U Face-Mount Joist Hanger
On This Page
Face-Mount Hangers for Solid Sawn Lumber
This product's information may differ depending on the category of use. You are currently viewing details related to Face-Mount Hangers for Solid Sawn Lumber. You can also view product information related to the category: Face-Mount Hangers for Engineered Wood
Product Details
The U is designed for joist-to-header installation in wood-framed construction. This face-mount hanger is engineered for strength and provides easy installation. The U hanger is precision-formed and manufactured to the highest quality standards.
Key Features
- U-series hangers are tested, load rated and code compliant
- The U series installs using several fastener selections with tested allowable loads
Material
- 16 gauge
Finish
- Galvanized. Some products available in ZMAX® coating or stainless steel; see Corrosion Information.
Installation
- Use all specified fasteners; see General Notes
- Joists sloped up to 1/4:12 achieve table loads
- When nailing into carrying member's end grain, the allowable load is adjusted by a factor of 0.67
Related Literature
Product Information Table
| Model No. | Ga. | W (in.) | H (in.) | B (in.) | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|
| U14 | 16 | 1 13/16 | 10 1/4 | 2 | Zinc Galvanized, G90 | 1 |
| U2.1/4 | 16 | 2 1/8 | 3 1/2 | 2 | Zinc Galvanized, G90 | 1 |
| U210 | 16 | 1 9/16 | 7 13/16 | 2 | Zinc Galvanized, G90 | 1 |
| U210-2 | 16 | 3 1/8 | 8 1/2 | 2 | Zinc Galvanized, G90 | 1 |
| U210-3 | 16 | 4 5/8 | 7 3/4 | 2 | Zinc Galvanized, G90 | 1 |
| U210R | 16 | 2 | 9 1/8 | 2 | Zinc Galvanized, G90 | 1 |
| U210Z | 16 | 1 9/16 | 7 13/16 | 2 | ZMAX® | 1 |
| U214 | 16 | 1 9/16 | 10 | 2 | Zinc Galvanized, G90 | 1 |
| U24 | 16 | 1 9/16 | 3 1/8 | 1 1/2 | Zinc Galvanized, G90 | 1 |
| U24-2 | 16 | 3 1/8 | 3 | 2 | Zinc Galvanized, G90 | 1 |
| U24R | 16 | 2 | 3 5/8 | 2 | Zinc Galvanized, G90 | 1 |
| U26 | 16 | 1 9/16 | 4 3/4 | 2 | Zinc Galvanized, G90 | 1 |
| U26-2 | 16 | 3 1/8 | 5 | 2 | Zinc Galvanized, G90 | 1 |
| U26-3 | 16 | 4 5/8 | 4 1/4 | 2 | Zinc Galvanized, G90 | 1 |
| U26R | 16 | 2 | 5 5/8 | 2 | Zinc Galvanized, G90 | 1 |
| U310 | 16 | 2 9/16 | 8 7/8 | 2 | Zinc Galvanized, G90 | 1 |
| U314 | 16 | 2 9/16 | 10 1/2 | 2 | Zinc Galvanized, G90 | 1 |
| U34 | 16 | 2 9/16 | 3 3/8 | 2 | Zinc Galvanized, G90 | 1 |
| U3510/14 | 16 | 2 5/16 | 9 | 2 | Zinc Galvanized, G90 | 1 |
| U3510-2 | 16 | 4 3/4 | 8 3/4 | 2 | Zinc Galvanized, G90 | 1 |
| U3512-2 | 16 | 4 3/4 | 11 1/4 | 2 | Zinc Galvanized, G90 | 1 |
| U3516/20 | 16 | 2 5/16 | 10 9/16 | 2 | Zinc Galvanized, G90 | 1 |
| U36 | 16 | 2 9/16 | 5 3/8 | 2 | Zinc Galvanized, G90 | 1 |
| U410 | 16 | 3 9/16 | 8 3/8 | 2 | Zinc Galvanized, G90 | 1 |
| U410R | 16 | 4 | 8 1/8 | 2 | Zinc Galvanized, G90 | 1 |
| U414 | 16 | 3 9/16 | 10 | 2 | Zinc Galvanized, G90 | 1 |
| U44 | 16 | 3 9/16 | 2 7/8 | 2 | Zinc Galvanized, G90 | 1 |
| U44R | 16 | 4 | 2 5/8 | 2 | Zinc Galvanized, G90 | 1 |
| U46 | 16 | 3 9/16 | 4 7/8 | 2 | Zinc Galvanized, G90 | 1 |
| U46R | 16 | 4 | 4 5/8 | 2 | Zinc Galvanized, G90 | 1 |
| U610 | 16 | 5 1/2 | 8 1/2 | 2 | Zinc Galvanized, G90 | 1 |
| U610R | 16 | 6 | 8 1/2 | 2 | Zinc Galvanized, G90 | 1 |
| U66 | 16 | 5 1/2 | 5 | 2 | Zinc Galvanized, G90 | 1 |
| U66R | 16 | 6 | 5 | 2 | Zinc Galvanized, G90 | 1 |
Load Tables
See Hanger Options for hanger modifications, which may result in reduced loads.
Load Values with Nails
See Hanger Tables.
U Series Modifications and Associated Load Reduction Factors
- Modified seat is sloped, skewed, or both. If sloped only or skewed only, use a smooth-shank stainless-steel reduction of 0.65.
- Skews over 50° require a square-cut joist.
Reduction Factor Instructions
Allowable Download =
Seat x Flange x Stainless Steel Nails x Other Fastener Substitutions x (Table Load)
Allowable Uplift =
0.75 x Face Fastener Type x (Table Load) for skewed or sloped
1.00 x Face Fastener Type x (Table Load) for non-skewed or non-sloped
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
