We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

text.skipToContent text.skipToNavigation

DGHF Fire Wall Hanger

DGHF

On This Page

Fire Wall Hangers for Plated Truss

This product's information may differ depending on the category of use. You are currently viewing details related to Fire Wall Hangers for Plated Truss. You can also view product information related to the categories of: Fire Wall Hangers for Solid Sawn Lumber, Fire Wall Hangers for Engineered Wood

The DGF fire wall hanger series features three models and is an ideal time-saving solution for multi-family, multi-level building construction. The hangers easily install on a two-hour wood stud fire wall (e.g., Type III construction) during framing. They feature enough space for two layers of 5/8" gypsum board (drywall) to be slipped into place after the framing is complete. These hangers have been tested according to ASTM E814 and received F (flame) and T (temperature) ratings for use on one or both sides of the wall. These ratings verify that the hangers do not reduce the two-hour fire wall assembly rating.

The DGHF is a top-flange hanger that connects floor trusses and joists to wood stud walls. The hanger features an angled joist stop whose unique design prevents the joist from seating too far back in the stirrup, creating space for the drywall to be installed between the joist and the wall after framing. The DGHF features a top-flange design allowing hangers to be installed and fit together back to back.

Key Features

  • All models of the DGHF hanger may be ordered with a skew angle of up to 45° or with the top flange offset left or right
  • The two-hour fire wall assembly rating applies to either 2x4 or 2x6 walls
  • If hangers are installed back to back on both sides of the wall, the wall must be 2x6
  • The DGHF has been tested according to ASTM E814 and received F (flame) and T (temperature) ratings that can be found in Intertek Design No. SST/WPCF 120-01

Material

  • 10 gauge

Finish

  • Gray paint

Installation

  • Use all specified fasteners.
  • Hangers are mounted like a standard top-flange hanger.
  • I-joists require web stiffeners to achieve full table loads. I-joists without web stiffeners have reduced loads as shown in the table.
  • When welded to a steel header, the hanger requires two 2" fillet welds along the sides of the top flange and (8) 0.148" x 1 1/2" joist nails to achieve a download of 3,000 lb.; weld size to match hanger thickness.
  • Table uplift loads apply to welded applications.
  • Stud wall–plate splices must occur at a stud location.

Related Literature

Wood Construction Connectors 2021-2023
C-C-2021
A catalog including new product information as well as any applicable specification and installation instructions for wood-to-wood and wood-to-concrete structural connectors.
Catalog
Your Go-To, Load-Rated Fire Wall Hanger
F-C-DGFHANGER19
A flier providing illustrations, allowable loads and model tables for the DGF fire wall hangers, which easily install on a two-hour wood stud fire wall during framing.
Flier
Allowable Loads for DGF/DGHF Hangers Installed Over Wood Structural Panel Sheathing
L-C-DGFOSB21
The Simpson Strong-Tie® DGF and DGHF series fire wall hangers are designed for installation on a 2-hour fire wall and do not require gypsum board (drywall) to be installed at time of framing.
Engineering Letter

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Joist Size Ga. W (in.) H (in.) Coating/Material Packaging Qty.
DGHF1.81/11.88 1 3/4 x 11 7/8 10 1 13/16 11 13/16 Simpson Strong-Tie Gray Paint 1
DGHF1.81/14 1 3/4 x 14 10 1 13/16 13 15/16 Simpson Strong-Tie Gray Paint 1
DGHF1.81/16 1 3/4 x 16 10 1 13/16 15 15/16 Simpson Strong-Tie Gray Paint 1
DGHF1.81/9.5 1 3/4 x 9 1/2 10 1 13/16 9 7/16 Simpson Strong-Tie Gray Paint 1
DGHF2.1/11.88 2 or 2 1/16 x 11 7/8 10 2 1/8 11 13/16 Simpson Strong-Tie Gray Paint 1
DGHF2.1/14 2 or 2 1/16 x 14 10 2 1/8 13 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.1/16 2 or 2 1/16 x 16 10 2 1/8 15 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.1/9.5 2 or 2 1/16 x 9 1/2 10 2 1/8 9 7/16 Simpson Strong-Tie Gray Paint 1
DGHF2.37/11.88 2 5/16 x 11 7/8 10 2 3/8 11 13/16 Simpson Strong-Tie Gray Paint 1
DGHF2.37/14 2 5/16 x 14 10 2 3/8 13 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.37/16 2 5/16 x 16 10 2 3/8 15 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.37/18 2 5/16 x 18 10 2 3/8 17 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.37/20 2 5/16 x 20 10 2 3/8 19 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.37/9.5 2 5/16 x 9 1/2 10 2 3/8 9 7/16 Simpson Strong-Tie Gray Paint 1
DGHF2.56/11.25 2 1/2 x 11 1/4 10 2 5/8 11 3/16 Simpson Strong-Tie Gray Paint 1
DGHF2.56/11.88 2 1/2 x 11 7/8 10 2 5/8 11 13/16 Simpson Strong-Tie Gray Paint 1
DGHF2.56/14 2 1/2 x 14 10 2 5/8 13 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.56/16 2 1/2 x 16 10 2 5/8 15 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.56/18 2 1/2 x 18 10 2 5/8 17 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.56/20 2 1/2 x 20 10 2 5/8 19 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.56/22 2 1/2 x 22 10 2 9/16 21 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.56/24 2 1/2 x 24 10 2 9/16 23 15/16 Simpson Strong-Tie Gray Paint 1
DGHF2.56/9.25 2 1/2 x 9 1/4 10 2 5/8 9 3/16 Simpson Strong-Tie Gray Paint 1
DGHF2.56/9.5 2 1/2 x 9 1/2 10 2 5/8 9 7/16 Simpson Strong-Tie Gray Paint 1
DGHF3.62/11.25 3 1/2 x 11 1/4 10 3 5/8 11 3/16 Simpson Strong-Tie Gray Paint 1
DGHF3.62/11.88 3 1/2 x 11 7/8 10 3 5/8 11 13/16 Simpson Strong-Tie Gray Paint 1
DGHF3.62/14 3 1/2 x 14 10 3 5/8 13 15/16 Simpson Strong-Tie Gray Paint 1
DGHF3.62/16 3 1/2 x 16 10 3 5/8 15 15/16 Simpson Strong-Tie Gray Paint 1
DGHF3.62/18 3 1/2 x 18 10 3 5/8 17 15/16 Simpson Strong-Tie Gray Paint 1
DGHF3.62/20 3 1/2 x 20 10 3 5/8 19 15/16 Simpson Strong-Tie Gray Paint 1
DGHF3.62/22 3 1/2 x 22 10 3 5/8 21 15/16 Simpson Strong-Tie Gray Paint 1
DGHF3.62/24 3 1/2 x 24 10 3 5/8 23 15/16 Simpson Strong-Tie Gray Paint 1
DGHF3.62/9.25 3 1/2 x 9 1/4 10 3 5/8 9 3/16 Simpson Strong-Tie Gray Paint 1
DGHF3.62/9.5 3 1/2 x 9 1/2 10 3 5/8 9 7/16 Simpson Strong-Tie Gray Paint 1

Load Tables

Allowable Loads on 2x4 or 2x6 Wall

Model Ga. Joist Depth (in.) Fasteners (in.) Web Stiff Req'd DF/SP SPF/HF
Top Face Joist Uplift
(160)		 Download (100/125) Uplift
(160)		 Download (100/125)
Studwall 2x, 3x
Nailer		 (2) 2x, 4x
Nailer		 Studwall 2x, 3x
Nailer		 (2) 2x, 4x
Nailer
DGF 12 7 1/4 to 11 1/4 (6) 0.148 x 3 (4) 0.148 x 3 (2) 0.148 x 1 1/2 — 130 1,160 — 1,160 110 1,130 — 1,130
(6) 0.148 x 1 1/2 — (6) 0.148 x 1 1/2 220 1,350 1,350 1,350 190 1,315 1,315 1,315
(6) 0.148 x 3 — (6) 0.148 x 1 1/2 315 1,420 — 1,420 270 1,385 — 1,385
DGF 12 11 7/8 to 24 (6) 0.148 x 3 (4) 0.148 x 3 (2) 0.148 x 1 1/2 — 130 1,160 — 1,160 110 1,130 — 1,130
(6) 0.148 x 1 1/2 — (6) 0.148 x 1 1/2 315 1,620 1,620 1,620 270 1,450 1,450 1,450
(6) 0.148 x 3 — (6) 0.148 x 1 1/2 315 1,705 — 1,705 270 1,525 — 1,525
DGHF 10 7 1/4 to 24 (5) 0.148 x 1 1/2 (2) 0.148 x 3 (8) 0.148 x 1 1/2 855 2,030 2,030 2,030 650 1,855 1,855 1,855
(5) 0.148 x 3 (2) 0.148 x 3 (8) 0.148 x 1 1/2 900 2,135 — 2,135 770 1,950 — 1,950
DGBF (over studs) 7 9 1/2 to 24 (8) 0.148 x 3 (4) 0.148 x 3 (8) 0.148 x 3 1,040 3,015 — 3,015 890 2,280 — 2,280
DGHF (skewed) 10 7 1/4 to 24 (5) 0.148 x 3 (2) 0.148 x 3 (8) 0.148 x 1 1/2 315 1,620 — 1,620 270 1,350 — 1,350
DGHF (offset) 10 7 1/4 to 24 (5) 0.148 x 3 (2) 0.148 x 3 (8) 0.148 x 1 1/2 870 2,010 — 2,010 755 1,705 1,550 —
  1. Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern.
  2. Allowable loads are for 2x4 minimum stud wall or nailer. Back-to-back installations require a minimum 2x6. Wall design by designer.
  3. For hangers spaced closer than 16" o.c., the allowable load shall be reduced proportionately.
  4. DGBF installation requires a minimum (2) 2x4 stud or post in the wall at hanger location. Post design by designer.
  5. DGHF hangers may be skewed up to 45. Skew and offset options cannot be combined.
  6. Face nails for DGHF (offset) may be installed in any two holes.
  7. DGF and DGHF may be installed over 5/8" maximum wood structural panel sheathing. For DGF, use 0.87 of the table loads for uplift and download. For DGHF, use 0.91 of table loads for uplift and full table downloads. Sheathing shall be installed flush with top of the wall and fastened per code.
  8. Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products