text.skipToContent text.skipToNavigation

LUS/HUS/HHUS/HGUS Double-Shear Face-Mount Joist Hangers

LUS/HUS/HHUS/HGUS

On This Page

All hangers in this series have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use of standard nails for all connections. (Do not bend or remove tabs.)

Material

  • See tables

Finish

  • Galvanized. Some products available in stainless steel or ZMAX® coating. See Corrosion Information.

Installation

  • Use all specified fasteners; see General Notes.
  • Nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
  • Not designed for welded or nailer applications.
  • 0.148" x 3 1/4" nails may be used where 0.148" x 3" nails are specified with no reduction in load. Where 0.162" x 3 1/2" nails are specified, 0.148" x 3" or 0.148" x 3 1/4" nails may be used at 0.85 of the table load.
  • With 3x carrying members, use 0.162" x 2 1/2" nails into the header and 0.162" x 3 1/2" nails into the joist with no load reduction.
  • With 2x carrying members, use 0.148" x 1 1/2" nails into the header and 0.148" x 3" nails into the joist, reduce the load to 0.64 of the table value.

Options

  • LUS/HUS hangers cannot be modified
  • See load tables below for HHUS/HGUS modifications

Related Literature

Wood Construction Connectors 2019-2020
C-C-2019
A catalog including new product information as well as any applicable specification and installation instructions for wood-to-wood and wood-to-concrete structural connectors.
Catalog
Conectores para la construcción en madera 2017–2018
C-C-2017SP
Información completa de productos, de la aplicación, de las tablas de cargas y de la instalación, para más de 3,000 conectores de madera a madera, madera a concreto y concreto a mampostería.
Catalog
High Wind-Resistant Construction Application Guide
F-C-HWRCAG16
The newly updated High Wind-Resistant Construction Application Guide offers new applications, updated loads, as well as more fastening information that is used to resist high-wind.
Product Guide
Deck Connection and Fastening Guide
F-DECKCODE17
A guide to recognizing deck deficiencies and building safer, stronger, longer-lasting outdoor deck structures.
Product Guide
Do Your Decks Meet Code?
DIY-DECKPATIO18
A tearpad showing deck connections on one side and patio cover system connections on the other.
Flier
A Complete Connector System for Building Decks
DIY-DCKPTIOCA17
A two-sided tearpad for Canada showing the hardware needed for a deck system on one side and the hardware needed for a patio cover system on the other side. Newer product recommendations included.
Flier
General Hanger Installer's Guide
F-C-CANTRUHGR18
An installer's guide for Canadian Limit States providing instructions for the most common hangers.
Flier
Un système de connexion complet pour la construction de terrasses
DIY-DCKPTOCA17F
Un étui à deux faces pour le Canada présentant le matériel nécessaire pour un système de terrasse et un système d’abri de terrasse. Des recommandations de produits plus récentes sont incluses.
Flier
Critical Deck Connections
S-DECKCONCTP18
An educational reference guide for DIY’ers about safe deck construction. The piece outlines the vital components of a deck constructed with a continuous load path in mind.
Flier
Assemblages essentiels d'une terrasse
S-DECKCONCTP18F
Un guide de référence à destination des bricoleurs pour construire des terrasses sûres. Le document décrit les composants essentiels d'une terrasse dotée d'un chemin de charge continu.
Flier
DIY Done Right - Make Your Home Projects Easier
S-HOMEPRJCTS14
A 32-page color brochure showing examples of DIY project ideas using Simpson Strong-Tie® products, including decks, patio covers, fences, and garage organization.
Flier
DIY Done Right - Facilitamos los proyectos para su casa
S-HOMPRJCTS14SP
Flier
Installer's Pocket Guide
S-C-INSTALL16
S-C-INSTALL16 is a guide featuring updated products, new color illustrations and easier navigation. Some popular structural fastening and anchoring products have also been added.
Installation Guide
Plated-Truss Connectors Installation Guide
WC-C-PTBI18
A wall chart for plated-truss connectors in English and Spanish.
Installation Guide
Allowable Loads for Joist Hangers with Gaps
T-C-HANGERGAP18
A technical bulletin explaining how allowable loads for joist and truss hangers are affected for gaps between the end of the carried member and carrying member.
Technical Bulletin
Hangers on Rim Board Headers
T-C-RIMBDHGR18
A technical bulletin discussing when face-mount and top-flange hangers can be used with an engineered “rim board” wood product.
Technical Bulletin
LUL/LUS/HUS/HGUS - 10-d x 1 1/2" (N10) Option Standard and Double Shear Face Mount Joist Hangers
T-C-N10TRSSCN18
A technical bulletin featuring updated load tables of standard and double-shear face-mount joist hangers commonly used in Canadian truss construction.
Technical Bulletin
2012 International Residential Code as Amended by the 2015 Minnesota Residential Code
L-C-MNFNDTN19
This letter provides connector solutions to resist the horizontal top-of-wall reactions listed in Table R404.1(1) of the 2015 Minnesota Residential Code.
Engineering Letter
HUS26 Raised on Bottom Chord
L-C-HUSRAISED18
HUS26 joist hanger raised 1-1/2" on a 2x6 bottom chord with 16dx2-1/2" nails.
Engineering Letter
LUS Installed with 10dx1 1/2" Nails
L-C-LUSREPAIR19
Repair of LUS Joist Hangers Installed with 10dx1 1/2" Nails.
Engineering Letter

