This product's information may differ depending on the category of use. You are currently viewing details related to Fire Wall Hangers for Engineered Wood. You can also view product information related to the categories of: Fire Wall Hangers for Plated Truss, Fire Wall Hangers for Solid Sawn Lumber, Fire Wall Hangers for Glulam Beams
The new DG fire wall hangers easily install on a two-hour wood stud fire wall (e.g. Type III construction) during framing. These top-flange hangers feature space to allow two layers of 5/8" gypsum wall board (drywall) to be slipped into place after the framing is complete. The DG/DGH/DGB fire-rated wall hangers have been tested according to ASTM E814 and received F (Flame) and T (temperature) ratings for use on one or both sides of the wall in Intertek Design No. SST/WPCF 120-01. This rating verifies that the DG/DGH/DGB hangers do not reduce the two-hour, fire wall assembly rating. The rating applies to both 2x4 and 2x6 walls.
All models of the DGH hanger may be ordered with a skew angle of up to 45° or with the top flange offset left or right.
|Top||Face||Joist||Uplift (160)||Download (100/125)||Uplift (160)||Download (100/125)|
|DG||12||7 1/4 to 11 1/4||(6) 10d||-||(6) 10d x 1 1/2"||315||1,535||245||1,395|
|DG||12||11 7/8 to 24||(6) 10d||-||(6) 10d x 1 1/2"||315||1,680||245||1,525|
|DGH||10||9 1/2 to 24||(5) 10d||(2) 10d||(8) 10d x 1 1/2"||900||2,305||615||1,910|
|7||9 1/2 to 24||(8) 10d||(4) 10d||(8) 10d||975||3,015||740||2,280|
|Model||Ga.||Fasteners||DF/SP Allowable Loads||SPF/HF Allowable Loads|
|Top||Face||Joist||Uplift (160)||Download (100/115/125)||Uplift (160)||Download (100/115/125)|
|DGH (skewed)||10||(5) 10d||(2) 10d||(8) 10d x 1 1/2"||315||1,620||245||1,350|
|DGH (offset)||10||(5) 10d||(2) 10d 4||(8) 10d x 1 1/2"||870||2,010||755||1,705|