×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

HU Heavy Face-Mount Joist Hanger

Joist Framing Connectors

This product's information may differ depending on the category of use. You are currently viewing details related to Joist Framing Connectors. You can also view product information related to the categories of: Face-Mount Hangers for Solid Sawn Lumber, Face-Mount Hangers for Engineered Wood, Face-Mount Masonry Hangers

The HU hanger is designed for structures requiring face-mounted attachment to steel surfaces. This heavy-duty, face-mount hanger can be welded or screw-attached to structural steel members to support cold-formed steel (CFS) joists. It is available in a variety of sizes to accommodate a wide range of joist sizes and can be special-ordered with a skewable seat and a seat that slopes as far as 45°.

Key Features

  • Face mounted
  • Available standard (HU model) or concealed (see HUC model)
  • Special-order option for skewed or sloped seat to meet application requirements

Material

  • 14 gauge (68 mil)

Finish

  • Galvanized. Some products available in ZMAX® coating; see Corrosion Information.

Installation

  • Use all specified fasteners. See General Notes.
  • Single joist — fill all round holes on one leg with #10 screws to web of joist.
  • Boxed joist — fill all round holes on both legs with #10 screws to web of both joists.
  • Screw-attach to steel — fill all round holes on both flanges to structural steel support.
  • Weld-attach to steel — use 1" weld segments equally spaced top and bottom with half the segments on each side of hanger. Welds may be either lap joint (on outside edge of flanges) or flare-bevel groove (on flange bend line).

Options

  • For both flanges concealed, order HUC
  • See table-modifications table for available options and associated load capacities for HU hangers
  • For ease of ordering, refer to technical bulletin U/HU Hangers (T-C-U-HU-WS)

Related Literature

Connectors, Fasteners & Anchors for Mass Timber Construction
C-C-MASSTIMBER24
A catalog featuring connectors, fasteners and anchors for mass timber and CLT construction solutions.
Catalog
Wood Construction Connectors 2024-2025
C-C-2024
A catalog including new product information as well as any applicable specification and installation instructions for wood-to-wood and wood-to-concrete structural connectors.
Catalog
Conectores para la construcción con madera 2021–2023
C-C-2021SP
El catálogo incluye información sobre nuevos productos, así como especificaciones e instrucciones de instalación aplicables para conectores estructurales de madera a madera y de madera a concreto.
Catalog
Wood Construction Connectors – Canadian Limit States Design
C-C-CAN2022
A complete product and application catalogue including load tables and installation information for wood-to-wood, wood-to-concrete and wood-to-masonry connectors.
Catalog
Connecteurs pour constructions en bois — Conception aux états limites canadiens
C-C-CAN2022CF
Un catalogue complet sur les produits et les applications, y compris de l’information sur l’installation et les tableaux de charge pour les connecteurs bois-à-bois, bois-à-béton et bois-à-maçonnerie.
Catalog
U/HU Hangers
T-C-U-HU-WS24
A special-order worksheet for U/HU hangers.
Worksheet
Connection Solutions to Meet the DCA6 Prescriptive Residential Wood Deck Construction Guide
T-C-DCA6DECK21
A technical bulletin providing Simpson Strong-Tie connector, fastener and anchor solutions to meet the DCA6 provisions of the 2015 IRC for single-level, residential wood decks.
Technical Bulletin
Hangers on Rim Board Headers
T-C-RIMBDHGR24
A technical bulletin discussing when face-mount and top-flange hangers can be used with an engineered “rim board” wood product.
Technical Bulletin
HU/HUC Welded onto Steel Members
T-C-HUHUC-W24
A technical bulletin including updated load calculations for current steel specifications and AISI safety factors.
Technical Bulletin
HU/HUC Hangers — Cold-Formed Steel (CFS) to Masonry/Concrete Applications
L-CF-HUHUCTNT23
This letter provides allowable loads as the lower of tests or calculations for the CFS members and calculations for the ¼" x 2¼" TNT screw attached to GFCMU (TNT to GFCMU tests did not control).
Engineering Letter
Face-Mount Hangers over Wood Structural Panel
L-C-FCMNTSHTG24
Face-mount Hangers Installed Over Wood Structural Panel Sheathing.
Engineering Letter
Connector Selector Guide for Residential Construction for Use with ALLJOIST®
CSG-AJSUS23
A 12-page guide that lists popular Simpson Strong-Tie hanger options for use with engineered wood products manufactured by ALLJOIST.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with Boise Cascade
CSG-BCUS23
A 12-page guide that lists popular Simpson Strong-Tie hanger options for use with engineered wood products manufactured by Boise Cascade.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with LP Building Solutions
CSG-LPUS23
A 12-page guide that lists popular Simpson Strong-Tie hanger options for use with engineered wood products manufactured by LP Building Solutions.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with Nordic Structures
CSG-NIUS23
A 12-page guide that lists popular Simpson Strong-Tie hanger options for use with engineered wood products manufactured by Nordic Structures.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with Pacific Woodtech
CSG-PWTUS23
A 12-page guide that lists popular Simpson Strong-Tie® hanger options for use with engineered wood products manufactured by Pacific Woodtech.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with Pinkwood
CSG-PWUS23
A 10-page guide that lists popular Simpson Strong-Tie® hanger options for use with engineered wood products manufactured by Pinkwood.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with Roseburg
CSG-RFPUS23
A 12-page guide that lists popular Simpson Strong-Tie® hanger options for use with engineered wood products manufactured by Roseburg.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with TrusJoist
CSG-TJUS23
A 12-page guide that lists popular options for Simpson Strong-Tie hangers used with TrusJoist.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with ALLJOIST® — Limited States Design
CSG-AJSCAN23
A 12-page Canadian guide that lists popular Simpson Strong-Tie hanger options for use with engineered wood products manufactured by ALLJOIST.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with Boise Cascade — Limited States Design
CSG-BCCAN23
A 12-page Canadian guide that lists popular Simpson Strong-Tie hanger options for use with engineered wood products manufactured by Boise Cascade.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with LP Building Solutions — Limited States Design
CSG-LPCAN23
A 12-page Canadian guide that lists popular Simpson Strong-Tie hanger options for use with engineered wood products manufactured by LP Building Solutions.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with Nordic Structures — Limited States Design
CSG-NICAN23
A 12-page Canadian guide that lists popular Simpson Strong-Tie hanger options for use with engineered wood products manufactured by Nordic Structures.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with Pinkwood — Limited States Design
CSG-PWCAN23
A 10-page Canadian guide that lists popular Simpson Strong-Tie® hanger options for use with engineered wood products manufactured by Pinkwood.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with Roseburg — Limited States Design
CSG-RFPCAN23
A 12-page Canadian guide that lists popular Simpson Strong-Tie® hanger options for use with engineered wood products manufactured by Roseburg.
Connector Selection Guide
Connector Selector Guide for Residential Construction for Use with TrusJoist
CSG-TJCAN23
A 12-page guide that lists popular options for Simpson Strong-Tie hangers used with TrusJoist.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par ALLJOIST®.
CSG-AJSCAN23CF
Un guide canadien de 12 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par ALLJOIST®.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par Boise Cascade
CSG-BCCAN23CF
Un guide canadien de 12 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par Boise Cascade.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par LP Solutions de Batment
CSG-LPCAN23CF
Un guide canadien de 12 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-tie avec les produits en bois d’ingénierie fabriques par LP Building Solutions.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par Nordic Structures
CSG-NICAN23CF
Un guide canadien de 12 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par Nordic Structures.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par Pinkwood
CSG-PWCAN23CF
Un guide canadien de 10 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par Pinkwood.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par Roseburg
CSG-RFPCAN23CF
Un guide canadien de 12 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par Roseburg.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par TrusJoist
CSG-TJCAN23CF
Un guide canadien de 12 pages qui repertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par TrusJoist.
Connector Selection Guide
Engineered Wood/SCL Connector Guide
WC-C-EWPBI24
A bilingual (English-Spanish) wall chart featuring product and installation illustrations of top-selling EWP/SCL connectors.

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Ga. W (in.) H (in.) B (in.) Coating/Material Packaging Qty.
HU1.81/5 14 1 13/16 5 3/8 2 1/2 Zinc Galvanized, G90 1
HU11 14 1 13/16 11 1/16 2 1/2 Zinc Galvanized, G90 1
HU14 14 1 13/16 13 11/16 2 1/2 Zinc Galvanized, G90 1
HU2.1/11 14 2 1/8 11 2 1/2 Zinc Galvanized, G90 1
HU2.1/9 14 2 1/8 9 3/16 2 1/2 Zinc Galvanized, G90 1
HU2.75/10 14 2 3/4 9 2 1/2 Zinc Galvanized, G90 1
HU2.75/12 14 2 3/4 10 3/4 2 1/2 Zinc Galvanized, G90 1
HU2.75/14 14 2 3/4 13 2 1/2 Zinc Galvanized, G90 1
HU210 14 1 9/16 7 1/8 2 1/4 Zinc Galvanized, G90 1
HU210-2 14 3 1/8 8 5/8 2 1/2 Zinc Galvanized, G90 1
HU210-3 14 4 11/16 8 1/16 2 1/2 Zinc Galvanized, G90 1
HU210-3Z 14 4 11/16 8 1/16 2 1/2 ZMAX® 1
HU210-4 14 6 1/8 8 3/8 2 1/2 Zinc Galvanized, G90 1
HU210Z 14 1 9/16 7 1/8 2 1/4 ZMAX® 1
HU212 14 1 9/16 9 2 1/4 Zinc Galvanized, G90 1
HU212-2 14 3 1/8 10 9/16 2 1/2 Zinc Galvanized, G90 1
HU212-3 14 4 11/16 9 13/16 2 1/2 Zinc Galvanized, G90 1
HU214 14 1 9/16 10 1/8 2 1/4 Zinc Galvanized, G90 1
HU214-2 14 3 1/8 12 1/8 2 1/2 Zinc Galvanized, G90 1
HU214-3 14 4 11/16 12 1/16 2 1/2 Zinc Galvanized, G90 1
HU216 14 1 9/16 12 15/16 2 1/4 Zinc Galvanized, G90 1
HU216-2 14 3 1/8 13 7/8 2 1/2 Zinc Galvanized, G90 1
HU216-3 14 4 11/16 13 7/8 2 1/2 Zinc Galvanized, G90 1
HU24-2 14 3 1/8 3 1/16 2 1/2 Zinc Galvanized, G90 1
HU26 14 1 9/16 3 1/16 2 1/4 Zinc Galvanized, G90 1
HU26-2 14 3 1/8 4 15/16 2 1/2 Zinc Galvanized, G90 1
HU26-3 14 4 11/16 4 5/8 2 1/2 Zinc Galvanized, G90 1
HU28 14 1 9/16 5 1/4 2 1/4 Zinc Galvanized, G90 1
HU28-2 14 3 1/8 6 5/16 2 1/2 Zinc Galvanized, G90 1
HU28-4 14 6 1/8 7 2 1/2 Zinc Galvanized, G90 1
HU3.25/10.5 14 3 1/4 10 1/4 2 1/2 Zinc Galvanized, G90 1
HU3.25/12 14 3 1/4 11 3/4 2 1/2 Zinc Galvanized, G90 1
HU3.25/16 14 3 1/4 13 13/16 2 1/2 Zinc Galvanized, G90 1
HU310 14 2 9/16 8 7/8 2 1/2 Zinc Galvanized, G90 1
HU310-2 14 5 1/8 7 13/16 2 1/2 Zinc Galvanized, G90 1
HU312 14 2 9/16 10 7/8 2 1/2 Zinc Galvanized, G90 1
HU312-2 14 5 1/8 10 5/8 2 1/2 Zinc Galvanized, G90 1
HU314 14 2 9/16 12 7/16 2 1/2 Zinc Galvanized, G90 1
HU314-2 14 5 1/8 12 5/8 2 1/2 Zinc Galvanized, G90 1
HU316 14 2 9/16 14 5/13 2 1/2 Zinc Galvanized, G90 1
HU34 14 2 9/16 3 3/8 2 1/2 Zinc Galvanized, G90 1
HU3511 14 2 3/8 10 15/16 2 1/2 Zinc Galvanized, G90 1
HU3514 14 2 3/8 12 1/2 2 1/2 Zinc Galvanized, G90 1
HU3514-2 14 4 3/4 13 1/4 2 1/2 Zinc Galvanized, G90 1
HU3516/22 14 2 3/8 14 1/4 2 1/2 Zinc Galvanized, G90 1