Load Tables

See Face Mount Hanger tables.

HHUS — Sloped and/or Skewed Seat

  • HHUS hangers can be skewed to a maximum of 45° and/or sloped to a maximum of 45°
  • For skew only, maximum allowable download is 0.85 of the table load
  • For sloped only or sloped and skewed hangers, the maximum allowable download is 0.65 of the table load
  • Uplift loads for sloped/skewed conditions are 0.72 of the table load, not to exceed 2,475 lb.
  • The joist must be bevel-cut to allow for double-shear nailing

HGUS — Skewed Seat

  • HGUS hangers can be skewed only to a maximum of 45°. Allowable loads are:
    HGUS Seat Width Joist Down Load Uplift
    W < 2" Square cut 0.62 of table load 0.46 of table load
    W < 2" Bevel cut 0.72 of table load 0.46 of table load
    2" < W < 6" Bevel cut 0.85 of table load 0.41 of table load
    2" < W < 6" Square cut 0.46 of table load 0.41 of table load
    W > 6" Bevel cut 0.85 of table load 0.41 of table load
Top View HHUS Hanger Skewed Right
Top View HHUS Hanger
Skewed Right
(joist must be bevel cut)
All joist nails installed on the outside angle (non-acute side).

Load Values with Stainless Steel Nails

Stainless Steel LUS Hangers with Smooth Shank Stainless Steel Nails
Model No. Fasteners DF/SP Allowable Loads SPF/HF Allowable Loads
Header Joist Uplift(160) Floor (100) Snow (115) Roof (125) Uplift(160) Floor (100) Snow (115) Roof (125)
SS10d SS16d SS10d SS16d SS10d SS16d SS10d SS16d SS10d SS16d SS10d SS16d SS10d SS16d
  1. SSA10d, SSA16d nails are Simpson Strong-Tie® ring shank nails.
  2. NAILS: SSA10d = 0.148" dia. X 3" long. SSA16d = 0.162" dia. X 3 1/2" long. See other nail sizes and information.
LUS26SS 4-SS10d - 4-SS10d 915 865 - 990 - 1070 - 805 740 - 845 - 915 -
LUS26-2SS - 4-SS16d 4-SS16d 955 - 1030 - 1180 - 1280 955 - 880 - 1010 - 1090
LUS28SS 6-SS10d - 4-SS10d 915 1100 - 1255 - 1360 - 805 940 - 1075 - 1165 -
LUS28-2SS - 6-SS16d 4-SS16d 955 - 1315 - 1500 - 1625 955 - 1125 - 1285 - 1390
LUS210SS 8-SS10d - 4-SS10d 960 1340 - 1525 - 1650 - 750 1145 - 1305 - 1415 -
LUS210-2SS - 8-SS16d 6-SS16d 1595 - 1830 - 2090 - 2265 1235 - 1565 - 1785 - 1935
Stainless Steel LUS Hangers with Simpson Strong-Tie® Ring-Shank Stainless Steel Nails
Model No. Fasteners DF/SP Allowable Loads SPF/HF Allowable Loads
Header Joist Uplift(160) Floor (100) Snow (115) Roof (125) Uplift(160) Floor (100) Snow (115) Roof (125)
SSA10d SSA16d SSA10d SSA16d SSA10d SSA16d SSA10d SSA16d SSA10d SSA16d SSA10d SSA16d SSA10d SSA16d
  1. SSA10d, SSA16d nails are Simpson Strong-Tie® ring shank nails.
  2. NAILS: SSA10d = 0.148" dia. X 3" long. SSA16d = 0.162" dia. X 3 1/2" long. See other nail sizes and information.
LUS26SS 4-SSA10d - 4-SSA10d 1165 865 - 990 - 1070 - 1005 740 - 845 - 915 -
LUS26-2SS - 4-SSA16d 4-SSA16d 1165 - 1030 - 1180 - 1280 1000 - 880 - 1010 - 1090
LUS28SS 6-SSA10d - 4-SSA10d 1165 1100 - 1255 - 1360 - 1005 940 - 1075 - 1165 -
LUS28-2SS - 6-SSA16d 4-SSA16d 1165 - 1315 - 1500 - 1625 1000 - 1125 - 1285 - 1390
LUS210SS 8-SSA10d - 4-SSA10d 1165 1340 - 1525 - 1650 - 1005 1145 - 1305 - 1415 -
LUS210-2SS - 8-SSA16d 6-SSA16d 1745 - 1830 - 2090 - 2265 1500 - 1565 - 1785 - 1935

Load Values with Strong-Drive® SD Connector Screws

Allowable Loads for LUS Model Hangers with SD Screws
Model No. Fasteners DF/SP Allowable Loads (lbs) SPF/HF Allowable Loads (lbs)
Joist Face Uplift (160) Floor (100) Snow (115) Roof (125) Uplift (160) Floor (100) Snow (115) Roof (125)
LUS24 (2) SD9212 (4) SD9112 495 870 1000 1085 425 605 695 755
LUS26 (4) SD9212 (4) SD9112 1180 1055 1210 1315 1015 760 875 950
LUS28 (4) SD9212 (6) SD9112 1335 1395 1570 1570 1130 985 1135 1230
LUS210 (4) SD9212 (8) SD9112 1240 1735 1995 2170 1065 1210 1390 1510
LUS24-2 (2) SD9212 (4) SD9112 495 870 1000 1085 425 590 680 740
LUS26-2 (4) SD9212 (4) SD9112 1180 1055 1210 1315 1015 735 845 920
LUS28-2 (4) SD9212 (6) SD9112 1335 1395 1570 1570 1100 960 1105 1200
LUS210-2 (6) SD9212 (8) SD9112 1240 1920 2210 2400 1065 1325 1525 1660
LUS214-2 (6) SD9212 (10) SD9112 1995 2265 2605 2830 1645 1550 1785 1940
LUS26-3 (4) SD9212 (4) SD9112 1180 1055 1210 1315 1015 735 845 920
LUS28-3 (4) SD9212 (6) SD9112 1335 1395 1570 1570 1100 960 1105 1200
LUS210-3 (6) SD9212 (8) SD9112 1240 1735 1995 2170 1065 1185 1360 1480
LUS36 (4) SD9212 (4) SD9112 1180 1055 1210 1315 1015 735 845 920
LUS310 (4) SD9212 (6) SD9112 1240 1395 1570 1570 1065 960 1105 1200
LUS44 (2) SD9212 (4) SD9112 495 870 1000 1085 425 590 680 740
LUS46 (4) SD9212 (4) SD9112 1180 1055 1210 1315 1015 735 845 920
LUS48 (4) SD9212 (6) SD9112 1335 1395 1570 1570 1100 960 1105 1200
LUS410 (6) SD9212 (8) SD9112 1240 1920 2210 2400 1065 1325 1525 1660
LUS414 (6) SD9212 (10) SD9112 1995 2265 2605 2830 1645 1550 1785 1940
Allowable Loads for HUS Model Hangers with SD Screws
Model No. Fasteners DF/SP Allowable Loads (lbs) SPF/HF Allowable Loads (lbs)
Joist Face Uplift (160) Floor (100) Snow (115) Roof (125) Uplift (160) Floor (100) Snow (115) Roof (125)
HUS26 (6) SD10212 (14) SD10212 860 3400 3400 3400 740 2815 2920 2920
HUS28 (8) SD10212 (22) SD10212 1490 4180 4180 4180 1280 3145 3340 3475
HUS210 (10) SD10212 (30) SD10212 2120 4695 4965 4965 1820 3475 3720 3885
HUS26-2 (4) SD10212 (4) SD10212 1375 860 990 1075 1260 1010 1160 1265
HUS28-2 (6) SD10212 (6) SD10212 1950 1970 2265 2460 1680 1515 1745 1895
HUS210-2 (8) SD10212 (8) SD10212 2440 2625 3020 3285 2095 2020 2325 2525
HUS212-2 (10) SD10212 (10) SD10212 2830 3285 3775 4105 2430 2525 2905 3155
HUS46 (4) SD10212 (4) SD10212 1465 1315 1510 1640 1260 1010 1160 1265
