We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

text.skipToContent text.skipToNavigation

SUR/SUL/HSUR/HSUL Skewed 45° Hangers

SUR/SUL/HSUR/HSUL

On This Page

The SUR/L1.81, 2.06, 2.1, 2.37, 2.56 and HSUR/L series are 45° skewed hangers designed specifically to ease the installation of single and double I-joists. In addition to featuring positive-angle nailing, these hangers encapsulate the top flange of the I-joist, so no web stiffeners are required for standard installation.

The full range of 45° skewed hangers feature obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist. Installation is further simplified with no required bevel cuts.

Material

  • SUR and SUL — 16 gauge; HSUR and HSUL — 14 gauge

Finish

  • Galvanized. Some products available in ZMAX® coating. See Corrosion Information.

Installation

  • Use all specified fasteners. See General Notes.
  • Illustrations show left and right skews SUR/L (SUR = skewed right; SUL = skewed left).
  • The joist end may be square cut or bevel cut.
  • Fill all round and obround nail holes with specified fasteners to achieve table loads. Where noted, triangle holes in the joist flange may be filled for additional uplift capacity.
  • For I-joists with flanges less than 1 5/16", web stiffeners are required for all double joist hangers when using hangers that are 14 gauge and lighter.

Options

  • These hangers cannot be modified but will accommodate a 40° to 50° skewed joist.
  • Available with the A2 flange turned in on (2) 2x and 4x models only (see illustration in the image gallery). For example, specify HSURC410, HSULC410, SURC210-2 or SULC210-2.

Related Literature

Load Tables

    These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

    For stainless-steel fasteners, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

    Many of these products are approved for installation with Strong-Drive® SD Connector screws.

SUR/SUL/HSUR/HSUL Skewed 45° Hangers Load Table
  1. Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern.
  2. Triangular nail holes may be filled with 0.148" x 1 1/2" nails for additional uplift (requires web stiffeners).
    • SUR/SUL 9" and 11", SUR/SUL1.81 /14, and all HSUR/HSUL models have additional holes that, when filled, can resist 795 lb. for DF/SP or 685 lb. for SPF/HF.
    • SUR/SUL 14" models have (6) additional holes that, when filled, can resist 1,190 lb. for DF/SP and 1,025 lb. for SPF/HF.
  3. When the supported member is an I-joist with flanges less than 1 5/16" thick, the allowable uplift shall not exceed 190 lb. without web stiffeners.
  4. Allowable downloads are based on a joist-bearing capacity of 750 psi.
  5. Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.
Allowable Loads for SUR, SUL, HSUR, and HSUL Model Hangers with SD Screws
Actual Joist Size Model No. Web Stiff Reqd Ga Dimensions Fasteners DF/SP Allowable Loads (lbs) SD Screws SPF/HF Allowable Loads (lbs) SD Screws
W H B A1 A2 Face Joist Uplift (100) Uplift2 (160) Floor (100) Snow (115) Roof (125) Wind (160) Uplift (100) Uplift2 (160) Floor (100) Snow (115) Roof (125) Wind (160)
  1. Uplift loads have been increased for wind or earthquake loading with no further increase allowed: reduce where other loads govern.
  2. Triangle nail holes may be filled (requires web stiffeners) with SD9112 screws for additional uplift
    • SUR/SUL 9- and 11- inch and all HSUR/HSUL models have (4) additional holes, that when filled can resist 715 lbs. for Douglas Fir or Southern Pine or 615 lbs. for SPF/HF.
    • SUR/SUL 14- inch models have (6) additional holes, that when filled can resists 970 lbs. for DF/SP and 835 lbs. for SPF/HF.
  3. When the supported member is an I-joist with flanges less than 1 5/16 inches thick, the allowable uplift shall not exceed 155 lbs. without web stiffeners.
  4. Allowable downloads are based on a joist bearing capacity of 750 psi for EWP, 565 psi for DF/SP solid sawn lumber, and 425 psi for SPF/HF solid sawn lumber.
2x4 SUR/L24 16 1 9/16 3 1/32 2 1 1/8 1 1/4 (4) SD9112 (4) SD9112 410 410 685 700 700 700 350 350 450 515 560 605
2x6,8 SUR/L26 16 1 9/16 5 2 1 1/8 1 5/16 (6) SD9112 (6) SD9112 670 670 870 870 870 870 575 575 670 750 750 750
1 1/2 x 9 1/4-12 SUR/L210 16 1 9/16 8 1/8 2 1 1/8 1 5/16 (10) SD9112 (10) SD9112 1325 1325 1710 1725 1725 1725 1120 1140 1120 1290 1400 1485
1 1/2 x 10-16 SUR/L214 16 1 9/16 10 2 1 1/8 1 5/16 (12) SD9112 (12) SD9112 1630 1630 2050 2070 2070 2070 1345 1400 1345 1545 1680 1780
1 3/4 x 9 1/4-9 1/2 SUR/L1.81/9 - 16 1 13/16 9 3 1/8 1 5/8 2 5/16 (12) SD9112 (2) SD9112 145 145 2050 2060 2060 2060 125 125 1345 1545 1680 1770
1 3/4 x 11 1/4 -11 7/8 SUR/L1.81/11 - 16 1 13/16 11 3 1/8 1 5/8 2 5/16 (16) SD9112 (2) SD9112 145 145 2080 2080 2080 2080 125 125 1790 1790 1790 1790
1 3/4 x 14 SUR/L1.81/14 - 16 1 13/16 13 3/4 3 1/8 1 5/8 2 5/16 (20) SD9112 (2) SD9112 145 145 2100 2100 2100 2100 125 125 1805 1805 1805 1805
