Deck-Drive™ DCU COMPOSITE Screw

Product Details

The Deck-Drive DCU Composite screw is engineered to provide beautiful fastening results for all types of composite decking while also offering greater ease of installation, a clean finish and superb corrosion resistance. The Deck-Drive DCU is the go-to-screw for all your composite decking applications, eliminating the need to mix and match screws to the decking.

Deck-Drive DCU Composite decking screws are available in carbon steel with our Quik Guard® coating. For superior corrosion resistance in marine or high-exposure environments, choose the appropriate stainless-steel DCU screw (Type 305 or Type 316). DCU screws provide a clean finish because of their special head design and are available in 11 colors, matched to blend with most major decking manufacturers. These are bulk screws, also available collated for the Quik Drive® auto-feed screw driving system.

Key Features

Available in carbon steel, as well as Type 305 and Type 316 stainless steel for high to severe levels of corrosion resistance
Tri-lobe thread design reduces damage to the composite board while driving
Inverted upper threads clear excess material to ensure the screw is seated properly and consistently
Double-cut point penetrates composite decking with ease for faster starts
Cap-head prevents mushrooming and material from rising up above the deck for a smoother, clean-looking installation
350-count screws install approx. 100 sq. ft. of decking with framing at 16" on-center spacing
1,750-count screws install approx. 500 sq. ft. of decking with framing at 16" on-center spacing
Approved fastener (by Trex^®) for Trex composite decking
See Composite-Decking Color Cross-Reference chart
Replacement bit part number: BIT20T-2-RC3

Applications

Fastening composite decking boards

Catalog Pages

C-F-2019 (Fastening Systems), pages 76–77

Related Literature

Fastening Systems Catalog

C-F-2019

A catalog including new product information as well as any applicable specification and installation instructions for Simpson Strong-Tie® fasteners and Quik Drive® systems.

Catalog

Fastening Systems Technical Guide

C-F-2019TECHSUP

A technical document featuring engineering information for structural fasteners featured in the C-F-2019 Fastening Systems Catalog.

Catalog

Guía técnica de los sistemas de sujeción

C-F-2019TECHSP

Un documento técnico información de ingeniería para los sujetadores estructurales que se incluyen en el C-F-2019SP Catálogo de sistemas de sujeción.

Catalog

Sistemas de sujeción

C-F-2019SP

Catálogo que incluye información sobre productos nuevos y las instrucciones de instalación y especificaciones correspondientes para los sujetadores Simpson Strong-Tie® y los sistemas Quik Drive®.

Catalog

Deck Connection and Fastening Guide

F-DECKCODE20

A guide to recognizing deck deficiencies and building or retrofitting safer, longer-lasting outdoor decks, with 2018 IBC and IRC code-compliant solutions for using the latest connectors and fasteners.

Product Guide

Composite Decking Meets Its Match

S-F-CMG20

A sales flier mapping Simpson Strong-Tie fastener coating colors to major manufacturers' deck board colors.

Flier

DECK-DRIVE DCU COMPOSITE SCREW

F-F-DCU20

A flier providing product and installation information about the Deck-Drive™ DCU Composite screw family.

Flier

Deck-Drive™ DCU CompositeScrews

S-F-DCU21

A two-page sales flier for the 2" Deck-Drive DCU Composite screws.

Flier

We Have a Match for Any Deck Board - Painted-Head, Stainless-Steel Deck Screw Solutions

S-F-PNTHDSS20

A sales flier promoting Simpson Strong-Tie® painted-head, stainless-steel deck-fastener solutions.

Flier

Premium Composite and PVC Deck-Fastening Solutions

T-F-SCRWPLUGS18

A multi-fold, full-color installation guide providing product and installation information for the Deck-Drive™ DCU Screw Plug Solution.

