We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

text.skipToContent text.skipToNavigation

HU Heavy Face-Mount Joist Hanger

HU

On This Page

Face-Mount Masonry Hangers

This product's information may differ depending on the category of use. You are currently viewing details related to Face-Mount Masonry Hangers. You can also view product information related to the categories of: Face-Mount Hangers for Solid Sawn Lumber, Face-Mount Hangers for Engineered Wood

The HU is designed to be installed on a masonry/concrete wall for structures requiring additional strength and safety factors. This heavy-duty, face-mount hanger is available in a variety of sizes to accommodate a wide range of joist sizes.

Key Features

  • Available with one flange concealed when the W dimension is less than 2 5/16" at 100% of the table load
  • Tested, load rated and code compliant

Material

  • 14 gauge

Finish

  • Galvanized. Some products available in ZMAX® coating; see Corrosion Information.

Installation

  • Attach the hangers to concrete or GFCMU walls using hex-head Titen Turbo screws. Titen Turbo screw anchors for GFCMU (1/4" x 2 3/4" — Model TNT25234H) and for concrete (1/4" x 1 3/4" — Model TNT25134H) are not provided with the hangers.
  • Drill and prep the holes according to the Installation Instructions provided with the packaging for Titen Turbo screw anchors.
  • Caution: Oversized-diameter holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor’s load capacity.
  • Titen Turbo Installation Kits are available (Model TNTINSTALLKIT). A 3/16" x 6" SDS-plus drill bit is also available (Model MDPL01860SH).
  • Installation on GFCMU — A minimum edge distance of 1 1/2" and a minimum end distance of 3 7/8" is required as shown in Figure 1 for full load. Where no uplift is required, a minimum end distance of 1 1/2" is permitted.
  • Installation on Concrete — A minimum end and edge distance of 3" is required for table loads. For edge distances of 1 3/4" minimum and a minimum end distance of 3", allowable download is 0.90 of table loads with no reduction for uplift loads.

Options

  • For both flanges concealed, order HUC
  • See table-modifications table for available options and associated load capacities for HU hangers
  • For ease of ordering, refer to technical bulletin U/HU Hangers (T-C-U-HU-WS)