2 x 9 1/2 SUR/L2.06/9 - 16 2 1/16 9 3/32 3 3/16 1 5/8 2 1/8 (14) SD9112 (2) SD9112 145 145 1795 1795 1795 1795 125 125 1545 1545 1545 1545
2 x 11 7/8 SUR/L2.06/11 - 16 2 1/16 11 7/32 3 3/16 1 5/8 2 1/8 (16) SD9112 (2) SD9112 145 145 2080 2080 2080 2080 125 125 1790 1790 1790 1790
2 x 14 SUR/L2.06/14 - 16 2 1/16 13 19/32 3 3/16 1 5/8 2 1/8 (18) SD9112 (2) SD9112 145 145 2100 2100 2100 2100 125 125 1805 1805 1805 1805
2 x 16 SUR/L2.06/14 16 2 1/16 13 19/32 3 3/16 1 5/8 2 1/8 (18) SD9112 (2) SD9112 145 145 2100 2100 2100 2100 125 125 1805 1805 1805 1805
2 1/16 x 9 1/2 SUR/L2.1/9 - 16 2 1/8 9 1/16 3 3/16 1 9/16 2 1/8 (14) SD9112 (2) SD9112 145 145 1795 1795 1795 1795 125 125 1545 1545 1545 1545
2 1/16 x 11 7/8 SUR/L2.1/11 - 16 2 1/8 11 3/16 3 3/16 1 9/16 2 1/8 (16) SD9112 (2) SD9112 145 145 2080 2080 2080 2080 125 125 1790 1790 1790 1790
2 1/16 x 14 SUR/L2.1/14 - 16 2 1/8 13 9/16 3 3/16 1 9/16 2 1/8 (18) SD9112 (2) SD9112 145 145 2100 2100 2100 2100 125 125 1805 1805 1805 1805
2 1/16 x 16 SUR/L2.1/14 16 2 1/8 13 9/16 3 3/16 1 9/16 2 1/8 (18) SD9112 (2) SD9112 145 145 2100 2100 2100 2100 125 125 1805 1805 1805 1805
2 1/4 -2 5/16 x 9 1/2 SUR/L2.37/9 - 16 2 3/8 8 15/16 3 3/16 1 5/16 2 1/8 (14) SD9112 (2) SD9112 145 145 1795 1795 1795 1795 125 125 1545 1545 1545 1545
2 1/4 -2 5/16 x 11 7/8 SUR/L2.37/11 - 16 2 3/8 11 3/16 3 3/16 1 5/16 2 1/8 (16) SD9112 (2) SD9112 145 145 2080 2080 2080 2080 125 125 1790 1790 1790 1790
2 1/4 -2 5/16 x 14 SUR/L2.37/14 - 16 2 3/8 13 7/16 3 3/16 1 5/16 2 1/8 (18) SD9112 (2) SD9112 145 145 2100 2100 2100 2100 125 125 1805 1805 1805 1805
2 1/4 -2 5/16 x 16 SUR/L2.37/14 16 2 3/8 13 7/16 3 3/16 1 5/16 2 1/8 (18) SD9112 (2) SD9112 145 145 2100 2100 2100 2100 125 125 1805 1805 1805 1805
2 1/2 x 9 1/2 (3x10,12) SUR/L2.56/9 - 16 2 9/16 8 27/32 3 3/16 1 1/8 2 1/8 (14) SD9112 (2) SD9112 145 145 1795 1795 1795 1795 125 125 1545 1545 1545 1545
2 1/2 -2 9/16 x 11 1/4 -11 7/8 SUR/L2.56/11 - 16 2 9/16 11 3/16 3 3/16 1 1/8 2 1/8 (16) SD9112 (2) SD9112 145 145 2080 2080 2080 2080 125 125 1790 1790 1790 1790
2 1/2 x 14 (3 x 14) SUR/L2.56/14 - 16 2 9/16 13 11/32 3 3/16 1 1/8 2 1/8 (18) SD9112 (2) SD9112 145 145 2100 2100 2100 2100 125 125 1805 1805 1805 1805
2 1/2 x 16 SUR/L2.56/14 16 2 9/16 13 11/32 3 3/16 1 1/8 2 1/8 (18) SD9112 (2) SD9112 145 145 2100 2100 2100 2100 125 125 1805 1805 1805 1805
3 x 6 -8 SUR/L26-2 16 3 1/8 4 15/16 2 5/8 1 7/16 2 3/8 (8) SD9112 (4) SD9112 670 670 870 870 870 870 450 575 750 750 750 750
HSUR/L26-2 14 3 1/8 4 15/16 2 7/16 1 1/4 2 3/16 (12) SD9212 (4) SD9112 800 825 1620 1620 1620 1620 450 710 1345 1395 1395 1395
3 x 9 1/4 -14 SUR/L210-2 16 3 1/8 8 11/16 2 5/8 1 7/16 2 3/8 (14) SD9112 (6) SD9112 915 915 1835 1835 1835 1835 670 785 1570 1580 1580 1580
HSUR/L210-2 14 3 1/8 8 11/16 2 7/16 1 1/4 2 3/16 (20) SD9212 (6) SD9212 1195 1195 2145 2145 2145 2145 670 1025 1845 1845 1845 1845
3 x 14 -20 SUR/L214-2 16 3 1/8 12 11/16 2 1/2 1 7/16 2 1/8 (18) SD9112 (8) SD9112 1200 1200 2430 2430 2430 2430 895 1030 2015 2090 2090 2090
