We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

MIU Medium Face-Mount I-Joist Hanger

MIU

On This Page

The MIU hanger is designed for commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation.

Key Features

  • Extra optional triangle holes for additional load
  • Models will normally accommodate a skew of up to 5°
  • MIU-series hangers are tested, load rated and code compliant

Material

  • 16 gauge

Finish

  • Galvanized

Installation

  • Use all specified fasteners. Verify that the header can take the required fasteners specified in the table. See General Connector Installation for more information.

Uplift Loads

  • Models have optional triangle joist nail holes for additional uplift. Properly attached web stiffeners are required.
  • MIU — add four additional 0.148" x 1 1/2" joist nails for a total uplift load of 975 lb.

Options

MIU hangers cannot be modified. However, these models will normally accommodate a skew of up to 5°. For sloped joists up to 1/4:12 there is no reduction; between 1/4:12 and up to 1/2:12, tests show a 10% reduction in ultimate hanger strength. Local crushing of the bottom flange or excessive deflection may be limiting; check with joist manufacturer for specific limitations on bearing of this type.

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Joist Size Ga. W (in.) H (in.) B (in.) Coating/Material Packaging Qty.
MIU1.56/11 1-1/2 in. X 11-7/8 in. 16 1 9/16 11 1/16 2 1/2 Zinc Galvanized, G90 1
MIU1.56/9 1-1/2 in. X 9-1/2 in. 16 1 9/16 8 15/16 2 1/2 Zinc Galvanized, G90 1
MIU1.81/11 1-3/4 in. x 11-7/8 in. 16 1 13/16 11 1/16 2 1/2 Zinc Galvanized, G90 1
MIU1.81/14 1-3/4 in. x 14 in. 16 1 13/16 13 5/16 2 1/2 Zinc Galvanized, G90 1
MIU1.81/16 1-3/4 in. x 16 in. 16 1 13/16 15 5/16 2 1/2 Zinc Galvanized, G90 1
MIU1.81/18 1-3/4 in. x 18–20 in. 16 1 13/16 17 5/16 2 1/2 Zinc Galvanized, G90 1
MIU1.81/9 1-3/4 in. x 9-1/4 in. to 9-1/2 in. 16 1 13/16 8 13/16 2 1/2 Zinc Galvanized, G90 1
MIU2.1/11 2-1/16 in. X 11-7/8 in. 16 2 1/8 11 1/16 2 1/2 Zinc Galvanized, G90 1
MIU2.37/11 2-5/16 in. x 11-7/8 in. 16 2 3/8 11 1/16 2 1/2 Zinc Galvanized, G90 1
MIU2.37/14 2-5/16 in. x 14 in. 16 2 3/8 13 1/2 2 1/2 Zinc Galvanized, G90 1
MIU2.37/16 2-5/16 in. x 16 in. 16 2 3/8 15 1/2 2 1/2 Zinc Galvanized, G90 1
MIU2.37/18 2-5/16 in. x 18 in. 16 2 3/8 17 1/2 2 1/2 Zinc Galvanized, G90 1
MIU2.37/20 2-5/16 in. X 20 in. 16 2 3/8 19 1/2 2 1/2 Zinc Galvanized, G90 1
MIU2.37/9 2-5/16 in. x 9-1/2 in. 16 2 3/8 9 2 1/2 Zinc Galvanized, G90 1
MIU2.56/11 2-1/2 in. x 11-7/8 in. 16 2 9/16 11 1/16 2 1/2 Zinc Galvanized, G90 1
MIU2.56/14 2-1/2 in. X 14 in. 16 2 9/16 13 7/16 2 1/2 Zinc Galvanized, G90 1
