Roofing Nail — Smooth Shank
Product Details
Key Features
- Large, flat head provides extra bearing surface to firmly secure roofing material
- Roofing nail lengths are ideal for some roof tiles and slate
Related Links
Simpson Strong-Tie® Nail Consolidation
Simpson Strong-Tie is dedicated to continuously expanding our line of Fastening Systems solutions with innovative new products that address the changing needs of our customers. As new fastener solutions and nail products are evaluated per their application and market space, it became necessary to consolidate our various bulk/hand-drive stainless-steel nail offerings in the name of efficiency and product-line simplicity. These products are no longer included in our product lineup going forward with our new catalog.
While technical information for discontinued products will be maintained on our website for a number of months, Simpson Strong-Tie asks that our customers begin to replace these products in their designs and inventories. While it is hard to say when the discontinued items will no longer be available from our distribution partners, stock production will be ending by the end of 2023, and the products will phase out as we sell through inventories based on customer demand.
Simpson Strong-Tie recommends using the Fastener Finder application to find alternatives for the products on this page.
If you have questions about any of the products shown below, please call (800) 999-5099 for assistance.
Product Information Table
| Model No. | Coating/Material | Ga. | Penny Size | Length (in.) | Head Diameter (in.) | Shank Diameter (in.) | Shank Type | Head Type | Head Pattern | Point Type | Approx. Count per Lb. | Packaging Qty. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S310RNB | Type 304 Stainless Steel | 10 | 3d | 1 1/4 | 3/8 | 0.131 | Smooth Shank | Full Round Head | Smooth Head | Diamond Point | 166 | 25 |
| S410RNB | Type 304 Stainless Steel | 10 | 4d | 1 1/2 | 3/8 | 0.131 | Smooth Shank | Full Round Head | Smooth Head | Diamond Point | 139 | 25 |
| S511RNB | Type 304 Stainless Steel | 11 | 5d | 1 3/4 | 3/8 | 0.120 | Smooth Shank | Full Round Head | Smooth Head | Diamond Point | 149 | 25 |
| S610RNB | Type 304 Stainless Steel | 10 | 6d | 2 | 3/8 | 0.131 | Smooth Shank | Full Round Head | Smooth Head | Diamond Point | 105 | 25 |
| S810RNB | Type 304 Stainless Steel | 10 | 8d | 2 1/2 | 3/8 | 0.131 | Smooth Shank | Full Round Head | Smooth Head | Diamond Point | 91 | 25 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|