Installation Guide

Product Information Table

Fastener Production Information and Stuff & Things
Model No.	Coating/Material	Screw Size	Length (in.)	Head Diameter (in.)	Drive Type	Head Type	Thread Type	Point Type	Color	Packaging Qty.
Footnotes 350 screws install approx. 100 sq. ft. of decking with framing at 16" on-center spacing. 1,750 screws install approx. 500 sq. ft. of decking with framing at 16" on-center spacing.
DCU234BR01MB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 01	1750
DCU234BR01R350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 01	350
DCU234BR01R70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 01	70
DCU234BR05MB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 05	1750
DCU234BR05R350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 05	350
DCU234BR05R70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 05	70
DCU234GR01MB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 01	1750
DCU234GR01R350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 01	350
DCU234GR01R70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 01	70
DCU234GR04MB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 04	1750
DCU234GR04R350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 04	350
DCU234GR04R70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 04	70
DCU234GRMB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray	1750
DCU234GRR350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray	350
DCU234GRR70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray	70
DCU234RD01MB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red 01	1750
DCU234RD01R350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red 01	350
DCU234RD01R70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red 01	70
DCU234RDMB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red	1750
DCU234RDR350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red	350
DCU234RDR70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red	70
DCU234TN01MB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 01	1750
DCU234TN01R350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 01	350
DCU234TN01R70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 01	70
DCU234TN02MB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 02	1750
DCU234TN02R350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 02	350
DCU234TN02R70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 02	70
DCU234TN03MB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 03	1750
DCU234TN03R350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 03	350
DCU234TN03R70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 03	70
DCU234TNMB	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan	1750
DCU234TNR350	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan	350
DCU234TNR70	Quik Guard® Coating	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan	70
DCU2R70	Quik Guard® Coating	#10	2	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	None	70
DCU234C305	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	None	70
DCU234MB305	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	None	1750
DCU234MB305BR01	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 01	1750
DCU234MB305BR05	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 05	1750
DCU234MB305GR	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray	1750
DCU234MB305GR01	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 01	1750
DCU234MB305GR04	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 04	1750
DCU234MB305RD	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red	1750
DCU234MB305RD01	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red 01	1750
DCU234MB305TN	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan	1750
DCU234MB305TN01	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 01	1750
DCU234MB305TN02	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 02	1750
DCU234MB305TN03	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 03	1750
DCU234P305	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	None	350
DCU234P305BR01	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 01	350
DCU234P305BR05	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 05	350
DCU234P305GR	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray	350
DCU234P305GR01	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 01	350
DCU234P305GR04	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 04	350
DCU234P305RD	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red	350
DCU234P305RD01	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red 01	350
DCU234P305TN	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan	350
DCU234P305TN01	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 01	350
DCU234P305TN02	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 02	350
DCU234P305TN03	Type 305 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 03	350
DCU234C316	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	None	70
DCU234C316BR01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 01	70
DCU234C316BR05	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 05	70
DCU234C316GR	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray	70
DCU234C316GR01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 01	70
DCU234C316GR04	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 04	70
DCU234C316RD	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red	70
DCU234C316RD01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red 01	70
DCU234C316TN	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan	70
DCU234C316TN01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 01	70
DCU234C316TN02	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 02	70
DCU234C316TN03	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 03	70
DCU234MB316	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	None	1750
DCU234MB316BR01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 01	1750
DCU234MB316BR05	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 05	1750
DCU234MB316GR	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray	1750
DCU234MB316GR01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 01	1750
DCU234MB316GR04	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 04	1750
DCU234MB316RD	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red	1750
DCU234MB316RD01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red 01	1750
DCU234MB316TN	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan	1750
DCU234MB316TN01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 01	1750
DCU234MB316TN02	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 02	1750
DCU234MB316TN03	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 03	1750
DCU234P316	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	None	350
DCU234P316BR01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 01	350
DCU234P316BR05	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Brown 05	350
DCU234P316GR	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray	350
DCU234P316GR01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 01	350
DCU234P316GR04	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Gray 04	350
DCU234P316RD	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red	350
DCU234P316RD01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Red 01	350
DCU234P316TN	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan	350
DCU234P316TN01	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 01	350
DCU234P316TN02	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 02	350
DCU234P316TN03	Type 316 Stainless Steel	#10	2 3/4	0.230	T20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Tan 03	350