HU3516-2 14 4 3/4 15 1/4 2 1/2 Zinc Galvanized, G90 1
HU3520-2 14 4 3/4 19 1/4 2 1/2 Zinc Galvanized, G90 1
HU3524/30 14 2 3/8 18 2 1/2 Zinc Galvanized, G90 1
HU359 14 2 3/8 9 2 1/2 Zinc Galvanized, G90 1
HU36 14 2 9/16 5 1/4 2 1/2 Zinc Galvanized, G90 1
HU36-2 14 5 1/8 4 3/4 2 1/2 Zinc Galvanized, G90 1
HU38 14 2 9/16 5 5/8 2 1/2 Zinc Galvanized, G90 1
HU38-2 14 5 1/8 5 13/16 2 1/2 Zinc Galvanized, G90 1
HU4.12/11 14 4 1/8 10 5/16 2 1/2 Zinc Galvanized, G90 1
HU4.12/9 14 4 1/8 8 5/8 2 1/2 Zinc Galvanized, G90 1
HU4.28/11 14 4 9/32 11 2 1/2 Zinc Galvanized, G90 1
HU4.28/9 14 4 9/32 9 2 1/2 Zinc Galvanized, G90 1
HU4.75/11 14 4 3/4 11 2 1/2 Zinc Galvanized, G90 1
HU4.75/9 14 4 3/4 9 2 1/2 Zinc Galvanized, G90 1
HU410 14 3 9/16 8 3/8 2 1/2 Zinc Galvanized, G90 1
HU410-2 14 7 1/8 8 9/16 2 1/2 Zinc Galvanized, G90 1
HU410SS 14 3 9/16 8 3/8 2 1/2 Stainless Steel 1
HU410Z 14 3 9/16 8 3/8 2 1/2 ZMAX® 1
HU412 14 3 9/16 10 3/8 2 1/2 Zinc Galvanized, G90 1
HU412-2 14 7 1/8 10 13/16 2 1/2 Zinc Galvanized, G90 1
HU412Z 14 3 9/16 10 3/8 2 1/2 ZMAX® 1
HU414 14 3 9/16 11 15/16 2 1/2 Zinc Galvanized, G90 1
HU414-2 14 7 1/8 12 9/16 2 1/2 Zinc Galvanized, G90 1
HU416 14 3 9/16 13 11/16 2 1/2 Zinc Galvanized, G90 1
HU44 14 3 9/16 2 7/8 2 1/2 Zinc Galvanized, G90 1
HU46 14 3 9/16 4 3/4 2 1/2 Zinc Galvanized, G90 1
HU46SS 14 3 9/16 4 3/4 2 1/2 Stainless Steel 1
HU46Z 14 3 9/16 4 3/4 2 1/2 ZMAX® 1
HU48 14 3 9/16 6 1/8 2 1/2 Zinc Galvanized, G90 1
HU48SS 14 3 9/16 6 1/8 2 1/2 Stainless Steel 1
HU48Z 14 3 9/16 6 1/8 2 1/2 ZMAX® 1
HU5.125/12 14 5 1/4 10 1/4 2 1/2 Zinc Galvanized, G90 1
HU5.125/13.5 14 5 1/4 13 1/4 2 1/2 Zinc Galvanized, G90 1
HU5.125/16 14 5 1/4 13 7/8 2 1/2 Zinc Galvanized, G90 1
HU610 14 5 1/2 7 5/8 2 1/2 Zinc Galvanized, G90 1
HU610Z 14 5 1/2 7 5/8 2 1/2 ZMAX® 1
HU612 14 5 1/2 9 3/8 2 1/2 Zinc Galvanized, G90 1
HU612Z 14 5 1/2 9 3/8 2 1/2 ZMAX® 1
HU614 14 5 1/2 11 5/8 2 1/2 Zinc Galvanized, G90 1
HU616 14 5 1/2 13 3/8 2 1/2 Zinc Galvanized, G90 1
HU66 14 5 1/2 4 3/16 2 1/2 Zinc Galvanized, G90 1
HU68 14 5 1/2 5 13/16 2 1/2 Zinc Galvanized, G90 1
HU68Z 14 5 1/2 5 13/16 2 1/2 ZMAX® 1
HU7 14 1 13/16 6 11/16 2 1/2 Zinc Galvanized, G90 1
HU810 14 7 1/2 8 3/8 2 1/2 Zinc Galvanized, G90 1
HU812 14 7 1/2 10 1/8 2 1/2 Zinc Galvanized, G90 1
HU814 14 7 1/2 11 7/8 2 1/2 Zinc Galvanized, G90 1
HU816 14 7 1/2 13 5/8 2 1/2 Zinc Galvanized, G90 1
HU88 14 7 1/2 6 5/8 2 1/2 Zinc Galvanized, G90 1
HU9 14 1 13/16 9 5/16 2 1/2 Zinc Galvanized, G90 1

HU Allowable Loads (lb.)

Model No. Fasteners Joist Depth (in.) Joist Thickness mil(ga.) ASD
Face Joist Download (lb.) Uplift (lb.)
HU36 (8) #12 (2) #10 6 33 (20) 990 355
43 (18) 1,480 525
54 (16) 1,480 915
68 (14) 1,400 1,080
97 (12) 1,400 1,080
HU38 (10) #12 (2) #10 8 33 (20) 825 355
43 (18) 1,220 525
54 (16) 1,220 915
68 (14) 1,500 1,080
97 (12) 1,500 1,080
HU310 (14) #12 (3) #10 10 43 (18) 1,435 790
54 (16) 1,585 1,495
68 (14) 1,995 1,620
97 (12) 1,995 1,620
HU312 (16) #12 (3) #10 12 54 (16) 1,355 1,495
68 (14) 1,985 1,620
97 (12) 1,985 1,620
  1. Loads assume E-70S-6 (60 ksi) filler rod.
  2. Welds must conform to the current AWS D1.3 structural welding code for sheet steel and must be performed by a certified welder.
  3. Designer shall ensure that the joist member adequately transfers load to hanger.
  4. Design loads must not exceed the weld capacities onto steel members of 3,280 lb. for four 1" segment weld, and 4,855 lb. for six 1" segment weld.
  5. Fasteners: For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.


Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products

HUA™
HUA™
Heavy-Duty U-Shaped Architectural Joist Hanger
HUC
HUC
Heavy Concealed-Flange Face-Mount Joist Hanger
LU
LU
Light Face-Mount Joist Hanger
LUC
LUC
Concealed Flange Light Face-Mount Joist Hanger
U
U
Face-Mount Joist Hanger
HUCQ
HUCQ
Heavy Concealed Flange Face-Mount Joist Hanger with SDS Screws