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Ga. W (in.) H (in.) B (in.) Coating/Material Packaging Qty.
HU1.81/5 14 1 13/16 5 3/8 2 1/2 Zinc Galvanized, G90 1
HU11 14 1 13/16 11 1/16 2 1/2 Zinc Galvanized, G90 1
HU14 14 1 13/16 13 11/16 2 1/2 Zinc Galvanized, G90 1
HU2.1/11 14 2 1/8 11 2 1/2 Zinc Galvanized, G90 1
HU2.1/9 14 2 1/8 9 3/16 2 1/2 Zinc Galvanized, G90 1
HU2.75/10 14 2 3/4 9 2 1/2 Zinc Galvanized, G90 1
HU2.75/12 14 2 3/4 10 3/4 2 1/2 Zinc Galvanized, G90 1
HU2.75/14 14 2 3/4 13 2 1/2 Zinc Galvanized, G90 1
HU210 14 1 9/16 7 1/8 2 1/4 Zinc Galvanized, G90 1
HU210-2 14 3 1/8 8 5/8 2 1/2 Zinc Galvanized, G90 1
HU210-3 14 4 11/16 8 1/16 2 1/2 Zinc Galvanized, G90 1
HU210-3Z 14 4 11/16 8 1/16 2 1/2 ZMAX® 1
HU210-4 14 6 1/8 8 3/8 2 1/2 Zinc Galvanized, G90 1
HU210Z 14 1 9/16 7 1/8 2 1/4 ZMAX® 1
HU212 14 1 9/16 9 2 1/4 Zinc Galvanized, G90 1
HU212-2 14 3 1/8 10 9/16 2 1/2 Zinc Galvanized, G90 1
HU212-3 14 4 11/16 9 13/16 2 1/2 Zinc Galvanized, G90 1
HU214 14 1 9/16 10 1/8 2 1/4 Zinc Galvanized, G90 1
HU214-2 14 3 1/8 12 1/8 2 1/2 Zinc Galvanized, G90 1
HU214-3 14 4 11/16 12 1/16 2 1/2 Zinc Galvanized, G90 1
HU216 14 1 9/16 12 15/16 2 1/4 Zinc Galvanized, G90 1
HU216-2 14 3 1/8 13 7/8 2 1/2 Zinc Galvanized, G90 1
HU216-3 14 4 11/16 13 7/8 2 1/2 Zinc Galvanized, G90 1
HU24-2 14 3 1/8 3 1/16 2 1/2 Zinc Galvanized, G90 1
HU26 14 1 9/16 3 1/16 2 1/4 Zinc Galvanized, G90 1
HU26-2 14 3 1/8 4 15/16 2 1/2 Zinc Galvanized, G90 1
HU26-3 14 4 11/16 4 5/8 2 1/2 Zinc Galvanized, G90 1
HU28 14 1 9/16 5 1/4 2 1/4 Zinc Galvanized, G90 1
HU28-2 14 3 1/8 6 5/16 2 1/2 Zinc Galvanized, G90 1
HU28-4 14 6 1/8 7 2 1/2 Zinc Galvanized, G90 1
HU3.25/10.5 14 3 1/4 10 1/4 2 1/2 Zinc Galvanized, G90 1
HU3.25/12 14 3 1/4 11 3/4 2 1/2 Zinc Galvanized, G90 1
HU3.25/16 14 3 1/4 13 13/16 2 1/2 Zinc Galvanized, G90 1
HU310 14 2 9/16 8 7/8 2 1/2 Zinc Galvanized, G90 1
HU310-2 14 5 1/8 7 13/16 2 1/2 Zinc Galvanized, G90 1
HU312 14 2 9/16 10 7/8 2 1/2 Zinc Galvanized, G90 1
HU312-2 14 5 1/8 10 5/8 2 1/2 Zinc Galvanized, G90 1
HU314 14 2 9/16 12 7/16 2 1/2 Zinc Galvanized, G90 1
HU314-2 14 5 1/8 12 5/8 2 1/2 Zinc Galvanized, G90 1
HU316 14 2 9/16 14 5/13 2 1/2 Zinc Galvanized, G90 1
HU34 14 2 9/16 3 3/8 2 1/2 Zinc Galvanized, G90 1
HU3511 14 2 3/8 10 15/16 2 1/2 Zinc Galvanized, G90 1
HU3514 14 2 3/8 12 1/2 2 1/2 Zinc Galvanized, G90 1
HU3514-2 14 4 3/4 13 1/4 2 1/2 Zinc Galvanized, G90 1
HU3516/22 14 2 3/8 14 1/4 2 1/2 Zinc Galvanized, G90 1
HU3516-2 14 4 3/4 15 1/4 2 1/2 Zinc Galvanized, G90 1
HU3520-2 14 4 3/4 19 1/4 2 1/2 Zinc Galvanized, G90 1
HU3524/30 14 2 3/8 18 2 1/2 Zinc Galvanized, G90 1
HU359 14 2 3/8 9 2 1/2 Zinc Galvanized, G90 1
HU36 14 2 9/16 5 1/4 2 1/2 Zinc Galvanized, G90 1
HU36-2 14 5 1/8 4 3/4 2 1/2 Zinc Galvanized, G90 1
HU38 14 2 9/16 5 5/8 2 1/2 Zinc Galvanized, G90 1
HU38-2 14 5 1/8 5 13/16 2 1/2 Zinc Galvanized, G90 1
HU4.12/11 14 4 1/8 10 5/16 2 1/2 Zinc Galvanized, G90 1
HU4.12/9 14 4 1/8 8 5/8 2 1/2 Zinc Galvanized, G90 1
HU4.28/11 14 4 9/32 11 2 1/2 Zinc Galvanized, G90 1
HU4.28/9 14 4 9/32 9 2 1/2 Zinc Galvanized, G90 1
HU4.75/11 14 4 3/4 11 2 1/2 Zinc Galvanized, G90 1
HU4.75/9 14 4 3/4 9 2 1/2 Zinc Galvanized, G90 1
HU410 14 3 9/16 8 3/8 2 1/2 Zinc Galvanized, G90 1
HU410-2 14 7 1/8 8 9/16 2 1/2 Zinc Galvanized, G90 1
HU410SS 14 3 9/16 8 3/8 2 1/2 Stainless Steel 1
HU410Z 14 3 9/16 8 3/8 2 1/2 ZMAX® 1
HU412 14 3 9/16 10 3/8 2 1/2 Zinc Galvanized, G90 1
HU412-2 14 7 1/8 10 13/16 2 1/2 Zinc Galvanized, G90 1
HU412Z 14 3 9/16 10 3/8 2 1/2 ZMAX® 1
HU414 14 3 9/16 11 15/16 2 1/2 Zinc Galvanized, G90 1
HU414-2 14 7 1/8 12 9/16 2 1/2 Zinc Galvanized, G90 1
HU416 14 3 9/16 13 11/16 2 1/2 Zinc Galvanized, G90 1
HU44 14 3 9/16 2 7/8 2 1/2 Zinc Galvanized, G90 1
HU46 14 3 9/16 4 3/4 2 1/2 Zinc Galvanized, G90 1
HU46SS 14 3 9/16 4 3/4 2 1/2 Stainless Steel 1
HU46Z 14 3 9/16 4 3/4 2 1/2 ZMAX® 1
HU48 14 3 9/16 6 1/8 2 1/2 Zinc Galvanized, G90 1
HU48SS 14 3 9/16 6 1/8 2 1/2 Stainless Steel 1
HU48Z 14 3 9/16 6 1/8 2 1/2 ZMAX® 1
HU5.125/12 14 5 1/4 10 1/4 2 1/2 Zinc Galvanized, G90 1
HU5.125/13.5 14 5 1/4 13 1/4 2 1/2 Zinc Galvanized, G90 1
HU5.125/16 14 5 1/4 13 7/8 2 1/2 Zinc Galvanized, G90 1
HU5.31/11 14 5 5/16 9 7/16 2 1/2 Zinc Galvanized, G90 1
HU5.31/14 14 5 5/16 11 11/16 2 1/2 Zinc Galvanized, G90 1
HU5.31/9 14 5 5/16 7 3/4 2 1/2 Zinc Galvanized, G90 1
HU610 14 5 1/2 7 5/8 2 1/2 Zinc Galvanized, G90 1
HU610Z 14 5 1/2 7 5/8 2 1/2 ZMAX® 1
HU612 14 5 1/2 9 3/8 2 1/2 Zinc Galvanized, G90 1
HU612Z 14 5 1/2 9 3/8 2 1/2 ZMAX® 1
HU614 14 5 1/2 11 5/8 2 1/2 Zinc Galvanized, G90 1
HU616 14 5 1/2 13 3/8 2 1/2 Zinc Galvanized, G90 1
HU66 14 5 1/2 4 3/16 2 1/2 Zinc Galvanized, G90 1
HU68 14 5 1/2 5 13/16 2 1/2 Zinc Galvanized, G90 1
HU68Z 14 5 1/2 5 13/16 2 1/2 ZMAX® 1
HU7 14 1 13/16 6 11/16 2 1/2 Zinc Galvanized, G90 1
HU810 14 7 1/2 8 3/8 2 1/2 Zinc Galvanized, G90 1
HU812 14 7 1/2 10 1/8 2 1/2 Zinc Galvanized, G90 1
HU814 14 7 1/2 11 7/8 2 1/2 Zinc Galvanized, G90 1
HU816 14 7 1/2 13 5/8 2 1/2 Zinc Galvanized, G90 1
HU88 14 7 1/2 6 5/8 2 1/2 Zinc Galvanized, G90 1
HU9 14 1 13/16 9 5/16 2 1/2 Zinc Galvanized, G90 1

Load Tables

    These products are available with additional corrosion protection.

HU/HUC/HSUR/L Medium-Duty Face-Mount Hangers Load Table

HU/HUC/HSUR/L Medium-Duty Face-Mount Hangers Load Table
  1. Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern.
  2. Concrete shall have a minimum compressive strength of f'c = 2,500 psi.
  3. Grout-filled CMU (GFCMU) shall have a minimum compressive strength of f'm = 1,500 psi.
  4. Products shall be installed such that Titen Turbo screws are not exposed to the weather.
  5. Fasteners: Nail dimensions in the table are diameter by length. Titen Turbo screws are Simpson Strong-Tie concrete and masonry screws (hex-head model required). For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT