PGT® Pipe Grip Tie®
On This Page
Product Details
The PGT is a tie designed for attaching wood fence rails to metal fence posts. This pipe grip tie can be used in new construction or to replace damaged wooden posts. Ideal for a variety of conditions, the PGT helps to eliminate the rot and failures to which wood fence posts are most prone, thus extending the life of a fence.
Key Features
- A solid connection with quick and easy installation
- Ideal for replacing damaged wood posts or for new fence construction
- Galvanized steel construction for durability and corrosion resistance
Applications
- PGT1.5Z-R is for 1 1/2" pipe (1 7/8" outside diameter)
- PGT2-R and PGT2Z-R are for 2" pipe (2 3/8" outside diameter)
- PGT2A is for 2" pipe (2 3/8" outside diameter)
- PGT2E is for 2" pipes (2 3/8" outside diameter) and features a two-piece design that provides a solid connection between fence stringer and post
Product Includes
- PGT1.5Z-R, PGT2A, PGT2Z-R and PGT2-R include 1 bolt
- PGT2E-R50 is sold as full carton with (50) attachment plates, (50) front straps and (55) 1/4" diameter x 3/4"-long hex-head bolts
Material
- PGT2A— 14 gauge; all others 12 gauge
Finish
- PGTA, PGT2-R, PGT2E — galvanized; PGT1.5Z, PGT2Z-R — ZMAX®
Installation
- Use all specified fasteners; see General Notes.
- Install on vertical pipes, offsetting corners to allow for the correct rail alignment.
- Use three to four PGTs per pipe; line up to stringline.
- Tighten PGT with one 1/4" hex-head bolt (supplied).
- Attach PGT to rails using four 1/4" x 1 1/2" Strong-Drive® SDS Heavy-Duty Connector screws (not supplied). 1/4" lag screws may be substituted. Follow the code requirements for predrilling.
- Field bend PGT flanges to fit corner and angled conditions (bend one time only).
- PGTSCREW-R10 is a pack of (10) 1/4" x 2 1/2" replacement hex-head screw bolts for the PGT2A, PGT2-R, PGT2Z-R and PGT1.52Z-R.
Patent Information
- US Patent 8,596,618
Related Literature
Product Information Table
| Model No. | Pipe Diameter | Ga. | W (in.) | H (in.) | Coating/Material | Installs With | Product Includes | Packaging Qty. |
|---|---|---|---|---|---|---|---|---|
| PGT1.5Z-R | 1-7/8 in. outside pipe diameter | 12 | 6 1/2 | 1 1/2 | ZMAX® | PGT1.5Z attaches to rails with (4) 1/4 in. x 1-1/2 in. HDG Simpson Strong-Tie® Strong-Drive® SDS Heavy-Duty Connector screws (not included) | (1) bolt supplied | 1 |
| PGT2A | 2-3/8 in. outside pipe diameter | 14 | 6 5/8 | 1 1/4 | Zinc Galvanized, G90 | PGT2A attaches to rails with (4) 1/4 in. x 1-1/2 in. Simpson Strong-Tie® Strong-Drive® SDS Heavy-Duty Connector screws (not included) | (1) bolt supplied | 1 |
| PGT2E-R50 | 2-3/8 in. outside pipe diameter | 12 | 7 1/4 | 2 | Zinc Galvanized, G90 | PGT2E attaches to rails with (4) 1/4 in. x 1-1/2 in. Simpson Strong-Tie® Strong-Drive® SDS Heavy-Duty Connector screws or 1/4-in. lag screws (follow code requirements for predrilling) | Sold as full carton with (50) attachment plates, (50) front straps and (55) 1/4-in. diameter x 3/4-in. long hex-head bolts | 50 |
| PGT2-R | 2-3/8 in. outside pipe diameter | 12 | 6 1/2 | 1 1/2 | Zinc Galvanized, G90 | PGT2 attaches to rails with (4) 1/4 in. x 1-1/2 in. Simpson Strong-Tie® Strong-Drive® SDS Heavy-Duty Connector screws (not included) | (1) bolt supplied | 1 |
| PGT2Z-R | 2-3/8 in. outside pipe diameter | 12 | 6 1/2 | 1 1/2 | ZMAX® | PGT2Z attaches to rails with (4) 1/4 in. x 1-1/2 in. Simpson Strong-Tie® Strong-Drive® SDS Heavy-Duty Connector screws (not included) | (1) bolt supplied | 1 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
