text.skipToContent text.skipToNavigation

SBV/CF-R Shelf Brackets / Concrete Form Angles

SBV/CF-R

On This Page

Use the SBV for shelving, counter brackets and window ledge supports, at a very competitive price.

The CF-R is used where a moderate-size shelf bracket and reinforcing angle is needed. When used for tilt-up perimeter forming, the nail hole placement ensures substantial reuse.

Material

  • 16 gauge

Finish

  • Galvanized

Installation

  • Use all specified fasteners; see General Notes.
  • SBV — reversible for nominal 10" or 12" shelves of any thickness.
  • CF-R (Retail Pack) — recommended spacing is 36" for 2x's and 18" for 1x's. Use the 5" leg for 6" lumber and the 6" leg for 8" lumber. Holes are sized for 1/4" fasteners or 0.148"-diameter nails or #9 Strong-Drive® SD Connector screws.

Related Literature

Load Tables

  1. Fasteners: SDS screws are Simpson Strong-Tie® Strong-Drive® screws. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Code Reports

Part IAPMO UES ER ICC-ES ESR City of Los Angeles State of Florida
CF-RNo evaluation report listing.
SBVNo evaluation report listing.

Drawings

Part Orthographic Perspective
CF-R
CF-R Front View
DWG DXF
CF-R Right View
DWG DXF
CF-R Top View
DWG DXF
CF-R Installed Perspective View
DWG DXF
SBV
SBV Bottom View
DWG DXF
SBV Front View
DWG DXF
SBV Left View
DWG DXF
SBV Right View
DWG DXF
SBV Top View
DWG DXF
SBV Perspective View
DWG DXF