We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

text.skipToContent text.skipToNavigation

PDPA Powder-Driven Pin

PDPA

On This Page

The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.300"-diameter head and a 0.157"-diameter shank. The PDPA provides maximum jobsite productivity with fast installation.

Key Features

  • The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
  • Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
  • Designed for use with Simpson Strong-Tie® powder-actuated tool systems as well as other common tools
  • The PDPA-MG models are mechanically galvanized for additional corrosion protection

Related Literature

2019–2021 Product Guide — Anchoring, Fastening Systems and Restoration Solutions for Concrete and Masonry
S-A-PG19
A product guide for Simpson Strong-Tie® providing information on adhesives, mechanical anchors, direct fastening, carbide drill bits, and concrete restoration products, for concrete and masonry.
Product Guide
Anchoring, Fastening, Restoration and Strengthening Systems for Concrete and Masonry
C-A-2021
An informative and comprehensive catalog of products belonging to our anchoring, fastening, restoration and strengthening systems for concrete and masonry.
Catalog
Sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería
C-A-2021SP
Un catálogo completo de productos e información para los sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería.
Catalog
2019–2021 Guía de productos - Anclaje, sistemas de sujeción y soluciones de restauración para concreto y mampostería
S-A-PG19SP
Guía de productos para Simpson Strong-Tie® con información sobre anclajes adhesivos, anclajes mecánicos, sujeción directa, brocas de carburo y productos para restauración para concreto y mampostería.
Product Guide
Substitution of PDPA/PDPAWL-287 PAF with Titen Turbo™ and Titen HD® Screw Anchors
L-A-PDPAWLSUB22
TNT and THD anchors may be used in lieu of PDPA/PDPAWL powder-actuated fasteners in a one-to-one replacement for anchoring 2x wood bottom plates or cold-formed steel bottom track to concrete.
Engineering Letter
Safety Data Sheet for Fasteners for Powder-Driven Tools
SDS-PATFasteners-NA-ENG-0520
Intended to provide information for use in workplace chemical management; information such as physical properties; hazards; protective measures; precautions for handling, storing, and transportation.
SDS
Ficha de Datos de Seguridad — Fijadores para Las Herramientas Accionada con Pólvora de Simpson Strong-Tie
SDS-PATFasteners-NA-ES
Diseñado para dar información útil en la gestión de químicos en el lugar de trabajo; p.ej. propiedades físicas; riesgos; medidas de protección; precauciones para manejo, almacenamiento y transporte.
SDS
Fiche de Données de Sécurité — Attaches pour Outils á Charge Explosive Simpson Strong-Tie
SDS-PATFasteners-NA-FRCA
Prévu pour fournir de l’information sur la gestion des produits chimiques au travail comme propriétés physiques, dangers, mesures de protection et précautions de manipulation, stockage et transport.
SDS
MasterFormat® Specification for Anchor Products
T-A-MSTRANCH21
Specification data for Simpson Strong-Tie Anchor products.
MasterFormat® Specification
MasterFormat® Specification for Anchor Products
T-A-MSTRANCH21
Specification data for Simpson Strong-Tie Anchor products.
MasterFormat® Specification
Simpson Strong-Tie® Suggested General Notes for Anchoring Systems (DOC)
SIMPSON-GENERAL-NOTES-AS_June2020
This comprehensive note is provided to the designer in order to specify the "design basis" post ­installed anchor products to be used on the project.
MasterFormat® Specification
Simpson Strong-Tie® Suggested General Notes for Anchoring Systems (PDF)
SIMPSON-GENERAL-NOTES-AS_June2020
This comprehensive note is provided to the designer in order to specify the "design basis" post ­installed anchor products to be used on the project.
MasterFormat® Specification

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Length (in.) Head Diameter (in.) Shank Diameter (in.) Coating Compatible Tools Pack Qty. Carton Qty.
PDPA-100 1 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-106 1 1/16 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-125 1 1/4 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-131 1 5/16 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-150 1 1/2 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-187 1 7/8 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-200 2 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-200MG 2 0.300 0.157 Mechanically Galvanized, Class 65 PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-250 2 1/2 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-250MG 2 1/2 0.300 0.157 Mechanically Galvanized, Class 65 PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-287 2 7/8 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-287MG 2 7/8 0.300 0.157 Mechanically Galvanized, Class 65 PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-50 1/2 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-50K 1/2 knurled 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-62K 5/8 knurled 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000
PDPA-75 3/4 0.300 0.157 Mechanically Galvanized PTP-27L, PT-27, PT-22A, PT-22HA 100 1000

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products