HUS48 (6) SD10212 (6) SD10212 1950 1970 2265 2460 1680 1515 1745 1895
HUS410 (8) SD10212 (8) SD10212 2440 2625 3020 3285 2095 2020 2325 2525
HUS412 (10) SD10212 (10) SD10212 2830 3285 3775 4105 2430 2525 2905 3155
HUS1.81/10 (10) SD10212 (30) SD10212 2120 4965 4965 4965 1820 3775 4025 4190
Allowable Loads for HHUS Model Hangers with SD Screws
Model No. Fasteners DF/SP Allowable Loads (lbs) SPF/HF Allowable Loads (lbs)
Joist Face Uplift (160) Floor (100) Snow (115) Roof (125) Uplift (160) Floor (100) Snow (115) Roof (125)
HHUS26-2 (6) SD10212 (14) SD10212 1300 3660 4010 4010 1120 2815 3240 3445
HHUS28-2 (8) SD10212 (22) SD10212 2065 4370 4370 4370 1775 3760 3760 3760
HHUS210-2 (10) SD10212 (30) SD10212 2825 4735 4735 4735 2430 4070 4070 4070
HHUS210-3 (10) SD10212 (30) SD10212 2825 4735 4735 4735 2430 4070 4070 4070
HHUS210-4 (10) SD10212 (30) SD10212 2825 4735 4735 4735 2430 4070 4070 4070
HHUS46 (6) SD10212 (14) SD10212 1300 3660 4010 4010 1120 2815 3240 3445
HHUS48 (8) SD10212 (22) SD10212 2065 4370 4370 4370 1775 3760 3760 3760
HHUS410 (10) SD10212 (30) SD10212 2825 4735 4735 4735 2430 4070 4070 4070
HHUS5.50/10 (10) SD10212 (30) SD10212 2825 4735 4735 4735 2430 4070 4070 4070
HHUS7.25/10 (10) SD10212 (30) SD10212 2825 4735 4735 4735 2430 4070 4070 4070
Allowable Loads for HGUS Model Hangers with SD Screws
Model No. Fasteners DF/SP Allowable Loads (lbs) SPF/HF Allowable Loads (lbs)
Joist Face Uplift (160) Floor (100) Snow (115) Roof (125) Uplift (160) Floor (100) Snow (115) Roof (125)
HGUS26 (8) SD10212 (20) SD10212 1725 4500 4500 4500 1485 3870 3870 3870
HGUS28 (12) SD10212 (36) SD10212 1810 6460 6460 6460 1560 5020 5315 5515
HGUS26-2 (8) SD10212 (20) SD10212 1725 4500 4500 4500 1485 3870 3870 3870
HGUS28-2 (12) SD10212 (36) SD10212 1810 6460 6460 6460 1560 5555 5555 5555
HGUS210-2 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7245 7245 7245
HGUS26-3 (8) SD10212 (20) SD10212 1725 4500 4500 4500 1485 3870 3870 3870
HGUS28-3 (12) SD10212 (36) SD10212 1810 6460 6460 6460 1560 5555 5555 5555
HGUS210-3 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7245 7245 7245
HGUS212-3 (20) SD10212 (56) SD10212 3515 8975 8975 8975 3025 7720 7720 7720
HGUS214-3 (22) SD10212 (66) SD10212 3940 9525 9525 9525 3390 8190 8190 8190
HGUS26-4 (8) SD10212 (20) SD10212 1725 4500 4500 4500 1485 3870 3870 3870
HGUS28-4 (12) SD10212 (36) SD10212 1810 6460 6460 6460 1560 5555 5555 5555
HGUS210-4 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7245 7245 7245
HGUS212-4 (20) SD10212 (56) SD10212 3515 8975 8975 8975 3025 7720 7720 7720
HGUS214-4 (22) SD10212 (66) SD10212 3940 9525 9525 9525 3390 8190 8190 8190
HGUS46 (8) SD10212 (20) SD10212 1725 4500 4500 4500 1485 3870 3870 3870
HGUS48 (12) SD10212 (36) SD10212 1810 6460 6460 6460 1560 5555 5555 5555
HGUS410 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7245 7245 7245
HGUS412 (20) SD10212 (56) SD10212 3515 8975 8975 8975 3025 7720 7720 7720
HGUS414 (22) SD10212 (66) SD10212 3940 9525 9525 9525 3390 8190 8190 8190
HGUS2.75/10 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7095 7245 7245
HGUS2.75/12 (20) SD10212 (56) SD10212 3515 8975 8975 8975 3025 7720 7720 7720
HGUS2.75/14 (22) SD10212 (66) SD10212 3940 9525 9525 9525 3390 8085 8190 8190
HGUS3.25/10 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7245 7245 7245
HGUS3.25/12 (20) SD10212 (56) SD10212 3515 8975 8975 8975 3025 7720 7720 7720
HGUS5.25/10 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7245 7245 7245
HGUS5.25/12 (20) SD10212 (56) SD10212 3515 8975 8975 8975 3025 7720 7720 7720
HGUS5.50/8 (12) SD10212 (36) SD10212 1810 6460 6460 6460 1560 5555 5555 5555
HGUS5.50/10 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7245 7245 7245
HGUS5.50/12 (20) SD10212 (56) SD10212 3515 8975 8975 8975 3025 7720 7720 7720
HGUS5.50/14 (22) SD10212 (66) SD10212 3940 9525 9525 9525 3390 8190 8190 8190
HGUS5.62/10 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7245 7245 7245
HGUS5.62/12 (20) SD10212 (56) SD10212 3515 8975 8975 8975 3025 7720 7720 7720
HGUS5.62/14 (22) SD10212 (66) SD10212 3940 9525 9525 9525 3390 8190 8190 8190
HGUS6.88/10 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7245 7245 7245
HGUS6.88/12 (20) SD10212 (56) SD10212 3515 8975 8975 8975 3025 7720 7720 7720
HGUS6.88/14 (22) SD10212 (66) SD10212 3940 9525 9525 9525 3390 8190 8190 8190
HGUS7.25/8 (12) SD10212 (36) SD10212 1810 6460 6460 6460 1560 5555 5555 5555
HGUS7.25/10 (16) SD10212 (46) SD10212 2665 8425 8425 8425 2290 7245 7245 7245
HGUS7.25/12 (20) SD10212 (56) SD10212 3515 6460 6460 6460 3025 5555 5555 5555
HGUS7.25/14 (22) SD10212 (66) SD10212 3940 9525 9525 9525 3390 8190 8190 8190

