text.skipToContent text.skipToNavigation

DTT Deck Tension Tie

DTT

On This Page

Deck Ties

This product's information may differ depending on the category of use. You are currently viewing details related to Deck Ties. You can also view product information related to the category: SDS Screw Holdowns

DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load rated as a holdown for light-duty shearwalls and braced-wall panel applications.

For new construction or to make an existing deck code-compliant, the DTT1Z can be used as a tension tie to satisfy the 2015 and 2018 IRC provision for a 750 lb. lateral load connection to the house at four locations per deck. This code detail permits the lateral connection from the deck joists to be made to top plates, studs or headers within the supporting structure, which eliminates the need to access to the floor joists inside the home. The DTT1Z is available in a kit (DTT1Z-KT) that includes (4) DTT1Z connectors, (4) Strong-Drive® SDWH Timber-Hex HDG screws (SDWH27800G) and (26) #9 x 1 1/2" Strong-Drive SD Connector screws.

The DTT1Z fastens to the narrow or wide face of a single 2x with Strong-Drive SD Connector screws or nails and accepts a 3/8" bolt, anchor bolt or lag screw (washer required) or can be installed with the Strong-Drive SDWH Timber-Hex HDG screw with an integral washer.

The DTT2 can be used to satisfy the IRC provision for a 1,500 lb. lateral load connection at two locations per deck. Additionally, the DTT2 has been tested and evaluated in deck guardrail post applications to resist the code-specified lateral forces at the top of railing assemblies. The DTT2 is also available with longer 2 1/2" Strong-Drive SDS Heavy-Duty Connector screws (model DTT2Z-SDS2.5) to achieve higher loads when needed. The DTT2 fastens easily to the wide face of a single or double 2x using Strong-Drive SDS Heavy-Duty Connector screws (included) and accepts a 1/2"-diameter bolt or anchor bolt.

For guard post installations using Strong-Drive SDWS Timber screws, see technical bulletin Guard Post Installations Using Strong-Drive SDWS TIMBER Screws (T-F-SDWSGRD).

Material

  • 14 gauge

Finish

  • DTT1Z/DTT2Z — ZMAX® coating; DTT2SS — stainless steel; see Corrosion Information

Installation

  • Use all specified fasteners; see General Notes
  • A standard cut washer (included for DTT2) must be installed between the nut and the seat
  • Strong-Drive SDS Heavy-Duty Connector screws install best with a low-speed high-torque drill with a 3/8" hex-head driver (model DB6H1.75)
  • Strong-Drive SD Connector screws install with a 1/4" hex-head driver (model DBHEX)
  • Strong-Drive SDWH Timber-Hex HDG screws install with a 3/8" hex-head driver (model DB6H1.75)

Related Literature

Wood Construction Connectors 2019-2020
C-C-2019
A catalog including new product information as well as any applicable specification and installation instructions for wood-to-wood and wood-to-concrete structural connectors.
Catalog
Conectores para la construcción con madera 2019–2020
C-C-2019SP
El catálogo incluye información sobre nuevos productos, así como especificaciones e instrucciones de instalación aplicables para conectores estructurales de madera a madera y de madera a concreto.
Catalog
High Wind-Resistant Construction Application Guide
F-C-HWRCAG16
The newly updated High Wind-Resistant Construction Application Guide offers new applications, updated loads, as well as more fastening information that is used to resist high-wind.
Product Guide
Deck Connection and Fastening Guide
F-DECKCODE17
A guide to recognizing deck deficiencies and building safer, stronger, longer-lasting outdoor deck structures.
Product Guide
Do Your Decks Meet Code?
DIY-DECKPATIO18
A tearpad showing deck connections on one side and patio cover system connections on the other.
Flier
Flood-Resistant Construction Guide for Flood-Prone Regions
F-C-FLOODCON13
This flier is designed to educate Specifiers, Building Officials, and Dealers about how to build code-compliant structures to resist the forces created by flooding and high wind.
Flier
Strong-Tie DIY - Projects for a strong and beautiful home
S-HOMEPRJCTS18
A booklet featuring practical and attractive DIY projects for home and yard using Simpson Strong-Tie® connectors and fasteners, including Outdoor Accents®.
Flier
Strong-Tie DIY - Proyectos para una casa resistente y hermosa
S-HOMPRJCTS18SP
Un catálogo con proyectos prácticos y atractivos DIY para el hogar y el patio que utilizan conectores y sujetadores Simpson Strong-Tie® y accesorios Outdoor Accents®.
Flier
Code-compliant Guardrail Post Connections
T-C-GRDRLPST17
A technical bulletin providing technical information about guardrail post connections using DTT2, HD3BHDG and HTT4.
Technical Bulletin
Connector Solutions to Meet the Wall-Bracing Requirements of the 2012/2015 International Residential Code®
T-C-WALLBRACE17
A technical bulletin providing technical information about wall bracing methods and code sections that require connectors (e.g., holdowns or straps) and anchors.
Technical Bulletin
Installation Options for Deck Lateral Load Connections
T-C-DECKLAT19
A technical bulletin featuring installation options for deck lateral load connections using the DTT1Z and DTT2Z.
Technical Bulletin
DTT2 Supporting a Beam
L-C-DTT2BEAM19
DTT2 Tension Tie Supporting a Beam.
Engineering Letter
Stainless-Steel Holdowns
L-C-SSHD18
Simpson Strong-Tie® Stainless-Steel Holdowns
Engineering Letter

Load Tables

    These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

    For stainless-steel fasteners, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

    Many of these products are approved for installation with Strong-Drive® SD Connector screws.

DTT Deck Tension Ties Load Table
  1. Allowable loads have been increased for wind or earthquake loading with no further increase allowed. Reduce where other loads govern.
  2. DTT1Z installations with allowable loads below 750 lb. do not satisfy the 2015 IRC requirements for deck-to-house lateral load connections.
  3. The Strong-Drive® SDWH Timber-Hex HDG screw with a minimum of 3" thread penetration into dry lumber has an allowable withdrawal load (160) of 1,380 lb. into SP, 1225 lb. into DF, and 1,020 lb. into SPF/HF.
  4. Load values are valid if the product is flush with the end of the framing member or installed away from the end.
  5. The guardrail post illustration above addresses an outward force on the guardrail. An additional DTT2Z can be added at the lower bolt to address an inward force.
  6. A 3/8" HDG round washer is required with the use of a lag screw.
  7. Fasteners: Nail dimensions in the table are diameter by length. SD and SDS screws are Simpson Strong-Tie® Strong-Drive® screws. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products