We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

text.skipToContent text.skipToNavigation

HHUS Extra-Heavy U-Shaped Hanger with Double-Shear Nailing

HHUS

On This Page

Face-Mount Hangers for Plated Truss

This product's information may differ depending on the category of use. You are currently viewing details related to Face-Mount Hangers for Plated Truss. You can also view product information related to the categories of: Face-Mount Hangers for Solid Sawn Lumber, Face-Mount Hangers for Engineered Wood

The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.

Key Features

  • Can be installed after the beam is secured in place
  • Value-engineered hanger designed to carry high loads at an economical price
  • HHUS-series hangers are tested, load rated and code compliant

Material

  • 14 gauge

Finish

  • Galvanized. Some products available in HDG or ZMAX® coating. See Corrosion Information.

Installation

  • Use all specified fasteners; see General Notes.
  • Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
  • Not designed for welded or nailer applications.
  • Do not use double-shear hangers with I-joists.
  • 0.148" x 3 1/4" nails may be used where 0.148" x 3" nails are specified with no reduction in load. Where 0.162" x 3 1/2" nails are specified, 0.148" x 3" or 0.148" x 3 1/4" nails may be used at 0.85 of the table load.
  • With 3x header members, use 0.162" x 2 1/2" (Simpson Strong-Tie® N16) nails in the header and 0.162" x 3 1/2" nails in the joist with no load reduction. With 2x header members, use 0.148" x 1 1/2" nails in the header and 0.148" x 3" nails in the joist, and reduce the load to 0.64 of the table value.

Related Literature

Connectors and Fasteners for Mass Timber Construction Catalog
C-C-MASSTIMBER20
A catalog featuring connectors and fasteners for mass timber construction solutions.
Catalog
Wood Construction Connectors 2019-2020
C-C-2019
A catalog including new product information as well as any applicable specification and installation instructions for wood-to-wood and wood-to-concrete structural connectors.
Catalog
Conectores para la construcción con madera 2019–2020
C-C-2019SP
El catálogo incluye información sobre nuevos productos, así como especificaciones e instrucciones de instalación aplicables para conectores estructurales de madera a madera y de madera a concreto.
Catalog
ICF Connectors
F-C-ICFVL19
A flier featuring installation instructions for the ICFVL ledger connector system and provides information on the various products we have to serve the ICF market.
Flier
ICF Connectors
F-C-ICFVLCAN19
A flier providing product and installation information about the various Simpson Strong-Tie products available to serve the ICF Ledger Connector Systems in Canada.
Flier
General Hanger Installer's Guide
F-C-CANTRUHGR18
An installer's guide for Canadian Limit States providing instructions for the most common hangers.
Flier
Plated-Truss Connectors Installation Guide
WC-C-PTBI18
A wall chart for plated-truss connectors in English and Spanish.
Installation Guide
Allowable Loads for Joist Hangers with Gaps
T-C-HANGERGAP18
A technical bulletin explaining how allowable loads for joist and truss hangers are affected for gaps between the end of the carried member and carrying member.
Technical Bulletin
Allowable Loads for Reduced Truss Heel Heights
T-C-REDHEEL20
A technical bulletin providing information for selecting hangers for a truss-to-truss connection and including technical information, illustrations and tables.
Technical Bulletin
LUL/LUS/HUS/HGUS - 10-d x 1 1/2" (N10) Option Standard and Double Shear Face Mount Joist Hangers
T-C-N10TRSSCN18
A technical bulletin featuring updated load tables of standard and double-shear face-mount joist hangers commonly used in Canadian truss construction.
Technical Bulletin
Connector Selection Guide for Residential Construction/Pacific Woodtech
CSG-PWC19
A guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by Pacific Woodtech.
Connector Selection Guide
Connector Selector Guide For Use with Products Manufactured by XBEAM
CSG-XBEAM19
A guide listing popular Simpson Strong-Tie hangers for use with engineered wood products manufactured by XBEAM.
Connector Selection Guide
Engineered Wood/SCL Connector Guide
WC-C-EWPBI19
A bilingual (English-Spanish) wall chart featuring product and installation illustrations of top-selling EWP/SCL connectors.

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Ga. W (in.) H (in.) B (in.) Coating/Material Packaging Qty.
HHUS210-2 14 3 5/16 9 3/16 3 Zinc Galvanized, G90 1
HHUS210-2HDG 14 3 5/16 9 3/16 3 Hot-Dip Galvanized 1
HHUS210-2Z 14 3 5/16 9 3/16 3 ZMAX® 1
HHUS210-3 14 4 11/16 8 7/8 3 Zinc Galvanized, G90 1
HHUS210-3HDG 14 4 11/16 8 7/8 3 Hot-Dip Galvanized 1
HHUS210-4 14 6 1/8 8 7/8 3 Zinc Galvanized, G90 1
HHUS210-4HDG 14 6 1/8 8 7/8 3 Hot-Dip Galvanized 1
HHUS26-2 14 3 5/16 5 3/8 3 Zinc Galvanized, G90 1
HHUS26-2Z 14 3 5/16 5 3/8 3 ZMAX® 1
HHUS28-2 14 3 5/16 7 1/4 3 Zinc Galvanized, G90 1
HHUS28-2Z 14 3 5/16 7 1/4 3 ZMAX® 1
HHUS410 14 3 5/8 9 3 Zinc Galvanized, G90 1
HHUS410HDG 14 3 5/8 9 3 Hot-Dip Galvanized 1
HHUS410Z 14 3 5/8 9 3 ZMAX® 1
HHUS46 14 3 5/8 5 1/8 3 Zinc Galvanized, G90 1
HHUS46HDG 14 3 5/8 5 1/8 3 Hot-Dip Galvanized 1
HHUS46Z 14 3 5/8 5 1/8 3 ZMAX® 1
HHUS48 14 3 5/8 7 1/8 3 Zinc Galvanized, G90 1
HHUS48Z 14 3 5/8 7 1/8 3 ZMAX® 1
HHUS5.50/10 14 5 1/2 9 3 Zinc Galvanized, G90 1
HHUS5.50/10HDG 14 5 1/2 9 3 Hot-Dip Galvanized 1
HHUS7.25/10 14 7 1/4 9 3 5/16 Zinc Galvanized, G90 1
HHUS7.25/10HDG 14 7 1/4 9 3 5/16 Hot-Dip Galvanized 1

