RFB Retrofit Bolt
Misc. Adhesive Accessories
This product's information may differ depending on the category of use. You are currently viewing details related to Misc. Adhesive Accessories. You can also view product information related to the category: Bolts
RFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie adhesives. May be ordered in bulk without the nut and washer. Use with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry. Each end of the threaded rod is stamped with rod length in inches and our “No-Equal” symbol for easy identification after installation.
Material
- ASTM F1554 Grade 36; RFB#5X8SS — stainless steel
Finish
- Zinc plated, hot-dip galvanized; RFB#5X8SS — Type 316 stainless steel
Related Links
- Anchoring Systems Technical and Installation Notes
- Refer to Anchor Selector™ Software for ACI 318 for anchoring solutions
Catalog Pages
Related Literature
-
Sistemas de anclaje y sujeción para concreto y mampostería 2016-2017C-A-2016SPEl catálogo C-A-2016SP de 340 páginas proporciona información detallada de anclajes Simpson Strong-Tie para concreto y mampostería, incluidos nuevos productos de anclaje adhesivo y anclaje mecánico.Catalog -
Wood Construction Connectors CatalogC-C-2017Complete product and application information, as well as load tables and installation information, for more than 3,000 wood-to-wood, wood-to-concrete and wood-to-masonry connectors.Catalog -
Conectores para la construcción en madera 2017–2018C-C-2017SPInformación completa de productos, de la aplicación, de las tablas de cargas y de la instalación, para más de 3,000 conectores de madera a madera, madera a concreto y concreto a mampostería.Catalog -
2016 - 2017 Product Guide - Anchoring and Fastening SystemsS-A-PG16The 2016 Product Guide for Anchor & Fastening Systems provides information on adhesive and mechanical anchors, as well as direct fastening, carbide and restoration products.Product Guide -
High Wind-Resistant Construction Application GuideF-C-HWRCAG16The newly updated High Wind-Resistant Construction Application Guide offers new applications, updated loads, as well as more fastening information that is used to resist high-wind.Product Guide -
2016-2017 Guía de productos - Sistemas de anclaje y sujeciónS-A-PG16SPGuía de productos para sistemas de anclaje y sujeción S-A-PG16SP, con 236 páginas de información sobre anclajes mecánicos y adhesivos, y productos de sujeción directa, de carburo y de restauración.Flier -
Soft-Story Retrofit GuideF-L-SSRG18A design guide on soft-story retrofits, including soft-story design codes and requirements, retrofit solutions and design tools.Flier -
Flood-Resistant Construction Guide for Flood-Prone RegionsF-C-FLOODCON13This flier is designed to educate Specifiers, Building Officials, and Dealers about how to build code-compliant structures to resist the forces created by flooding and high wind.Flier -
Seismic Retrofit GuideF-SEISRETRGD12RA guide for homeowners to aid in the inspection and potential retrofit of their homes using Simpson Strong-Tie products to improve the chances of surviving a seismic event.Flier -
