Blue Banger Hanger® Metal-Deck Insert Cast-In-Place, Internally Threaded Insert
Multi-thread, cast-in-place metal-deck inserts for cracked and uncracked concrete maximize jobsite efficiency and reduce inventory commitment.
Code-listed under the IBC/IRC in accordance with AC446 for cracked and uncracked concrete applications, per ICC-ES ESR-3707
Multi-thread design allows insert to accept multiple rod diameters
Compression spring keeps insert perpendicular to deck, even if bumped or stepped on after installation
3" plastic sleeve keeps internal threads clean and provides guidance to align threaded rod with the internal threads
Extended sleeve length allows easy location of insert even with fireproofing on the underside of the deck
Installed height of 2" allows insert to be used on top of or between deck flutes
Drill a hole in the metal deck using the appropriate diameter bit as referenced in the table.
Insert the hanger in the hole and strike the top so that the plastic sleeve is forced through the hole and expands against the bottom side of the deck. The anchor can also be installed by stepping on it.
Insert the rod into the sleeve and thread it into the hanger.