Product Information Table

Model No.	Length (in.)	Screw Size	Drive Type	Head Type	Thread Type	Point Type	Coating/Material	Color	Packaging Quantity¹	UPC
DCU234C316BR01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Brown 01	70	707392655862
DCU234C316BR05	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Brown 05	70	707392842859
DCU234C316GR	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Gray	70	707392593485
DCU234C316GR01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Gray 01	70	707392854234
DCU234C316GR04	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Gray 04	70	707392514565
DCU234C316RD	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Red	70	707392947165
DCU234C316RD01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Red 01	70	707392831341
DCU234C316TN	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan	70	707392923961
DCU234C316TN01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan 01	70	707392869184
DCU234C316TN02	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan 02	70	707392534310
DCU234C316TN03	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan 03	70	707392752455
DCU234BR01MB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Brown 01	1750	707392789291
DCU234BR01R350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Brown 01	350	707392198185
DCU234BR05MB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Brown 05	1750	707392435952
DCU234BR05R350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Brown 05	350	707392174837
DCU234GR01MB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Gray 01	1750	707392925095
DCU234GR01R350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Gray 01	350	707392674054
DCU234GR04MB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Gray 04	1750	707392292425
DCU234GR04R350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Gray 04	350	707392977711
DCU234GRMB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Gray	1750	707392158875
DCU234GRR350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Gray	350	707392964377
DCU234MB305	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	None	1750	707392558170
DCU234MB305BR01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Brown 01	1750	707392273479
DCU234MB305BR05	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Brown 05	1750	707392424178
DCU234MB305GR	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Gray	1750	707392214694
DCU234MB305GR01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Gray 01	1750	707392300519
DCU234MB305GR04	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Gray 04	1750	707392950332
DCU234MB305RD	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Red	1750	707392214694
DCU234MB305RD01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Red 01	1750	707392915546
DCU234MB305TN	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Tan	1750	707392214724
DCU234MB305TN01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Tan 01	1750	707392234623
DCU234MB305TN02	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Tan 02	1750	707392613176
DCU234MB305TN03	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Tan 03	1750	707392680895
DCU234MB316	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	None	1750	707392986775
DCU234MB316BR01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Brown 01	1750	707392214694
DCU234MB316BR05	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Brown 05	1750	707392300113
DCU234MB316GR	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Gray	1750	707392479680
DCU234MB316GR01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Gray 01	1750	707392318392
DCU234MB316GR04	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Gray 04	1750	707392516064
DCU234MB316RD	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Red	1750	707392974321
DCU234MB316RD01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Red 01	1750	707392922933
DCU234MB316TN	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan	1750	707392868972
DCU234MB316TN01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan 01	1750	707392784715
DCU234MB316TN02	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan 02	1750	707392365396
DCU234MB316TN03	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan 03	1750	707392930839
DCU234P305	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	None	350	707392767015
DCU234P305BR01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Brown 01	350	707392241676
DCU234P305BR05	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Brown 05	350	707392112822
DCU234P305GR	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Gray	350	707392947370
DCU234P305GR01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Gray 01	350	707392804246
DCU234P305GR04	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Gray 04	350	707392658153
DCU234P305RD	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Red	350	707392644545
DCU234P305RD01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Red 01	350	707392871415
DCU234P305TN	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Tan	350	707392513469
DCU234P305TN01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Tan 01	350	707392715191
DCU234P305TN02	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Tan 02	350	707392499947
DCU234P305TN03	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 305 Stainless Steel	Tan 03	350	707392359999
DCU234P305TN03	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	None	350	707392336822
DCU234P316BR01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Brown 01	350	707392767688
DCU234P316BR05	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Brown 05	350	707392701521
DCU234P316GR	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Gray	350	707392511793
DCU234P316GR01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Gray 01	350	707392610762
DCU234P316GR04	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Gray 04	350	707392112129
DCU234P316RD	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Red	350	707392946557
DCU234P316RD01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Red 01	350	707392718673
DCU234P316TN	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan	350	707392886068
DCU234P316TN01	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan 01	350	707392260561
DCU234P316TN02	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan 02	350	707392847038
DCU234P316TN03	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Type 316 Stainless Steel	Tan 03	350	707392770619
DCU234RD01MB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Red 01	1750	707392234074
DCU234RD01R350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Red 01	350	707392803942
DCU234RDMB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Red	1750	707392881094
DCU234RDR350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Red	350	707392244691
DCU234TN01MB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Tan 01	1750	707392835431
DCU234TN01R350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Tan 01	350	707392103639
DCU234TN02MB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Tan 02	1750	707392106999
DCU234TN02R350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Tan 02	350	707392603863
DCU234TN03MB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Tan 03	1750	707392922070
DCU234TN03R350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Tan 03	350	707392857372
DCU234TNMB	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Tan	1750	707392549444
DCU234TNR350	2 3/4	#10	T-20 6-Lobe	Cap Head	Tri-Lobe Threads	Double-Cut Point	Quik Guard® Coating	Tan	350	707392726760
350 screws install approx. 100 sq. ft. of decking with framing at 16" on-center spacing; 1,750 screws install approx. 500 sq. ft. of decking with framing at 16" on-center spacing.

Code Reports & Compliance

Drawings

		PDF	DWG	DXF	RFA	IFC	SAT

Deck-Drive™ DCU COMPOSITE Screw

On This Page

Product Details

Key Features

Applications

Related Links

Catalog Pages

Related Literature

Product Information Table

Product Information Table

Code Reports & Compliance

Drawings

Related Products