WUB Post Bracket
This product is only available in Canada
Product Details
The WUB is a U-shaped saddle bracket designed to connect wood posts to concrete. This post bracket is intended to be installed while the concrete is still wet. The WUB uses deformed rebar to secure it into concrete
Key Features
- HDG coating for higher corrosion resistance
- Specifically designed for cast-in-place applications
- Sizes available for both nominal and rough common post sizes
Material
- 3 gauge
Finish
- Hot-dip galvanized; use HDG fasteners
Installation
- Use all specified fasteners; see General Notes
- Install up to the bottom of the saddle while concrete is still wet
- Can be post-installed using Simpson Strong-Tie® AT-XP® anchoring adhesive
- Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non-top-supported installations
Related Literature
Product Information Table
| Model No. | Nominal Post Size | Ga. | W (in.) | L (in.) | Installs With | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|---|
|
Footnotes
|
|||||||
| WUB44HDG | 4x4 | 3 | 3 5/8 | 3 | (2) 1/2-in. HDG machine bolts into post | Hot-Dip Galvanized | 1 |
| WUB44RHDG | 4x4 rough | 3 | 4 1/8 | 3 | (2) 1/2-in. HDG machine bolts into post | Hot-Dip Galvanized | 1 |
| WUB66HDG | 6x6 | 3 | 5 5/8 | 3 | (2) 1/2-in. HDG machine bolts into post | Hot-Dip Galvanized | 1 |
| WUB66RHDG | 6x6 rough | 3 | 6 1/8 | 3 | (2) 1/2-in. HDG machine bolts into post | Hot-Dip Galvanized | 1 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
