We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

text.skipToContent text.skipToNavigation

GDPSK Spiral Knurl Gas Pins

GDPSK

On This Page

GDPSK gas pins are designed for attaching plywood and OSB to cold-formed-steel studs. The spiral knurl provides a positive lock and resists back-out. Installed with the GCN-MEPMAG, the GDPSK-138 gas pin provides faster installation and setup times, which contributes to lower labor costs. The hardened pins quickly and cleanly pierce the cold-formed steel and leave the pin head flush with the wood fixture. The 1 3/8" length pin can be used for 1/2"–3/4" thick plywood, and 14–22 gauge steel.

Related Literature

2019–2021 Product Guide — Anchoring, Fastening Systems and Restoration Solutions for Concrete and Masonry
S-A-PG19
A product guide for Simpson Strong-Tie® providing information on adhesives, mechanical anchors, direct fastening, carbide drill bits, and concrete restoration products, for concrete and masonry.
Product Guide
Anchoring, Fastening and Restoration Systems for Concrete and Masonry
C-A-2018
A comprehensive product and information catalog for Anchoring, Fastening and Restoration Systems products for concrete and masonry.
Catalog
Sistemas de anclaje, sujeción y restauración para concreto y mampostería
C-A-2018SP
Un catálogo completo de productos e información para los sistemas de anclaje, sujeción y restauración para concreto y mampostería.
Catalog
2019–2021 Guía de productos - Anclaje, sistemas de sujeción y soluciones de restauración para concreto y mampostería
S-A-PG19SP
Guía de productos para Simpson Strong-Tie® con información sobre anclajes adhesivos, anclajes mecánicos, sujeción directa, brocas de carburo y productos para restauración para concreto y mampostería.
Product Guide
Simpson Strong-Tie® Suggested General Notes for Anchoring Systems (DOC)
SIMPSON-GENERAL-NOTES-AS_June2020
This comprehensive note is provided to the designer in order to specify the "design basis" post ­installed anchor products to be used on the project.
MasterFormat® Specification
Simpson Strong-Tie® Suggested General Notes for Anchoring Systems (PDF)
SIMPSON-GENERAL-NOTES-AS_June2020
This comprehensive note is provided to the designer in order to specify the "design basis" post ­installed anchor products to be used on the project.
MasterFormat® Specification

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Length (in.) Head Diameter (in.) Product Includes Compatible Tools Packaging Qty. Packs/Carton
GDPSK-138KT 1 3/8 0.250 Includes 1 fuel cell. GCN-MEPMAG 1000 5

Product Information Tables

Spiral Knurl Gas Pins
Model No. Length (in.) Qty. Pins / Pack +1 Fuel Cell Packs/ Carton Compatible with These Tools
GDPSK-138KT 1 3/8 1,000 5 Simpson Strong-Tie: GCN-MEPMAG
Others: TF1100, C3

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products