Code Reports

Part IAPMO UES ER ICC-ES ESR City of Los Angeles State of Florida
HGUSSee specific model numbers for code listings.
HGUS210-3 ESR-2549 ESR-2523 FL10655
HGUS210-4 ESR-2549 ESR-2523 FL10655
HGUS3.25/12 ESR-2552 ESR-2523 FL10531
HGUS46 ESR-2549 ESR-2552 ESR-2523 RR25801 FL10531 FL10655
HHUS210-2 ESR-2549 ESR-2523 RR25807 FL10655
HHUS210-3 FL11468
HHUS210-4 FL11468
HUSSee specific model numbers for code listings.
HUS210 ESR-2549 ESR-2523 RR25801 RR25807 FL10655
HUS210-2 ESR-2549 ESR-2523 RR25807 FL10655
HUS212-2 ESR-2549 ESR-2523 RR25807 FL10655
HUS26 ESR-2549 ESR-2523 ESR-3096 RR25807 RR25910 FL10655
HUS26-2 ESR-2549 ESR-2523 RR25807 FL10655
HUS28 ESR-2549 ESR-2523 ESR-3096 RR25807 RR25910 FL10655
HUS28-2 ESR-2549 ESR-2523 RR25807 FL10655
HUS412 ESR-2549 ESR-2552 ESR-2523 RR25801 RR25807 FL10531 FL10655
HUS46 ESR-2549 ESR-2552 ESR-2523 RR25801 RR25807 FL10531 FL10655
HUS46TF ESR-2553 ESR-2523 RR25800 FL10856
HUS48 ESR-2549 ESR-2552 ESR-2523 RR25801 RR25807 FL10531 FL10655
HUS48TF ESR-2553 ESR-2523 RR25800 FL10856
LUSSee specific model numbers for code listings.
LUS210-2 ESR-2549 ESR-2523 ESR-3096 RR25807 RR25910 FL10655
LUS210-2SSNo evaluation report listing.
LUS210-2Z ESR-2549 ESR-2523 ESR-3096 RR25910 FL10655
LUS210-3 ESR-2549 ESR-2523 FL10655
LUS210-3Z ESR-2549 ESR-2523 FL10655
LUS210SSNo evaluation report listing.
LUS210Z ESR-2549 ESR-2523 ESR-3096 RR25910 FL10655
LUS24Z ESR-2549 ESR-2523 ESR-3096 RR25807 RR25910 FL10655
LUS26-2SSNo evaluation report listing.
LUS26-2Z ESR-2549 ESR-2523 ESR-3096 RR25910 FL10655
LUS26SSNo evaluation report listing.
LUS26Z ESR-2549 ESR-2523 ESR-3096 RR25910 FL10655
LUS28 ESR-2549 ESR-2523 ESR-3096 RR25807 RR25910 FL10655
LUS28-2 ESR-2549 ESR-2523 ESR-3096 RR25807 RR25910 FL10655
LUS28-2SSNo evaluation report listing.
LUS28-2Z ESR-2549 ESR-2523 ESR-3096 RR25910 FL10655
LUS28-3 ESR-2549 ESR-2523 FL10655
LUS28-3Z ESR-2549 ESR-2523 FL10655
LUS28SSNo evaluation report listing.
LUS28Z ESR-2549 ESR-2523 ESR-3096 RR25910 FL10655
LUS36Z ESR-2549 ESR-2523 FL10655
LUS410 ESR-2549 ESR-2523 RR25807 FL10655
LUS410Z ESR-2549 ESR-2523 FL10655
LUS414 ESR-2549 ESR-2523 RR25807 FL10655
LUS414Z ESR-2549 ESR-2523 FL10655
LUS44 ESR-2549 ESR-2523 RR25807 FL10655
LUS44Z ESR-2549 ESR-2523 FL10655
LUS46 ESR-2549 ESR-2523 RR25807 FL10655
LUS46Z ESR-2549 ESR-2523 FL10655
LUS48 ESR-2549 ESR-2523 RR25807 FL10655
LUS48Z ESR-2549 ESR-2523 FL10655

ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

Drawings

Part Orthographic Perspective
HGUSNone None
HGUS210-3None None
HGUS210-4None None
HGUS3.25/12
HGUS3.25/12 Front View
DWG DXF
HGUS3.25/12 Right View
DWG DXF
HGUS3.25/12 Top View
DWG DXF
None
HGUS46None None
HHUS210-2None None
HHUS210-3None None
HHUS210-4None None
HUSNone None
HUS210
HUS210 Front View
DWG DXF
HUS210 Right View
DWG DXF
HUS210 Top View
DWG DXF
HUS1.81/10 Installed Perspective View
DWG DXF
HUS210-2
HUS210-2 Front View
DWG DXF
HUS210-2 Left View
DWG DXF
HUS210-2 Right View
DWG DXF
HUS210-2 Top View
DWG DXF
HUS1.81/10 Installed Perspective View
DWG DXF
HUS212-2
HUS212-2 Front View
DWG DXF
HUS212-2 Right View
DWG DXF
HUS212-2 Top View
DWG DXF
HUS1.81/10 Installed Perspective View
DWG DXF
HUS26
HUS26 Front View
DWG DXF
HUS26 Left View
DWG DXF
HUS26 Right View
DWG DXF
HUS26 Top View
DWG DXF
High Wind Resistant Construction Detail D124: Combined Connector - HWRC D124 Hanger Uplift Considerations Combined Connector Example
DWG DXF
HUS1.81/10 Installed Perspective View
DWG DXF
HUS26 Installed Perspective View - Single ply with blocking
DWG DXF
HUS26-2
HUS26-2 Front View
DWG DXF
HUS26-2 Left View
DWG DXF
HUS26-2 Right View
DWG DXF
HUS26-2 Top View
DWG DXF
HUS1.81/10 Installed Perspective View
DWG DXF
HUS28
HUS28 Front View
DWG DXF
HUS28 Left View
DWG DXF
HUS28 Right View
DWG DXF
HUS28 Top View
DWG DXF
HUS1.81/10 Installed Perspective View
DWG DXF
HUS28-2
HUS28-2 Front View
DWG DXF
HUS28-2 Left View
DWG DXF
HUS28-2 Right View
DWG DXF
HUS28-2 Top View
DWG DXF
HUS1.81/10 Installed Perspective View
DWG DXF
HUS412
HUS412 Front View
DWG DXF
HUS412 Left View
DWG DXF
HUS412 Right View
DWG DXF
HUS412 Top View
DWG DXF
HUS1.81/10 Installed Perspective View
DWG DXF
HUS46
HUS46 Front View
DWG DXF
HUS46 Left View
DWG DXF
HUS46 Right View
DWG DXF
HUS46 Top View
DWG DXF
HUS1.81/10 Installed Perspective View
DWG DXF
HUS46TF
HUS46TF Front View
DWG DXF
HUS46TF Left View
DWG DXF
HUS46TF Right View
DWG DXF
HUS46TF Top View
DWG DXF
None
HUS48
HUS48 Front View
DWG DXF
HUS48 Left View
DWG DXF
HUS48 Right View
DWG DXF
HUS48 Top View
DWG DXF
HUS1.81/10 Installed Perspective View
DWG DXF
HUS48TF
HUS48TF Front View
DWG DXF
HUS48TF Left View
DWG DXF
HUS48TF Right View
DWG DXF
HUS48TF Top View
DWG DXF
None
LUSNone None
LUS210-2
LUS210-2 Front View
DWG DXF
LUS210-2 Left View
DWG DXF
LUS210-2 Right View
DWG DXF
LUS210-2 Top View
DWG DXF
None
LUS210-2Z
LUS210-2 Front View
DWG DXF
LUS210-2 Left View
DWG DXF
LUS210-2 Right View
DWG DXF
LUS210-2 Top View
DWG DXF
None
LUS210-3
LUS210-3 Front View
DWG DXF
LUS210-3 Left View
DWG DXF
LUS210-3 Right View
DWG DXF
LUS210-3 Top View
DWG DXF
None
LUS210-3Z
LUS210-3 Front View
DWG DXF
LUS210-3 Left View
DWG DXF
LUS210-3 Right View
DWG DXF
LUS210-3 Top View
DWG DXF
None
LUS210Z
LUS210 Front View
DWG DXF
LUS210 Left View
DWG DXF
LUS210 Right View
DWG DXF
LUS210 Top View
DWG DXF
High Wind Resistant Construction Detail D74: Wall to Pile/Girder - HWRC D74 Wall to PileGirder
DWG DXF
LUS24Z
LUS24 Front View
DWG DXF
LUS24 Left View
DWG DXF
LUS24 Right View
DWG DXF
LUS24 Top View
DWG DXF
None
LUS26-2Z
LUS26-2 Front View
DWG DXF
LUS26-2 Left View
DWG DXF
LUS26-2 Right View
DWG DXF
LUS26-2 Top View
DWG DXF
None
LUS26Z
LUS26 Front View
DWG DXF
LUS26 Left View
DWG DXF
LUS26 Right View
DWG DXF
LUS26 Top View
DWG DXF
None
LUS28
LUS28 Front View
DWG DXF
LUS28 Left View
DWG DXF
LUS28 Right View
DWG DXF
LUS28 Top View
DWG DXF
LUS28 Installed Perspective View
DWG DXF
LUS28 Installed Perspective View - Truss to Truss
DWG DXF
LUS28-2
LUS28-2 Front View
DWG DXF
LUS28-2 Left View
DWG DXF
LUS28-2 Right View
DWG DXF
LUS28-2 Top View
DWG DXF
None
LUS28-2Z
LUS28-2 Front View
DWG DXF
LUS28-2 Left View
DWG DXF
LUS28-2 Right View
DWG DXF
LUS28-2 Top View
DWG DXF
None
LUS28-3
LUS28-3 Front View
DWG DXF
LUS28-3 Left View
DWG DXF
LUS28-3 Right View
DWG DXF
LUS28-3 Top View
DWG DXF
None
LUS28-3Z
LUS28-3 Front View
DWG DXF
LUS28-3 Left View
DWG DXF
LUS28-3 Right View
DWG DXF
LUS28-3 Top View
DWG DXF
None
LUS28Z
LUS28 Front View
DWG DXF
LUS28 Left View
DWG DXF
LUS28 Right View
DWG DXF
LUS28 Top View
DWG DXF
LUS28 Installed Perspective View
DWG DXF
LUS28 Installed Perspective View - Truss to Truss
DWG DXF
LUS36ZNone None
LUS410
LUS410 Front View
DWG DXF
LUS410 Left View
DWG DXF
LUS410 Right View
DWG DXF
LUS410 Top View
DWG DXF
None
LUS410Z
LUS410 Front View
DWG DXF
LUS410 Left View
DWG DXF
LUS410 Right View
DWG DXF
LUS410 Top View
DWG DXF
None
LUS414
LUS414 Front View
DWG DXF
LUS414 Left View
DWG DXF
LUS414 Right View
DWG DXF
LUS414 Top View
DWG DXF
None
LUS414Z
LUS414 Front View
DWG DXF
LUS414 Left View
DWG DXF
LUS414 Right View
DWG DXF
LUS414 Top View
DWG DXF
None
LUS44
LUS44 Front View
DWG DXF
LUS44 Left View
DWG DXF
LUS44 Right View
DWG DXF
LUS44 Top View
DWG DXF
None
LUS44Z
LUS44 Front View
DWG DXF
LUS44 Left View
DWG DXF
LUS44 Right View
DWG DXF
LUS44 Top View
DWG DXF
None
LUS46
LUS46 Front View
DWG DXF
LUS46 Left View
DWG DXF
LUS46 Right View
DWG DXF
LUS46 Top View
DWG DXF
None
LUS46Z
LUS46 Front View
DWG DXF
LUS46 Left View
DWG DXF
LUS46 Right View
DWG DXF
LUS46 Top View
DWG DXF
None
LUS48
LUS48 Front View
DWG DXF
LUS48 Left View
DWG DXF
LUS48 Right View
DWG DXF
LUS48 Top View
DWG DXF
None
LUS48Z
LUS48 Front View
DWG DXF
LUS48 Left View
DWG DXF
LUS48 Right View
DWG DXF
LUS48 Top View
DWG DXF
None

Related Products