MIU2.56/16 2-1/2 in. x 16 in. 16 2 9/16 15 7/16 2 1/2 Zinc Galvanized, G90 1
MIU2.56/18 2-1/2 in. x 18 in. 16 2 9/16 17 7/16 2 1/2 Zinc Galvanized, G90 1
MIU2.56/20 2-1/2 in. x 20 in. 16 2 9/16 19 7/16 2 1/2 Zinc Galvanized, G90 1
MIU2.56/9 2-1/2 in. x 9-1/2 in. 16 2 9/16 8 15/16 2 1/2 Zinc Galvanized, G90 1
MIU3.12/11 3 in. x 11-7/8 in. 16 3 1/8 11 1/8 2 1/2 Zinc Galvanized, G90 1
MIU3.12/9 3 in. x 9-1/2 in. 16 3 1/8 9 1/16 2 1/2 Zinc Galvanized, G90 1
MIU3.56/11 3-1/2 in. x 11-1/4 in. to 11-7/8 in. 16 3 9/16 11 1/8 2 1/2 Zinc Galvanized, G90 1
MIU3.56/14 3-1/2 in. x 14 in. 16 3 9/16 13 5/16 2 1/2 Zinc Galvanized, G90 1
MIU3.56/16 3-1/2 in. x 16 in. 16 3 9/16 15 5/16 2 1/2 Zinc Galvanized, G90 1
MIU3.56/18 3-1/2 in. x 18 in. 16 3 9/16 17 5/16 2 1/2 Zinc Galvanized, G90 1
MIU3.56/20 3-1/2 in. x 20 in. 16 3 9/16 19 5/16 2 1/2 Zinc Galvanized, G90 1
MIU3.56/7 3-1/2 in. x 7 in. 16 3 9/16 7 2 1/2 Zinc Galvanized, G90 1
MIU3.56/9 3-1/2 in. x 9-1/2 in. 16 3 9/16 8 13/16 2 1/2 Zinc Galvanized, G90 1
MIU4.12/11 4 in. X 11-7/8 in. 16 4 1/8 11 1/8 2 1/2 Zinc Galvanized, G90 1
MIU4.12/14 4 in. x 14 in. 16 4 1/8 13 9/16 2 1/2 Zinc Galvanized, G90 1
MIU4.12/16 4 in. X 16 in. 16 4 1/8 15 9/16 2 1/2 Zinc Galvanized, G90 1
MIU4.12/9 4 in. X 9-1/2 in. 16 4 1/8 9 1/16 2 1/2 Zinc Galvanized, G90 1
MIU4.28/11 4-1/8 in. x 11-7/8 in. 16 4 1/4 11 1/8 2 1/2 Zinc Galvanized, G90 1
MIU4.28/14 4-1/8 in. x 14 in. 16 4 1/4 13 1/2 2 1/2 Zinc Galvanized, G90 1
MIU4.28/16 4-1/8 in. x 16 in. 16 4 1/4 15 1/2 2 1/2 Zinc Galvanized, G90 1
MIU4.28/9 4-1/8 in. X 9-1/2 in. 16 4 1/4 9 2 1/2 Zinc Galvanized, G90 1
MIU4.75/11 4-5/8 in. x 11-1/4 in. to 11-7/8 in. 16 4 3/4 11 1/16 2 1/2 Zinc Galvanized, G90 1
MIU4.75/14 4-5/8 in. x 14 in. 16 4 3/4 13 1/2 2 1/2 Zinc Galvanized, G90 1
MIU4.75/16 4-5/8 in. x 16 in. 16 4 3/4 15 1/2 2 1/2 Zinc Galvanized, G90 1
MIU4.75/18 4-5/8 in. x 18 in. 16 4 3/4 17 1/2 2 1/2 Zinc Galvanized, G90 1
MIU4.75/20 4-5/8 in. x 20 in. 16 4 3/4 19 1/2 2 1/2 Zinc Galvanized, G90 1
MIU4.75/9 4-5/8 in. x 9-1/4 in to 9-1/2 in. 16 4 3/4 9 1/16 2 1/2 Zinc Galvanized, G90 1
MIU5.12/11 5 in. x 11-1/4 in. to 11-7/8 in. 16 5 1/8 11 1/8 2 1/2 Zinc Galvanized, G90 1
MIU5.12/14 5 in. x 14 in. 16 5 1/8 13 5/16 2 1/2 Zinc Galvanized, G90 1
MIU5.12/16 5 in. x 16 in. 16 5 1/8 15 5/16 2 1/2 Zinc Galvanized, G90 1
MIU5.12/18 5 in. X 18 in. 16 5 1/8 17 5/16 2 1/2 Zinc Galvanized, G90 1
MIU5.12/20 5 in. X 20 in. 16 5 1/8 19 5/16 2 1/2 Zinc Galvanized, G90 1
MIU5.12/7 5 in. X 7 in. 16 5 1/8 7 2 1/2 Zinc Galvanized, G90 1
MIU5.12/9 5 in. X 9-1/2 in. 16 5 1/8 8 13/16 2 1/2 Zinc Galvanized, G90 1

Load Tables

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT