We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

HU Heavy Face-Mount Joist Hanger

HU

On This Page

Face-Mount Masonry Hangers

This product's information may differ depending on the category of use. You are currently viewing details related to Face-Mount Masonry Hangers. You can also view product information related to the categories of: Face-Mount Hangers for Solid Sawn Lumber, Face-Mount Hangers for Engineered Wood

The HU is designed to be installed on a masonry/concrete wall for structures requiring additional strength and safety factors. This heavy-duty, face-mount hanger is available in a variety of sizes to accommodate a wide range of joist sizes.

Key Features

  • Available with one flange concealed when the W dimension is less than 2 5/16" at 100% of the table load
  • Tested, load rated and code compliant

Material

  • 14 gauge

Finish

  • Galvanized. Some products available in ZMAX® coating; see Corrosion Information.

Installation

  • Attach the hangers to concrete or GFCMU walls using hex-head Titen Turbo screws. Titen Turbo screw anchors for GFCMU (1/4" x 2 3/4" — Model TNT25234H) and for concrete (1/4" x 1 3/4" — Model TNT25134H) are not provided with the hangers.
  • Drill and prep the holes according to the Installation Instructions provided with the packaging for Titen Turbo screw anchors.
  • Caution: Oversized-diameter holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor’s load capacity.
  • Titen Turbo Installation Kits are available (Model TNTINSTALLKIT). A 3/16" x 6" SDS-plus drill bit is also available (Model MDPL01860SH).
  • Installation on GFCMU — A minimum edge distance of 1 1/2" and a minimum end distance of 3 7/8" is required as shown in figure 1 for full table loads. For HU models installed with a 5/8" minimum face fastener edge distance, allowable download is 0.63 of table loads with no reduction for uplift loads.
  • Installation on concrete — A minimum end and edge distance of 3" is required for full table loads. For edge distances of 1 3/4" minimum and a minimum end distance of 3", the allowable download is 0.90 of table loads with no reduction for uplift loads. For HU models installed with a 5/8" minimum face fastener edge distance, allowable download is 0.63 of table loads with no reduction for uplift loads.

Options

  • For both flanges concealed, order HUC
  • See table-modifications table for available options and associated load capacities for HU hangers
  • For ease of ordering, refer to technical bulletin U/HU Hangers (T-C-U-HU-WS)

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Ga. W (in.) H (in.) B (in.) Coating/Material Packaging Qty.
HU1.81/5 14 1 13/16 5 3/8 2 1/2 Zinc Galvanized, G90 1
HU11 14 1 13/16 11 1/16 2 1/2 Zinc Galvanized, G90 1
HU14 14 1 13/16 13 11/16 2 1/2 Zinc Galvanized, G90 1
HU2.1/11 14 2 1/8 11 2 1/2 Zinc Galvanized, G90 1
HU2.1/9 14 2 1/8 9 3/16 2 1/2 Zinc Galvanized, G90 1
HU2.75/10 14 2 3/4 9 2 1/2 Zinc Galvanized, G90 1
HU2.75/12 14 2 3/4 10 3/4 2 1/2 Zinc Galvanized, G90 1
HU2.75/14 14 2 3/4 13 2 1/2 Zinc Galvanized, G90 1
HU210 14 1 9/16 7 1/8 2 1/4 Zinc Galvanized, G90 1
HU210-2 14 3 1/8 8 5/8 2 1/2 Zinc Galvanized, G90 1
HU210-3 14 4 11/16 8 1/16 2 1/2 Zinc Galvanized, G90 1
HU210-3Z 14 4 11/16 8 1/16 2 1/2 ZMAX® 1
HU210-4 14 6 1/8 8 3/8 2 1/2 Zinc Galvanized, G90 1
HU210Z 14 1 9/16 7 1/8 2 1/4 ZMAX® 1
HU212 14 1 9/16 9 2 1/4 Zinc Galvanized, G90 1
HU212-2 14 3 1/8 10 9/16 2 1/2 Zinc Galvanized, G90 1
HU212-3 14 4 11/16 9 13/16 2 1/2 Zinc Galvanized, G90 1
HU214 14 1 9/16 10 1/8 2 1/4 Zinc Galvanized, G90 1
HU214-2 14 3 1/8 12 1/8 2 1/2 Zinc Galvanized, G90 1
HU214-3 14 4 11/16 12 1/16 2 1/2 Zinc Galvanized, G90 1
HU216 14 1 9/16 12 15/16 2 1/4 Zinc Galvanized, G90 1
HU216-2 14 3 1/8 13 7/8 2 1/2 Zinc Galvanized, G90 1
HU216-3 14 4 11/16 13 7/8 2 1/2 Zinc Galvanized, G90 1
HU24-2 14 3 1/8 3 1/16 2 1/2 Zinc Galvanized, G90 1
HU26 14 1 9/16 3 1/16 2 1/4 Zinc Galvanized, G90 1
HU26-2 14 3 1/8 4 15/16 2 1/2 Zinc Galvanized, G90 1
HU26-3 14 4 11/16 4 5/8 2 1/2 Zinc Galvanized, G90 1
HU28 14 1 9/16 5 1/4 2 1/4 Zinc Galvanized, G90 1
HU28-2 14 3 1/8 6 5/16 2 1/2 Zinc Galvanized, G90 1
HU28-4 14 6 1/8 7 2 1/2 Zinc Galvanized, G90 1
HU3.25/10.5 14 3 1/4 10 1/4 2 1/2 Zinc Galvanized, G90 1
HU3.25/12 14 3 1/4 11 3/4 2 1/2 Zinc Galvanized, G90 1
HU3.25/16 14 3 1/4 13 13/16 2 1/2 Zinc Galvanized, G90 1
HU310 14 2 9/16 8 7/8 2 1/2 Zinc Galvanized, G90 1
HU310-2 14 5 1/8 7 13/16 2 1/2 Zinc Galvanized, G90 1
HU312 14 2 9/16 10 7/8 2 1/2 Zinc Galvanized, G90 1
HU312-2 14 5 1/8 10 5/8 2 1/2 Zinc Galvanized, G90 1
HU314 14 2 9/16 12 7/16 2 1/2 Zinc Galvanized, G90 1
HU314-2 14 5 1/8 12 5/8 2 1/2 Zinc Galvanized, G90 1
HU316 14 2 9/16 14 5/13 2 1/2 Zinc Galvanized, G90 1
HU34 14 2 9/16 3 3/8 2 1/2 Zinc Galvanized, G90 1
HU3511 14 2 3/8 10 15/16 2 1/2 Zinc Galvanized, G90 1
HU3514 14 2 3/8 12 1/2 2 1/2 Zinc Galvanized, G90 1
HU3514-2 14 4 3/4 13 1/4 2 1/2 Zinc Galvanized, G90 1
HU3516/22 14 2 3/8 14 1/4 2 1/2 Zinc Galvanized, G90 1
HU3516-2 14 4 3/4 15 1/4 2 1/2 Zinc Galvanized, G90 1
HU3520-2 14 4 3/4 19 1/4 2 1/2 Zinc Galvanized, G90 1
HU3524/30 14 2 3/8 18 2 1/2 Zinc Galvanized, G90 1
HU359 14 2 3/8 9 2 1/2 Zinc Galvanized, G90 1
HU36 14 2 9/16 5 1/4 2 1/2 Zinc Galvanized, G90 1
HU36-2 14 5 1/8 4 3/4 2 1/2 Zinc Galvanized, G90 1
HU38 14 2 9/16 5 5/8 2 1/2 Zinc Galvanized, G90 1
HU38-2 14 5 1/8 5 13/16 2 1/2 Zinc Galvanized, G90 1
HU4.12/11 14 4 1/8 10 5/16 2 1/2 Zinc Galvanized, G90 1
HU4.12/9 14 4 1/8 8 5/8 2 1/2 Zinc Galvanized, G90 1
HU4.28/11 14 4 9/32 11 2 1/2 Zinc Galvanized, G90 1
HU4.28/9 14 4 9/32 9 2 1/2 Zinc Galvanized, G90 1
HU4.75/11 14 4 3/4 11 2 1/2 Zinc Galvanized, G90 1
HU4.75/9 14 4 3/4 9 2 1/2 Zinc Galvanized, G90 1
HU410 14 3 9/16 8 3/8 2 1/2 Zinc Galvanized, G90 1
HU410-2 14 7 1/8 8 9/16 2 1/2 Zinc Galvanized, G90 1
HU410SS 14 3 9/16 8 3/8 2 1/2 Stainless Steel 1
HU410Z 14 3 9/16 8 3/8 2 1/2 ZMAX® 1
HU412 14 3 9/16 10 3/8 2 1/2 Zinc Galvanized, G90 1
HU412-2 14 7 1/8 10 13/16 2 1/2 Zinc Galvanized, G90 1
HU412Z 14 3 9/16 10 3/8 2 1/2 ZMAX® 1
HU414 14 3 9/16 11 15/16 2 1/2 Zinc Galvanized, G90 1
HU414-2 14 7 1/8 12 9/16 2 1/2 Zinc Galvanized, G90 1
HU416 14 3 9/16 13 11/16 2 1/2 Zinc Galvanized, G90 1
HU44 14 3 9/16 2 7/8 2 1/2 Zinc Galvanized, G90 1
HU46 14 3 9/16 4 3/4 2 1/2 Zinc Galvanized, G90 1
HU46SS 14 3 9/16 4 3/4 2 1/2 Stainless Steel 1
HU46Z 14 3 9/16 4 3/4 2 1/2 ZMAX® 1
HU48 14 3 9/16 6 1/8 2 1/2 Zinc Galvanized, G90 1
HU48SS 14 3 9/16 6 1/8 2 1/2 Stainless Steel 1
HU48Z 14 3 9/16 6 1/8 2 1/2 ZMAX® 1
HU5.125/12 14 5 1/4 10 1/4 2 1/2 Zinc Galvanized, G90 1
HU5.125/13.5 14 5 1/4 13 1/4 2 1/2 Zinc Galvanized, G90 1
HU5.125/16 14 5 1/4 13 7/8 2 1/2 Zinc Galvanized, G90 1
HU610 14 5 1/2 7 5/8 2 1/2 Zinc Galvanized, G90 1
HU610Z 14 5 1/2 7 5/8 2 1/2 ZMAX® 1
HU612 14 5 1/2 9 3/8 2 1/2 Zinc Galvanized, G90 1
HU612Z 14 5 1/2 9 3/8 2 1/2 ZMAX® 1
HU614 14 5 1/2 11 5/8 2 1/2 Zinc Galvanized, G90 1
HU616 14 5 1/2 13 3/8 2 1/2 Zinc Galvanized, G90 1
HU66 14 5 1/2 4 3/16 2 1/2 Zinc Galvanized, G90 1
HU68 14 5 1/2 5 13/16 2 1/2 Zinc Galvanized, G90 1
HU68Z 14 5 1/2 5 13/16 2 1/2 ZMAX® 1
HU7 14 1 13/16 6 11/16 2 1/2 Zinc Galvanized, G90 1
HU810 14 7 1/2 8 3/8 2 1/2 Zinc Galvanized, G90 1
HU812 14 7 1/2 10 1/8 2 1/2 Zinc Galvanized, G90 1
HU814 14 7 1/2 11 7/8 2 1/2 Zinc Galvanized, G90 1
HU816 14 7 1/2 13 5/8 2 1/2 Zinc Galvanized, G90 1
HU88 14 7 1/2 6 5/8 2 1/2 Zinc Galvanized, G90 1
HU9 14 1 13/16 9 5/16 2 1/2 Zinc Galvanized, G90 1

Load Tables

    These products are available with additional corrosion protection.

HU/HUC/HSUR/L Medium-Duty Face-Mount Hangers Load Table

HU/HUC/HSUR/L Medium-Duty Face-Mount Hangers Load Table
  1. Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern.
  2. Concrete shall have a minimum compressive strength of f'c = 2,500 psi.
  3. Grout-filled CMU (GFCMU) shall have a minimum compressive strength of f'm = 1,500 psi.
  4. Products shall be installed such that Titen Turbo screws are not exposed to the weather.
  5. Fasteners: Nail dimensions in the table are diameter by length. Titen Turbo screws are Simpson Strong-Tie concrete and masonry screws (hex-head model required). For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT