We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

DU Face-Mount Fire Wall Hanger

DU

On This Page

Fire Wall Hangers for Solid Sawn Lumber

This product's information may differ depending on the category of use. You are currently viewing details related to Fire Wall Hangers for Solid Sawn Lumber. You can also view product information related to the categories of: Fire Wall Hangers for Plated Truss, Fire Wall Hangers for Engineered Wood

Engineered and tested to perform, Simpson Strong-Tie® hangers are manufactured to the highest quality standards for structural strength and safety. The DU face-mount hanger is designed for lighter use to carry joist floor loads to a wood stud wall over two layers of 5/8" gypsum board (drywall). The DU hanger installs after the drywall is in place.

Key Features

  • Testing verifies that the DU hangers do not reduce the two-hour fire wall assembly rating in either 2x4 or 2x6 walls.
  • DU fire wall hangers are code listed for structural use under ICC-ES ESR-2552.
  • Hangers have been tested according to ASTM E814 and received F (flame) and T (temperature) ratings for use on one or both sides of the wall in Intertek Design No. SST/WPCF 120-01. If hangers are installed on both sides of the wall, then it must be a 2x6 wall.

Material

  • 14 gauge

Finish

  • Galvanized

Installation

  • Use all specified fasteners; see General Notes.
  • Strong-Drive® SDS Heavy-Duty Connector screws are provided with the hanger.
  • Drywall is installed first.
  • Mounted with top of hanger flush with top of wall and tight to the drywall.
  • Wall top plates must be restrained to prevent rotation. Where gravity load on top of wall is less than 150 plf, use a stud-plate tie connector at the back of each stud or provide equivalent restraint by another method as determined by designer.
  • Upper plate splices must occur at a stud location.

Related Literature

Wood Construction Connectors 2021-2023
C-C-2021
A catalog including new product information as well as any applicable specification and installation instructions for wood-to-wood and wood-to-concrete structural connectors.
Catalog
Conectores para la construcción con madera 2021–2023
C-C-2021SP
El catálogo incluye información sobre nuevos productos, así como especificaciones e instrucciones de instalación aplicables para conectores estructurales de madera a madera y de madera a concreto.
Catalog
Face-Mount Hangers Over Two Layers of 5/8" Gypsum Board
L-C-FACEMNTFW21
This letter provides allowable loads and installation information for face-mount hangers installed over two layers of 5/8" gypsum board with Strong-Drive® SDS Heavy-Duty Connector screws.
Engineering Letter

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Joist Size Ga. W (in.) H (in.) B (in.) Coating/Material Product Includes Packaging Qty.
DU1.81/11.88 1-3/4 in. x 11-7/8 in. 14 1 13/16 11 13/16 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU1.81/14 1-3/4 in. x 14 in. 14 1 13/16 13 15/16 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU1.81/9.5 1-3/4 in. x 9-1/2 in. 14 1 13/16 9 7/16 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU2.1/11.88 2 to 2-1/16 in. x 11-7/8 in. 14 2 1/8 11 13/16 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU2.1/14 2 to 2-1/16 in. x 14 in. 14 2 1/8 13 15/16 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU2.1/9.5 2 to 2-1/16 in. x 9-1/2 in. 14 2 1/8 9 7/16 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU2.37/11.88 2-5/16 in. x 11-7/8 in. 14 2 3/8 11 13/16 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU2.37/14 2-5/16 in. x 14 in. 14 2 3/8 13 15/16 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU2.37/16 2-5/16 in. x 16 in. 14 2 3/8 15 15/16 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU2.37/9.5 2-5/16 in. x 9-1/2 in. 14 2 3/8 9 7/16 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU210 2x10 14 1 9/16 9 1/8 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1
DU212 2x12 14 1 9/16 11 1/8 2 Zinc Galvanized, G90 (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws 1

Product Information Tables

Load Tables

DU Load Table
  1. Loads assume 5/8" Type X drywall attached per IBC. Wall assembly must consist at a minimum of two 2x4 plate members with studs spaced not more than 16" o.c. For alternative solutions to mounting over a single layer of drywall, refer to the technical bulletin T-C-TFWALL.
  2. Hangers spaced closer than 16" o.c. shall reduce allowable load proportionately.
  3. Triangular nail holes may be filled with (4) additional 0.148" x 1 1/2" to achieve an allowable upliftl load of 750 lb.
  4. DF carried members with a minimum of 1 1/2" x 2 1/2" solid sawn chord dimensions may increase Allowable Uplift Load to 170 lb.
  5. For a DU two-sided (back-to-back) application on a 2x6 wall, use 1,075 lb. allowable download for DF/SP plates and 880 lb. for SPF/HF plates.
  6. For the DU, if a 5/8" structural wood panel is used between the drywall and the studs, use 1,110 lb. allowable download for DF/SP plates and 880 lb. for SPF/HF plates.

Fastener Table

DU Fastener Table

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products

DHU
DHU
Face-Mount Fire Wall Hanger
DHUTF
DHUTF
Top-Flange Fire Wall Hanger