Load Tables

    These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

Model No. Min. Heel
Height		 Fasteners (in.) DF/SP Allowable Loads SPF/HF Allowable Loads
Carrying Member Carried Member Uplift (160) Floor (100) Snow (115) Roof (125) Wind (160) Uplift (160) Floor (100) Snow (115) Roof (125) Wind (160)
Double 2x Sizes
HHUS26-2 4 5/16 (14) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 1,320 2,830 3,190 3,415 4,250 1,135 2,435 2,745 2,935 3,655
HHUS28-2 6 9/16 (22) 0.162 x 3 1/2 (8) 0.162 x 3 1/2 1,760 4,265 4,810 5,155 5,980 1,515 3,670 4,135 4,435 5,145
HHUS210-2 8 3/8 (30) 0.162 x 3 1/2 (10) 0.162 x 3 1/2 3,550 5,705 6,435 6,485 6,485 3,335 4,905 5,340 5,060 5,190
Triple 2x Sizes
HHUS210-3 8 3/8 (30) 0.162 x 3 1/2 (10) 0.162 x 3 1/2 3,405 5,630 6,375 6,485 6,485 2,930 4,840 5,485 5,575 5,575
Quadruple 2x Sizes
HHUS210-4 8 3/8 (30) 0.162 x 3 1/2 (10) 0.162 x 3 1/2 3,405 5,630 6,375 6,485 6,485 2,930 4,840 5,485 5,575 5,575
4x Sizes
HHUS46 4 5/16 (14) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 1,320 2,830 3,190 3,415 4,250 1,135 2,435 2,745 2,935 3,655
HHUS48 6 1/2 (22) 0.162 x 3 1/2 (8) 0.162 x 3 1/2 1,760 4,265 4,810 5,155 5,980 1,515 3,670 4,135 4,435 5,145
HHUS410 8 3/8 (30) 0.162 x 3 1/2 (10) 0.162 x 3 1/2 3,550 5,705 6,435 6,485 6,485 3,265 4,905 5,535 5,575 5,575
  1. Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern.
  2. Wind (160) is a download rating.
  3. Minimum heel height shown is required to achieve full table loads. For less than minimum heel height, see technical bulletin T-C-REDHEEL.
  4. Truss chord cross-grain tension may limit allowable loads in accordance with ANSI/TPI 1-2014. Simpson Strong-Tie® Connector Selector® software includes the evaluation of cross-grain tension in its hanger allowable loads. For additional information, contact Simpson Strong-Tie.
  5. Loads shown are based on a two-ply 2x carrying member minimum for nailed hangers. With 3x carrying members, use 0.162" x 2 1/2" nails in the header and 0.162" x 3 1/2" in the joist, with no load reduction. With single 2x carrying members, use 0.148" x 1 1/2" nails in the header and 0.148" x 3" in the joist, and reduce the load to 0.64 of the table value.
  6. Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

HHUS — Sloped and/or Skewed Seat

  • HHUS hangers can be skewed to a maximum of 45° and/or sloped to a maximum of 45°
  • For skew only, maximum allowable download is 0.85 of the table load
  • For sloped only or sloped and skewed hangers, the maximum allowable download is 0.65 of the table load
  • Uplift loads for sloped/skewed conditions are 0.72 of the table load, not to exceed 2,475 lb.
  • The joist must be bevel-cut to allow for double shear nailing
Top View HHUS Hanger Skewed Right
Top View HHUS Hanger
Skewed Right
(joist must be bevel cut)
All joist nails installed on the outside angle (non-acute side).

Load Values with Strong-Drive® SD Connector Screws

Allowable Loads for HHUS Model Hangers with SD Screws
Model No. Fasteners DF/SP Allowable Loads (lbs) SPF/HF Allowable Loads (lbs)
Joist Face Uplift (160) Floor (100) Snow (115) Roof (125) Uplift (160) Floor (100) Snow (115) Roof (125)
HHUS26-2 (6) SD10212 (14) SD10212 1300 3660 4010 4010 1120 2815 3240 3445
HHUS28-2 (8) SD10212 (22) SD10212 2065 4370 4370 4370 1775 3760 3760 3760
HHUS210-2 (10) SD10212 (30) SD10212 2825 4735 4735 4735 2430 4070 4070 4070
HHUS210-3 (10) SD10212 (30) SD10212 2825 4735 4735 4735 2430 4070 4070 4070
HHUS210-4 (10) SD10212 (30) SD10212 2825 4735 4735 4735 2430 4070 4070 4070
HHUS46 (6) SD10212 (14) SD10212 1300 3660 4010 4010 1120 2815 3240 3445
HHUS48 (8) SD10212 (22) SD10212 2065 4370 4370 4370 1775 3760 3760 3760
HHUS410 (10) SD10212 (30) SD10212 2825 4735 4735 4735 2430 4070 4070 4070

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products