HSLQ™ Heavy Shear Transfer Angle
Product Details
The HSLQ heavy shear transfer angle is designed to transfer lateral loads from wood solid sawn joists or blocking into a wood solid sawn element such as a moment frame nailer. The angle offers versatility by allowing up to a 2" gap between the structural members and easy installation with Strong-Drive® SDS Heavy-Duty Connector screws that are included with the HSLQ. The HSLQ is manufactured with a gap indication notch to make proper installation easy.
Material
- 12 gauge
Finish
- Galvanized, available in HDG
Installation
- Use all specified fasteners; see General Notes.
- Use long leg with notch indicator. (Notch indicates maximum allowed gap.)
- Minimum 4x8 wood members are required.
- Add filler shims where required in order not to load the angle in any direction other than lateral, as indicated.
Related Literature
Product Information Table
| Model No. | Ga. | W1 (in.) | W2 (in.) | L (in.) | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|
| HSLQ312-SDS2.5 | 12 | 3 1/4 | 2 3/4 | 11 3/4 | Zinc Galvanized, G90 | 1 |
| HSLQ37-SDS2.5 | 12 | 3 1/4 | 2 3/4 | 7 1/4 | Zinc Galvanized, G90 | 1 |
| HSLQ412-SDS2.5 | 12 | 4 1/4 | 2 3/4 | 11 3/4 | Zinc Galvanized, G90 | 1 |
| HSLQ47-SDS2.5 | 12 | 4 1/4 | 2 3/4 | 7 1/4 | Zinc Galvanized, G90 | 1 |
Load Tables
- Tables loads are for one angle.
- Loads are applicable to installation on either the narrow or the wide face of the member.
- Minimum 4x8 wood members are required.
- HSLQ is used for in-plane lateral load transfer only. Designer to provide for frame out-of-plane stability as required.
- Fasteners: SDS screws are Simpson Strong-Tie® Strong-Drive® screws. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