Safety Data Sheet for Mechanical AnchorsSDS-MechAnchors-NA-ENGIntended to provide information for use in workplace chemical management; information such as physical properties; hazards; protective measures; precautions for handling, storing, and transportation.SDS -
Ficha de Datos de Seguridad para Anclas MecánicasSDS-MechAnchors-NA-ESDiseñado para dar información útil en la gestión de químicos en el lugar de trabajo; p.ej. propiedades físicas; riesgos; medidas de protección; precauciones para manejo, almacenamiento y transporte.SDS -
Fiche de Données de Sécurité pour Ancrages MécaniquesSDS-MechAnchors-NA-FRCAPrévu pour fournir de l’information sur la gestion des produits chimiques au travail comme propriétés physiques, dangers, mesures de protection et précautions de manipulation, stockage et transport.SDS -
Show 10 MoreShow Less
Product Information Table
| Model No. | Coating/Material | Size (in.) | Carton Qty. |
|---|---|---|---|
|
Footnotes
|
|||
| RFB#4X10HDG | Hot-Dip Galvanized | 1/2 x 10 | 25 |
| RFB#4X4HDG | Hot-Dip Galvanized | 1/2 x 4 | 50 |
| RFB#4X5HDG | Hot-Dip Galvanized | 1/2 x 5 | 50 |
| RFB#4X5HDG-R | Hot-Dip Galvanized | 1/2 x 5 | 10 |
| RFB#4X6HDG | Hot-Dip Galvanized | 1/2 x 6 | 50 |
| RFB#4X7HDG | Hot-Dip Galvanized | 1/2 x 7 | 50 |
| RFB#4X8HDG-R | Hot-Dip Galvanized | 1/2 x 8 | 10 |
| RFB#5X10HDG | Hot-Dip Galvanized | 5/8 x 10 | 25 |
| RFB#5X12HDG-R | Hot-Dip Galvanized | 5/8 x 12 | 10 |
| RFB#5X16HDG | Hot-Dip Galvanized | 5/8 x 16 | 25 |
| RFB#5X16HDG-R | Hot-Dip Galvanized | 5/8 x 16 | 10 |
| RFB#5X5HDG | Hot-Dip Galvanized | 5/8 x 5 | 50 |
| RFB#5X5HDG-R | Hot-Dip Galvanized | 5/8 x 5 | 10 |
| RFB#5X8HDG | Hot-Dip Galvanized | 5/8 x 8 | 50 |
| RFB#5X8HDG-R | Hot-Dip Galvanized | 5/8 x 8 | 10 |
| RFB#6X10.5HDG | Hot-Dip Galvanized | 3/4 x 10 1/2 | 25 |
| RFB#5X8SS | Type 316 Stainless Steel | 5/8 x 8 | - |
| RFB#4X10 | Zinc Plated | 1/2 x 10 | 25 |
| RFB#4X10-R | Zinc Plated | 1/2 x 10 | 10 |
| RFB#4X4 | Zinc Plated | 1/2 x 4 | 50 |
| RFB#4X5 | Zinc Plated | 1/2 x 5 | 50 |
| RFB#4X6 | Zinc Plated | 1/2 x 6 | 50 |
| RFB#4X6-R | Zinc Plated | 1/2 x 6 | 10 |
| RFB#4X7 | Zinc Plated | 1/2 x 7 | 50 |
| RFB#4X7-R | Zinc Plated | 1/2 x 7 | 10 |
| RFB#5X10 | Zinc Plated | 5/8 x 10 | 25 |
| RFB#5X16 | Zinc Plated | 5/8 x 16 | 25 |
| RFB#5X5 | Zinc Plated | 5/8 x 5 | 50 |
| RFB#5X8 | Zinc Plated | 5/8 x 8 | 50 |
| RFB#6X10.5 | Zinc Plated | 3/4 x 10 1/2 | 25 |
Product Information Tables
| Description Dia. Length | Zinc-Plated Model No. | Hot-Dip Galvanized Model No. | Ctn Qty | Retail2 Pack |
|---|---|---|---|---|
| 1/2" x 4" | RFB#4x4 | RFB#4x4HDG | 50 | — |
| 1/2" x 5" | RFB#4x5 | RFB#4x5HDG | 50 | 10 |
| 1/2" x 6" | RFB#4x6 | RFB#4x6HDG | 50 | 10 |
| 1/2" x 7" | RFB#4x7 | RFB#4x7HDG | 50 | 10 |
| 1/2" x 8" | — | RFB#4x8HDG | — | 10 |
| 1/2" x 10" | RFB#4x10 | RFB#4x10HDG | 25 | 10 |
| 5/8" x 5" | RFB#5x5 | RFB#5x5HDG | 50 | 10 |
| 5/8" x 8" | RFB#5x8 | RFB#5x8HDG | 50 | 10 |
| 5/8" x 10" | RFB#5x10 | RFB#5x10HDG | 50 | 10 |
| 5/8" x 12" | — | RFB#5x12HDG | — | 10 |
| 5/8" x 16" | RFB#5x16 | RFB#5x16HDG | 25 | 10 |
| 3/4" x 10 1/2" | RFB#6x10.5 | RFB#6x10.5HDG | 25 | — |
|
||||
