text.skipToContent text.skipToNavigation

DG/DGH/DGB Fire Wall Hangers

DG/DGH/DGB

Fire Wall Hangers for Plated Truss

This product's information may differ depending on the category of use. You are currently viewing details related to Fire Wall Hangers for Plated Truss. You can also view product information related to the categories of: Fire Wall Hangers for Solid Sawn Lumber, Fire Wall Hangers for Engineered Wood, Fire Wall Hangers for Glulam Beams

The new DG fire wall hangers easily install on a two-hour wood stud fire wall (e.g. Type III construction) during framing. These top-flange hangers feature space to allow two layers of 5/8" gypsum wall board (drywall) to be slipped into place after the framing is complete. The DG/DGH/DGB fire-rated wall hangers have been tested according to ASTM E814 and received F (Flame) and T (temperature) ratings for use on one or both sides of the wall. This rating verifies that the DG/DGH/DGB hangers do not reduce the two-hour, fire wall assembly rating. The rating applies to both 2x4 and 2x6 walls.

Material

  • DG — 12 ga.; DGH — 10 ga.; DGB — 7 ga.

Finish

  • DG — G90; DGH and DGB Simpson Strong-Tie gray paint

Related Literature

Load Tables

Model Ga. Depth Fasteners DF/SP SPF/HF
Top Face Joist Uplift (160) Download (100/125) Uplift (160) Download (100/125)
DG 12 7 1/4 to 11 1/4 (6) 10d - (6) 10d x 1 1/2 315 1,535 245 1,395
DG 12 11 7/8 to 24 (6) 10d - (6) 10d x 1 1/2 315 1,680 245 1,525
DGH 10 9 1/2 to 24 (5) 10d (2) 10d (8) 10d x 1 1/2 900 2,305 615 1,910
DGB
(over stud)
7 9 1/2 to 24 (8) 10d (4) 10d (8) 10d 975 3,015 740 2,280
  1. Uplift loads have been increased for wind or seismic loading with no further increase allowed. Reduce where other loads govern.
  2. Allowable loads are for 2x4 minimum stud wall. Back-to-back installations require a minimum 2x6 wall. Wall design by Designer.
  3. Loads are based on a joist spacing of 16" o.c. or greater. Allowable loads for joists spaced less than 16" o.c. shall be reduced proportionally.
  4. DGB installation requires a minimum (2) 2x4 stud or post in the wall at hanger location. Post design by Designer.
  5. Nails: 10d = 0.148" dia. x 3" long, 10d x 1 1/2" = 0.148" dia. x 1 1/2" long.

Drawings

Part Orthographic Perspective
DG
DGX1: DG210, DG212, DG28 bottom view
DWG DXF
DGX2: DG2.56/9.25, DG3.62/11.25, DG3.62/9.25 bottom view
DWG DXF
DGX3: DG1.81/9.5, DG2.1/9.5, DG2.37/9.5, DG2.56/9.5, DG3.62/9.5 bottom view
DWG DXF
DGX4: DG1.81/11.88, DG1.81/14, DG1.81/16, DG2.1/11.88, DG2.1/14, DG2.1/16, DG2.37/11.88, DG2.37/14, DG2.37/16, DG2.37/18, DG2.37/20, DG2.56/11.25, DG2.56/11.88, DG2.56/14, DG2.56/16, DG2.56/18, DG2.56/20, DG2.56/22, DG2.56/24, DG3.62/11.88, DG3.62/14, DG3
DWG
DGX1: DG210, DG212, DG28 front view
DWG DXF
DGX2: DG2.56/9.25, DG3.62/11.25, DG3.62/9.25 front view
DWG DXF
DGX3: DG1.81/9.5, DG2.1/9.5, DG2.37/9.5, DG2.56/9.5, DG3.62/9.5 front view
DWG DXF
DGX4: DG1.81/11.88, DG1.81/14, DG1.81/16, DG2.1/11.88, DG2.1/14, DG2.1/16, DG2.37/11.88, DG2.37/14, DG2.37/16, DG2.37/18, DG2.37/20, DG2.56/11.25, DG2.56/11.88, DG2.56/14, DG2.56/16, DG2.56/18, DG2.56/20, DG2.56/22, DG2.56/24, DG3.62/11.88, DG3.62/14, DG3
DWG
DGX1: DG210, DG212, DG28 left view
DWG DXF
DGX2: DG2.56/9.25, DG3.62/11.25, DG3.62/9.25 left view
DWG DXF
DGX3: DG1.81/9.5, DG2.1/9.5, DG2.37/9.5, DG2.56/9.5, DG3.62/9.5 left view
DWG DXF
DGX4: DG1.81/11.88, DG1.81/14, DG1.81/16, DG2.1/11.88, DG2.1/14, DG2.1/16, DG2.37/11.88, DG2.37/14, DG2.37/16, DG2.37/18, DG2.37/20, DG2.56/11.25, DG2.56/11.88, DG2.56/14, DG2.56/16, DG2.56/18, DG2.56/20, DG2.56/22, DG2.56/24, DG3.62/11.88, DG3.62/14, DG3
DWG
DGX1: DG210, DG212, DG28 right view
DWG DXF
DGX2: DG2.56/9.25, DG3.62/11.25, DG3.62/9.25 right view
DWG DXF
DGX3: DG1.81/9.5, DG2.1/9.5, DG2.37/9.5, DG2.56/9.5, DG3.62/9.5 right view
DWG DXF
DGX4: DG1.81/11.88, DG1.81/14, DG1.81/16, DG2.1/11.88, DG2.1/14, DG2.1/16, DG2.37/11.88, DG2.37/14, DG2.37/16, DG2.37/18, DG2.37/20, DG2.56/11.25, DG2.56/11.88, DG2.56/14, DG2.56/16, DG2.56/18, DG2.56/20, DG2.56/22, DG2.56/24, DG3.62/11.88, DG3.62/14, DG3
DWG
DGX1: DG210, DG212, DG28 top view
DWG DXF
DGX2: DG2.56/9.25, DG3.62/11.25, DG3.62/9.258 top view
DWG DXF
DGX3: DG1.81/9.5, DG2.1/9.5, DG2.37/9.5, DG2.56/9.5, DG3.62/9.5 top view
DWG DXF
DGX4: DG1.81/11.88, DG1.81/14, DG1.81/16, DG2.1/11.88, DG2.1/14, DG2.1/16, DG2.37/11.88, DG2.37/14, DG2.37/16, DG2.37/18, DG2.37/20, DG2.56/11.25, DG2.56/11.88, DG2.56/14, DG2.56/16, DG2.56/18, DG2.56/20, DG2.56/22, DG2.56/24, DG3.62/11.88, DG3.62/14, DG3
DWG
DGX1: DG210, DG212, DG28
DWG DXF
DGX2: DG2.56/9.25, DG3.62/11.25, DG3.62/9.258
DWG DXF
DGX3: DG1.81/9.5, DG2.1/9.5, DG2.37/9.5, DG2.56/9.5, DG3.62/9.5
DWG DXF
DGX4: DG1.81/11.88, DG1.81/14, DG1.81/16, DG2.1/11.88, DG2.1/14, DG2.1/16, DG2.37/11.88, DG2.37/14, DG2.37/16, DG2.37/18, DG2.37/20, DG2.56/11.25, DG2.56/11.88, DG2.56/14, DG2.56/16, DG2.56/18, DG2.56/20, DG2.56/22, DG2.56/24, DG3.62/11.88, DG3.62/14, DG3
DWG
DGB
DGB bottom view
DWG DXF
DGB front view
DWG DXF
DGB left view
DWG DXF
DGB right view
DWG DXF
DGB top view
DWG DXF
None
DGH
DGH bottom view
DWG DXF
DGH front view
DWG DXF
DGH left view
DWG DXF
DGH right view
DWG DXF
DGH top view
DWG DXF
None