We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

text.skipToContent text.skipToNavigation

Face-Mount Joist Hanger

U

On This Page

Face-Mount Hangers for Engineered Wood

This product's information may differ depending on the category of use. You are currently viewing details related to Face-Mount Hangers for Engineered Wood. You can also view product information related to the category: Face-Mount Hangers for Solid Sawn Lumber

The U is designed for joist-to-header installation in wood-framed construction. This face-mount hanger is engineered for strength and provides easy installation. The U hanger is precision-formed and manufactured to the highest quality standards.

Key Features

  • U-series hangers are tested, load rated and code compliant
  • The U series installs using several fastener selections with tested allowable loads

Material

  • 16 gauge

Finish

  • Galvanized. Some products available in ZMAX® coating or stainless steel; see Corrosion Information.

Installation

  • Use all specified fasteners; see General Notes
  • Joists sloped up to 1/4:12 achieve table loads
  • When nailing into solid sawn carrying member's end grain, the allowable load is adjusted by a factor of 0.67

Options

  • For ease of ordering, refer to technical bulletin U/HU Hangers (T-C-U-HU-WS)

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Ga. W (in.) H (in.) B (in.) Coating/Material Packaging Qty.
U14 16 1 13/16 10 1/4 2 Zinc Galvanized, G90 1
U2.1/4 16 2 1/8 3 1/2 2 Zinc Galvanized, G90 1
U210 16 1 9/16 7 13/16 2 Zinc Galvanized, G90 1
U210-2 16 3 1/8 8 1/2 2 Zinc Galvanized, G90 1
U210-3 16 4 5/8 7 3/4 2 Zinc Galvanized, G90 1
U210R 16 2 9 1/8 2 Zinc Galvanized, G90 1
U210Z 16 1 9/16 7 13/16 2 ZMAX® 1
U214 16 1 9/16 10 2 Zinc Galvanized, G90 1
U24 16 1 9/16 3 1/8 1 1/2 Zinc Galvanized, G90 1
U24-2 16 3 1/8 3 2 Zinc Galvanized, G90 1
U24R 16 2 3 5/8 2 Zinc Galvanized, G90 1
U26 16 1 9/16 4 3/4 2 Zinc Galvanized, G90 1
U26-2 16 3 1/8 5 2 Zinc Galvanized, G90 1
U26-3 16 4 5/8 4 1/4 2 Zinc Galvanized, G90 1
U26R 16 2 5 5/8 2 Zinc Galvanized, G90 1
U310 16 2 9/16 8 7/8 2 Zinc Galvanized, G90 1
U314 16 2 9/16 10 1/2 2 Zinc Galvanized, G90 1
U34 16 2 9/16 3 3/8 2 Zinc Galvanized, G90 1
U3510/14 16 2 5/16 9 2 Zinc Galvanized, G90 1
U3510-2 16 4 3/4 8 3/4 2 Zinc Galvanized, G90 1
U3512-2 16 4 3/4 11 1/4 2 Zinc Galvanized, G90 1
U3516/20 16 2 5/16 10 9/16 2 Zinc Galvanized, G90 1
U36 16 2 9/16 5 3/8 2 Zinc Galvanized, G90 1
U410 16 3 9/16 8 3/8 2 Zinc Galvanized, G90 1
U410R 16 4 8 1/8 2 Zinc Galvanized, G90 1
U414 16 3 9/16 10 2 Zinc Galvanized, G90 1
U44 16 3 9/16 2 7/8 2 Zinc Galvanized, G90 1
U44R 16 4 2 5/8 2 Zinc Galvanized, G90 1
U46 16 3 9/16 4 7/8 2 Zinc Galvanized, G90 1
U46R 16 4 4 5/8 2 Zinc Galvanized, G90 1
U610 16 5 1/2 8 1/2 2 Zinc Galvanized, G90 1
U610R 16 6 8 1/2 2 Zinc Galvanized, G90 1
U66 16 5 1/2 5 2 Zinc Galvanized, G90 1
U66R 16 6 5 2 Zinc Galvanized, G90 1

Load Tables

See Face-Mount Hanger Tables.

See Hanger Options for hanger modifications, which may result in reduced loads.

U Series Modifications and Associated Load Reductions

U/HU/HUC Series Modifications and Associated Load Reductions
  1. Modified seat is sloped, skewed, or both. If sloped only or skewed only, use a smooth-shank stainless-steel reduction of 0.65.
  2. Skews over 50° require a square-cut joist.
Reduction Factor Instructions

Allowable Download = Seat x Flange x Stainless Steel Nails x Other Fastener Substitutions x Table Load
Allowable Uplift =
  0.75 x Face Fastener Type x Table Load for skewed or sloped
  1.00 x Face Fastener Type x Table Load for non-skewed or non-sloped

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT