text.skipToContent text.skipToNavigation

 

DGF Fire Wall Hanger

DGF

On This Page

Fire Wall Hangers for Solid Sawn Lumber

This product's information may differ depending on the category of use. You are currently viewing details related to Fire Wall Hangers for Solid Sawn Lumber. You can also view product information related to the categories of: Fire Wall Hangers for Plated Truss, Fire Wall Hangers for Engineered Wood

The patent-pending DGF fire wall hanger series features three models and is an ideal time-saving solution for multi-family, multi-level building construction. The hangers easily install on a two-hour wood stud fire wall (e.g., Type III construction) during framing. They feature enough space for two layers of 5/8" gypsum board (drywall) to be slipped into place after the framing is complete. These hangers have been tested according to ASTM E814 and received F (flame) and T (temperature) ratings for use on one or both sides of the wall. These ratings verify that the hangers do not reduce the two-hour fire wall assembly rating.

The DGF is a top-flange hanger that connects floor trusses and joists to wood stud walls. The hanger features a v-shaped joist stop at the top whose unique design prevents the joist from seating too far back in the stirrup, creating space for the drywall to be installed between the joist and the wall after framing. This economical hanger provides joist support for the majority of Type III construction projects.

Key Features

  • The two-hour fire wall assembly rating applies to either 2x4 or 2x6 walls
  • If hangers are installed back to back on both sides of the wall, the wall must be 2x6
  • The DGF has been tested according to ASTM E814 and received F (flame) and T (temperature) ratings that can be found in Intertek Design No. SST/WPCF 120-01

Material

  • 12 gauge

Finish

  • Zinc galvanized, G90

Installation

  • Use all specified fasteners.
  • Hangers are mounted like a standard top-flange hanger.
  • I-joists require web stiffeners to achieve full table loads. I-joists without web stiffeners have reduced loads as shown in the table.
  • When welded to a steel header, the hanger requires four 2" fillet welds along the sides of the top flanges and (6) joist nails to achieve a download of 1,650 lb.; the weld size needs to match the hanger’s thickness.
  • Table uplift loads apply to welded applications.
  • Stud wall–plate splices must occur at a stud location.

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Joist Size Ga. W (in.) H (in.) Coating/Material
DGF1.81/11.88 1 3/4 x 11 7/8 12 1 13/16 11 13/16 Zinc Galvanized, G90
DGF1.81/14 1 3/4 x 14 12 1 13/16 13 15/16 Zinc Galvanized, G90
DGF1.81/16 1 3/4 x 16 12 1 13/16 15 15/16 Zinc Galvanized, G90
DGF1.81/9.5 1 3/4 x 9 1/2 12 1 13/16 9 7/16 Zinc Galvanized, G90
DGF2.1/11.88 2 1/16 x 11 7/8 12 2 1/8 11 13/16 Zinc Galvanized, G90
DGF2.1/14 2 1/16 x 14 12 2 1/8 11 15/16 Zinc Galvanized, G90
DGF2.1/16 2 1/16 x 16 12 2 1/8 15 15/16 Zinc Galvanized, G90
DGF2.1/9.5 2 1/16 x 9 1/2 12 2 1/8 9 7/16 Zinc Galvanized, G90
DGF2.37/11.88 2 5/16 x 11 7/8 12 2 3/8 11 13/16 Zinc Galvanized, G90
DGF2.37/14 2 5/16 x 14 12 2 3/8 13 15/16 Zinc Galvanized, G90
DGF2.37/16 2 5/16 x 16 12 2 3/8 15 15/16 Zinc Galvanized, G90
DGF2.37/18 2 5/16 x 18 12 2 3/8 17 15/16 Zinc Galvanized, G90
DGF2.37/20 2 5/16 x 20 12 2 3/8 19 15/16 Zinc Galvanized, G90
DGF2.37/9.5 2 5/16 x 9 1/2 12 2 3/8 9 7/16 Zinc Galvanized, G90
DGF2.56/11.88 2 1/2 x 11 7/8 12 2 5/8 11 13/16 Zinc Galvanized, G90
DGF2.56/14 2 1/2 x 14 12 2 5/8 13 15/16 Zinc Galvanized, G90
DGF2.56/16 2 1/2 x 16 12 2 5/8 15 15/16 Zinc Galvanized, G90
DGF2.56/18 2 1/2 x 18 12 2 5/8 17 15/16 Zinc Galvanized, G90
DGF2.56/20 2 1/2 x 20 12 2 5/8 19 15/16 Zinc Galvanized, G90
DGF2.56/22 2 1/2 x 22 12 2 9/16 21 15/16 Zinc Galvanized, G90
DGF2.56/24 2 1/2 x 24 12 2 9/16 23 15/16 Zinc Galvanized, G90
DGF2.56/9.5 2 1/2 x 9 1/2 12 2 5/8 9 7/16 Zinc Galvanized, G90
DGF210 2x10 12 1 9/16 9 1/8 Zinc Galvanized, G90
DGF212 2x12 12 1 9/16 11 1/8 Zinc Galvanized, G90
DGF28 2x8 12 1 9/16 7 1/8 Zinc Galvanized, G90
DGF3.62/11.25 3 1/2 x 11 1/4 12 3 5/8 11 3/16 Zinc Galvanized, G90
DGF3.62/11.88 3 1/2 x 11 7/8 12 3 5/8 11 13/16 Zinc Galvanized, G90
DGF3.62/14 3 1/2 x 14 12 3 5/8 13 15/16 Zinc Galvanized, G90
DGF3.62/16 3 1/2 x 16 12 3 5/8 15 15/16 Zinc Galvanized, G90
DGF3.62/18 3 1/2 x 18 12 3 5/8 17 15/16 Zinc Galvanized, G90
DGF3.62/20 3 1/2 x 20 12 3 5/8 19 15/16 Zinc Galvanized, G90
DGF3.62/22 3 1/2 x 22 12 3 5/8 21 15/16 Zinc Galvanized, G90
DGF3.62/24 3 1/2 x 24 12 3 5/8 23 15/16 Zinc Galvanized, G90
DGF3.62/9.25 3 1/2 x 9 1/4 12 3 5/8 9 3/16 Zinc Galvanized, G90
DGF3.62/9.5 3 1/2 x 9 1/2 12 3 5/8 9 7/16 Zinc Galvanized, G90

Load Tables

Allowable Loads on 2x4 or 2x6 Wall

Model Ga. Joist Depth (in.) Fasteners (in.) Web Stiff Req'd DF/SP SPF/HF
Top Face Joist Uplift
(160)
Download (100/125) Uplift
(160)
Download (100/125)
Studwall 2x, 3x
Nailer
(2) 2x, 4x
Nailer
Studwall 2x, 3x
Nailer
(2) 2x, 4x
Nailer
DGF 12 7 1/4 to 11 1/4 (6) 0.148 x 3 (4) 0.148 x 3 (2) 0.148 x 1 1/2 130 1,160 1,160 110 1,130 1,130
(6) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 220 1,350 1,350 1,350 190 1,315 1,315 1,315
(6) 0.148 x 3 (6) 0.148 x 1 1/2 315 1,420 1,420 270 1,385 1,385
DGF 12 11 7/8 to 24 (6) 0.148 x 3 (4) 0.148 x 3 (2) 0.148 x 1 1/2 130 1,160 1,160 110 1,130 1,130
(6) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 315 1,620 1,620 1,620 270 1,450 1,450 1,450
(6) 0.148 x 3 (6) 0.148 x 1 1/2 315 1,705 1,705 270 1,525 1,525
DGHF 10 9 1/2 to 24 (5) 0.148 x 1 1/2 (2) 0.148 x 3 (8) 0.148 x 1 1/2 855 2,030 2,030 2,030 650 1,855 1,855 1,855
(5) 0.148 x 3 (2) 0.148 x 3 (8) 0.148 x 1 1/2 900 2,135 2,135 770 1,950 1,950
DGBF (over studs) 7 9 1/2 to 24 (8) 0.148 x 3 (4) 0.148 x 3 (8) 0.148 x 3 1,040 3,015 3,015 890 2,280 2,280
DGHF (skewed) 10 9 1/2 to 24 (5) 0.148 x 3 (2) 0.148 x 3 (8) 0.148 x 1 1/2 315 1,620 1,620 270 1,350 1,350
DGHF (offset) 10 9 1/2 to 24 (5) 0.148 x 3 (2) 0.148 x 3 (8) 0.148 x 1 1/2 870 2,010 2,010 755 1,705 1,550
  1. Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern.
  2. Allowable loads are for 2x4 minimum stud wall or nailer. Back-to-back installations require a minimum 2x6. Wall design by Designer.
  3. Hangers spaced closer than 16" o.c. shall reduce allowable load proportionately.
  4. DGBF installation requires a minimum (2) 2x4 stud or post in the wall at hanger location. Post design by Designer.
  5. DGHF hangers may be skewed up to 45. Skew and offset options cannot be combined.
  6. Face nails for DGHF (offset) may be installed in any two holes.
  7. Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.