip galvanized (HDG) finish for higher corrosion resistance
Material
- 3 ga.
Finish
- None or HDG; see Corrosion Information
Installation
- See General Notes.
- For shearwall applications, position edge of plate washer within 1/2" of sheathed edge of track-bottom plate.
- Standard-cut washer required with BPS slotted bearing plates.Washer not required when used with Titen HD heavy-duty screw anchors.
- Tighten each anchor bolt with a nut and washer.
Related Literature
Product Information Table
| Model No. | Bolt Dia. (in.) | Ga. | Thickness (in.) | W (in.) | L (in.) | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|---|
|
Footnotes
|
|||||||
| BPS 1/2-3 | 1/2 | 3 | 0.229 | 3 | 3 | None | 1 |
| BPS 1/2-3HDG | 1/2 | 3 | 0.229 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BPS 1/2-6 | 1/2 | 3 | 0.229 | 3 | 4 1/2 | None | 1 |
| BPS 1/2-6HDG | 1/2 | 3 | 0.229 | 3 | 4 1/2 | Hot-Dip Galvanized | 1 |
| BPS 3/4-3 | 3/4 | 3 | 0.229 | 3 | 3 | None | 1 |
| BPS 3/4-3HDG | 3/4 | 3 | 0.229 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BPS 3/4-6 | 3/4 | 3 | 0.229 | 3 | 4 1/2 | None | 1 |
| BPS 3/4-6HDG | 3/4 | 3 | 0.229 | 3 | 4 1/2 | Hot-Dip Galvanized | 1 |
| BPS 5/8-3 | 5/8 | 3 | 0.229 | 3 | 3 | None | 1 |
| BPS 5/8-3HDG | 5/8 | 3 | 0.229 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BPS 5/8-6 | 5/8 | 3 | 0.229 | 3 | 4 1/2 | None | 1 |
| BPS 5/8-6HDG | 5/8 | 3 | 0.229 | 3 | 4 1/2 | Hot-Dip Galvanized | 1 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