HSUR/L214-2 14 3 1/8 12 11/16 2 7/16 1 1/4 2 3/16 (26) SD9212 (8) SD9212 1205 1205 2535 2535 2535 2535 895 1035 2180 2180 2180 2180
4 x 6 -8 SUR/L46 16 3 9/16 4 3/4 2 5/8 1 2 3/8 (8) SD9112 (4) SD9112 670 670 870 870 870 870 450 575 750 750 750 750
HSUR/L46 14 3 9/16 4 3/4 2 7/16 1 2 3/16 (12) SD9212 (4) SD9212 800 825 1620 1620 1620 1620 450 710 1345 1395 1395 1395
3 1/2 x 9 1/4 -14 SUR/L410 16 3 9/16 8 15/32 2 5/8 1 2 3/8 (14) SD9112 (6) SD9112 915 915 1835 1835 1835 1835 670 785 1570 1580 1580 1580
HSUR/L410 14 3 9/16 8 15/32 2 7/16 1 2 3/16 (20) SD9212 (6) SD9212 1195 1195 2405 2405 2405 2405 670 1025 2065 2065 2065 2065
3 1/2 x 14 -20 SUR/L414 16 3 9/16 12 1/2 2 5/8 1 2 3/8 (18) SD9112 (8) SD9112 1200 1200 2430 2430 2430 2430 895 1030 2015 2090 2090 2090
HSUR/L414 14 3 9/16 12 15/32 2 7/16 1 2 3/16 (26) SD9212 (8) SD9212 1205 1205 2535 2535 2535 2535 895 1035 2180 2180 2180 2180
4 x 9 1/2 HSUR/L4.12/9 - 14 4 1/8 9 3 1/16 1 7/16 2 3/8 (12) SD9212 (2) SD9212 125 125 1885 1885 1885 1885 125 125 1345 1545 1620 1620
4 x 11 7/8 HSUR/L4.12/11 - 14 4 1/8 11 3 1/16 1 7/16 2 3/8 (16) SD9212 (2) SD9212 125 125 2185 2185 2185 2185 125 125 1790 1880 1880 1880
4 x 14 HSUR/L4.12/14 - 14 4 1/8 13 3/4 3 1/16 1 7/16 2 3/8 (20) SD9212 (2) SD9212 125 125 2490 2490 2490 2490 125 125 2140 2140 2140 2140
4 x 16 HSUR/L4.12/16 - 14 4 1/8 15 3/4 3 1/16 1 7/16 2 3/8 (24) SD9212 (2) SD9212 125 125 2490 2490 2490 2490 125 125 2140 2140 2140 2140
4 1/8 x 9 1/2 HSUR/L4.28/9 - 14 4 9/32 9 3 1 7/16 2 3/8 (12) SD9212 (2) SD9212 125 125 1885 1885 1885 1885 125 125 1345 1545 1620 1620
4 1/8 x 11 7/8 HSUR/L4.28/11 - 14 4 9/32 11 1/8 3 1 7/16 2 3/8 (16) SD9212 (2) SD9212 125 125 2185 2185 2185 2185 125 125 1790 1880 1880 1880
4 1/8 x 14 -16 HSUR/L4.28/11 14 4 9/32 11 1/8 3 1 7/16 2 3/8 (16) SD9212 (2) SD9212 125 125 2185 2185 2185 2185 125 125 1790 1880 1880 1880
4 5/8 x 9 1/2 HSUR/L4.75/9 - 14 4 3/4 8 15/16 2 3/4 1 7/16 2 3/8 (12) SD9212 (2) SD9212 125 125 1885 1885 1885 1885 125 125 1345 1545 1620 1620
4 5/8 x 11 7/8 HSUR/L4.75/11 - 14 4 3/4 10 15/16 2 3/4 1 7/16 2 3/8 (16) SD9212 (2) SD9212 125 125 2185 2185 2185 2185 125 125 1790 1880 1880 1880
4 5/8 x 16 HSUR/L4.75/16 - 14 4 3/4 15 3/4 2 3/4 1 7/16 2 3/8 (24) SD9212 (2) SD9212 125 125 2490 2490 2490 2490 125 125 2140 2140 2140 2140
5 x 9 1/2 HSUR/L5.12/9 - 14 5 1/8 9 2 13/16 1 7/16 2 3/8 (12) SD9212 (2) SD9212 125 125 1885 1885 1885 1885 125 125 1345 1545 1620 1620
5 x 11 7/8 HSUR/L5.12/11 - 14 5 1/8 11 2 13/16 1 7/16 2 3/8 (16) SD9212 (2) SD9212 125 125 2185 2185 2185 2185 125 125 1790 1880 1880 1880
5 x 14 HSUR/L5.12/14 - 14 5 1/8 13 3/4 2 13/16 1 7/16 2 3/8 (20) SD9212 (2) SD9212 125 125 2490 2490 2490 2490 125 125 2140 2140 2140 2140
5 x 16 HSUR/L5.12/16 - 14 5 1/8 15 3/4 2 13/16 1 7/16 2 3/8 (24) SD9212 (2) SD9212 125 125 2490 2490 2490 2490 125 125 2140 2140 2140 2140

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT