×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

Self-Drilling Wafer-Head Screw with Wings 

Key Features

  • #2 Phillips drive.
  • Machine-screw thread, threaded full length.
  • Wings above drill point provide clearance hole in work piece so it won’t climb up the shank; wings break off as point engages the steel substrate.
  • #3 drill point.
  • Type 410 stainless steel is coated for additional corrosion protection.
  • Type 410 stainless steel can be hardened through heat treatment, giving it the ability to drill through metal. It does not offer the same level of corrosion resistance of either Type 316 or 305 stainless steel.

Applications

  • Attach plywood and OSB panels to steel studs

Warning

  • Hardened stainless-steel fasteners should not be used with steel framing in environments with high humidity, condensation or other moisture that will be present at the dissimilar-metal interface

Ordering Information

  • These products are subject to quantities on hand or may require special ordering and are subject to minimum order quantities and longer lead times. Call Simpson Strong‑Tie for details (800) 999-5099.

Related Links

Catalog Pages

Related Literature

Fastening Systems Catalog
C-F-2023
A catalog including new product information as well as any applicable specification and installation instructions for Simpson Strong-Tie® fasteners and Quik Drive® systems.
Catalog
Sistemas de sujeción
C-F-2023SP
Catálogo que incluye información sobre productos nuevos y las instrucciones de instalación y especificaciones correspondientes para los sujetadores Simpson Strong-Tie® y los sistemas Quik Drive®.
Catalog
Fastening Systems Technical Supplement for Canada
C-F-2017CANADD
A technical information addendum for Simpson Strong-Tie Fasteners in Canada.
Catalog

Product Information Table

Fastener Production Information and Stuff & Things
These products are subject to quantities on hand or may require special ordering and are subject to minimum order quantities and longer lead times. Call Simpson Strong‑Tie for details (800) 999-5099.
Model No. Coating/Material Screw Size Length (in.) Head Diameter (in.) Drive Type Head Type Thread Type Thread Length (in.) TPI Max. Grip Length (in.) Point Type Point Size Packaging Qty.
Footnotes
  1. Grip length includes side member, steel thickness, air gap (if any) and allowance for three threads protruding through the steel.
F10C144WDB Type 410 Stainless Steel #10 1 7/16 0.450 #2 Phillips Ribbed Wafer Head Machine Threads Full 24 0.967 Drill Point with Wings 3 4500
F10C144WDC Type 410 Stainless Steel #10 1 7/16 0.450 #2 Phillips Wafer Head Machine Threads Full 24 0.967 Drill Point with Wings 3 100
F10C144WDM Type 410 Stainless Steel #10 1 7/16 0.450 #2 Phillips Wafer Head Machine Threads Full 24 0.967 Drill Point with Wings 3 1000

Product Information Table

Model No. Length (in.) Screw Size Drive Type Head Diameter (in.) Head Type Thread Length Thread Type TPI Point Size Point Type Coating/Material Packaging Quantity UPC
F10C144WDB 1 7/16 #10 #2 Phillips 0.450 Wafer Head Full Machine Threads 24 3 Drill Point with Wings Type 410 Stainless Steel 4500 744039003419
F10C144WDC 1 7/16 #10 #2 Phillips 0.450 Wafer Head Full Machine Threads 24 3 Drill Point with Wings Type 410 Stainless Steel 100 744039632282
F10C144WDM 1 7/16 #10 #2 Phillips 0.450 Wafer Head Full Machine Threads 24 3 Drill Point with Wings Type 410 Stainless Steel 1000 744039632299

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT