MSTA Medium Strap Tie
Lateral Connectors, Ties and Straps
This product's information may differ depending on the category of use. You are currently viewing details related to Lateral Connectors, Ties and Straps. You can also view product information related to the category: Straight Straps
Product Details
The MSTA is designed to resist tension loads in uplift applications. This medium strap tie utilizes a staggered fastener hole pattern to optimize strength.
Key Features
- Load-rated, precut strap designed for quick installation and optimal performance
- Designed to resist wind and seismic forces
- Floor-to-floor clear span application
Material
- See table
Finish
- Galvanized
Installation
- Use all specified fasteners; see General Notes
Related Literature
Product Information Table
| Model No. | Thickness (mil) | Ga. | W (in.) | L (in.) | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|
| MSTA12 | 43 | 18 | 1 1/4 | 12 | Zinc Galvanized, G90 | 1 |
| MSTA12SS | 43 | 18 | 1 1/4 | 12 | Stainless Steel | 1 |
| MSTA12Z | 43 | 18 | 1 1/4 | 12 | ZMAX® | 1 |
| MSTA15 | 43 | 18 | 1 1/4 | 15 | Zinc Galvanized, G90 | 1 |
| MSTA15Z | 43 | 18 | 1 1/4 | 15 | ZMAX® | 1 |
| MSTA18 | 43 | 18 | 1 1/4 | 18 | Zinc Galvanized, G90 | 1 |
| MSTA18SS | 43 | 18 | 1 1/4 | 18 | Stainless Steel | 1 |
| MSTA18Z | 43 | 18 | 1 1/4 | 18 | ZMAX® | 1 |
| MSTA21 | 43 | 18 | 1 1/4 | 21 | Zinc Galvanized, G90 | 1 |
| MSTA21Z | 43 | 18 | 1 1/4 | 21 | ZMAX® | 1 |
| MSTA24 | 43 | 18 | 1 1/4 | 24 | Zinc Galvanized, G90 | 1 |
| MSTA24SS | 43 | 18 | 1 1/4 | 24 | Stainless Steel | 1 |
| MSTA24Z | 43 | 18 | 1 1/4 | 24 | ZMAX® | 1 |
| MSTA30 | 54 | 16 | 1 1/4 | 30 | Zinc Galvanized, G90 | 1 |
| MSTA30Z | 54 | 16 | 1 1/4 | 30 | ZMAX® | 1 |
| MSTA36 | 54 | 16 | 1 1/4 | 36 | Zinc Galvanized, G90 | 1 |
| MSTA36SS | 54 | 16 | 1 1/4 | 36 | Stainless Steel | 1 |
| MSTA36Z | 54 | 16 | 1 1/4 | 36 | ZMAX® | 1 |
| MSTA49 | 54 | 16 | 1 1/4 | 49 | Zinc Galvanized, G90 | 1 |
| MSTA9 | 43 | 18 | 1 1/4 | 9 | Zinc Galvanized, G90 | 1 |
Load Tables
These products are available with additional corrosion protection. Additional products on this page may also be available with this option. Contact Simpson Strong-Tie for details.
- Use half of the fasteners in each member being connected to achieve the listed loads.
- Loads are based on lesser of steel capacity or fastener calculation.
- Not all fastener holes need to be filled, as additional fastener holes are provided. Install fasteners symmetrically.
- See Fastening Systems for more information on Simpson Strong-Tie fasteners.
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
