F Panelized Construction Hanger
On This Page
Product Details
As the first hanger type created by Simpson Strong-Tie, the F hanger has proven its dependability over the decades. The F is designed specifically for the panelized roof industry that uses jigs or similar devices for precision fabrication. This hanger accommodates double 2x6, 4x4 and 4x6 joist sizes. Because of its expedited installation, the F is a cost-effective top-flange hanger.
Key Features
- Compression dimples, instead of joist nails, lock the joist in place, making installation faster
- Designed to allow panels to drop easily into place
- For panelized roof construction only
Material
- 18 gauge
Finish
- Galvanized. Some products available in ZMAX® coating. See Corrosion Information.
Installation
- Use all specified fasteners in pre-manufactured holes; see General Notes
- The diamond hole nail is non-structural and does not contribute to the load
- For additional information on retrofit options see flier RUZ/NRUZ Retrofit U Hangers for Panelized Roof Construction (F-C-RUZNRUZ)
Related Literature
Product Information Table
| Model No. | Joist Size | Ga. | W (in.) | H (in.) | TF (in.) | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|---|
| F26-2 | Double 2x6 | 18 | 3 1/4 | 5 3/8 | 1 3/16 | Zinc Galvanized, G90 | 1 |
| F44Z | 4x4 | 18 | 3 9/16 | 3 7/16 | 1 1/2 | ZMAX® | 1 |
| F46Z | 4x6 | 18 | 3 9/16 | 5 3/8 | 1 7/16 | ZMAX® | 1 |
Load Tables
These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.
- 0.148" x 3" nails can be used for specified 0.148" x 2 1/8" nails.
- Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
