GRH Gas-Actuated Rod Hanger Assembly
On This Page
Product Details
The GRH is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure 1/4" or 3/8" threaded rods to concrete. The versatile GRH assembly consists of a smooth-shank fastener, with a premounted cold-formed steel bracket that features a threaded hole for the hanging rod. This rod hanger is for high-volume applications and works with gas-actuated concrete nailer tools as well as with common powder-actuated tools for fastening into harder substrates (structural steel or extra-hard concrete) when required.
Key Features
- The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
- Designed for use with Simpson Strong-Tie® GCN-MEP tools and compatible with many other concrete nailers and PAT equipment
Design Information and Load Tables
Related Literature
Product Information Table
| Model No. | Description | Pin Length (in.) | Pin Head Dia. (in.) | Pin Shank Dia. (in.) | Compatible Tools | Packaging Qty. | Packs/Carton |
|---|---|---|---|---|---|---|---|
| GRH25-R100 | 1/4"-20 threaded rod hanger (0.063"-thick) with pin | 1 | 0.283 | 0.126 | GCN-MEPMAG | 100 | 6 |
| GRH37-R100 | 3/8"-16 threaded rod hanger (0.063"-thick) with pin | 1 | 0.283 | 0.126 | GCN-MEPMAG | 100 | 6 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
