Self-Drilling Fiber-Cement Screw
On This Page
Product Details
Key Features
- Wafer head, square drive, self-countersinking nibs under the head.
- Threaded to within 5/16" of top of head.
- #3 drill point.
- #2 square drive (replacement bit model BIT2S-2).
- Type 410 stainless steel is coated for additional corrosion protection.
- Type 410 stainless steel can be hardened through heat treatment, giving it the ability to drill through metal. It does not offer the same level of corrosion resistance of either Type 316 or 305 stainless steel.
Applications
- Fasten fiber-cement products through furring strips to steel studs
Warning
- Hardened stainless-steel fasteners should not be used with steel framing in environments with high humidity, condensation or other moisture that will be present at the dissimilar-metal interface
Ordering Information
- These products are subject to quantities on hand or may require special ordering and are subject to minimum order quantities and longer lead times. Call Simpson Strong‑Tie for details (800) 999-5099.
Related Links
- Fastening Systems Technical and Installation Notes
- See How Self-Drilling Screws Work for more information on drilling thickness capacities and drill speed recommendations
- Driver Bits
Catalog Pages
Related Literature
Product Information Table
| Model No. | Coating/Material | Screw Size | Length (in.) | Head Diameter (in.) | Drive Type | Head Type | TPI | Point Type | Packaging Qty. | UPC |
|---|---|---|---|---|---|---|---|---|---|---|
| F08T162WDB | Type 410 Stainless Steel | #8 | 1 5/8 | 0.390 | #2 Square | Wafer Head | 18 | Drill Point | 3000 | 744039016921 |
| F08T162WDC | Type 410 Stainless Steel | #8 | 1 5/8 | 0.390 | #2 Square | Wafer Head | 18 | Drill Point | 100 | 744039632183 |
| F08T162WDM | Type 410 Stainless Steel | #8 | 1 5/8 | 0.390 | #2 Square | Wafer Head | 18 | Drill Point | 1000 | 744039632190 |
| F08T225WDB | Type 410 Stainless Steel | #8 | 2 1/4 | 0.390 | #2 Square | Wafer Head | 18 | Drill Point | 2500 | 744039611218 |
| F08T225WDC | Type 410 Stainless Steel | #8 | 2 1/4 | 0.390 | #2 Square | Wafer Head | 18 | Drill Point | 100 | 744039632268 |
| F08T225WDM | Type 410 Stainless Steel | #8 | 2 1/4 | 0.390 | #2 Square | Wafer Head | 18 | Drill Point | 1000 | 744039632275 |
Product Information Table
| Model No. | Length (in.) | Screw Size | Drive Type | Head Diameter (in.) | Head Type | TPI | Point Type | Coating/Material | Packaging Quantity | UPC |
|---|---|---|---|---|---|---|---|---|---|---|
| F08T162WDB | 1 5/8 | #8 | #2 Square | 0.390 | Wafer Head | 18 | Drill Point | Type 410 Stainless Steel | 3000 | 744039016921 |
| F08T162WDC | 1 5/8 | #8 | #2 Square | 0.390 | Wafer Head | 18 | Drill Point | Type 410 Stainless Steel | 100 | 744039632183 |
| F08T162WDM | 1 5/8 | #8 | #2 Square | 0.390 | Wafer Head | 18 | Drill Point | Type 410 Stainless Steel | 1000 | 744039632190 |
| F08T225WDB | 2 1/4 | #8 | #2 Square | 0.390 | Wafer Head | 18 | Drill Point | Type 410 Stainless Steel | 2500 | 744039611218 |
| F08T225WDC | 2 1/4 | #8 | #2 Square | 0.390 | Wafer Head | 18 | Drill Point | Type 410 Stainless Steel | 100 | 744039632268 |
| F08T225WDM | 2 1/4 | #8 | #2 Square | 0.390 | Wafer Head | 18 | Drill Point | Type 410 Stainless Steel | 1000 | 744039632275 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
