PDPAS Powder-Driven Collated Pin

PDPAS

On This Page

Product Details

The PDPAS is a 10-pin collation of hardened-steel PDPA pins designed to fasten building components to concrete, steel and CMU. The PDPAS consists of a strip of hardened-steel pins that have 0.300"-diameter heads and 0.157"-diameter shanks. The PDPAS eliminates the need for reloading and provides maximum jobsite productivity with fast installation.

Key Features

The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
Designed for use with many low-velocity magazine tools

Design Information and Load Tables

PDPAS Design Information

Related Links

Catalog Pages

C-A-2021 (Anchoring, Fastening and Restoration Systems), pages 184–187

Related Literature

2022–2025 Product Guide — Anchoring, Fastening Systems and Restoration Solutions for Concrete and Masonry

A product guide providing information on Simpson Strong-Tie® anchoring adhesives, mechanical anchors, direct fastening, carbide drill bits and restoration products for concrete and masonry.

Anchoring, Fastening, Restoration and Strengthening Systems for Concrete and Masonry

An informative and comprehensive catalog of products belonging to our anchoring, fastening, restoration and strengthening systems for concrete and masonry.

Sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería

Un catálogo completo de productos e información para los sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería.

Safety Data Sheet for Fasteners for Powder-Driven Tools

SDS-PATFasteners-NA-ENG-0520

Intended to provide information for use in workplace chemical management; information such as physical properties; hazards; protective measures; precautions for handling, storing, and transportation.

MasterFormat® Specification for Anchor Products

Specification data for Simpson Strong-Tie Anchor products.

MasterFormat® Specification

MasterFormat® Specification for Anchor Products

Specification data for Simpson Strong-Tie Anchor products.

MasterFormat® Specification

Simpson Strong-Tie® Suggested General Notes for Anchoring Systems (DOC)

SIMPSON-GENERAL-NOTES-AS_June2020

This comprehensive note is provided to the designer in order to specify the "design basis" post installed anchor products to be used on the project.

MasterFormat® Specification

Simpson Strong-Tie® Suggested General Notes for Anchoring Systems (PDF)

SIMPSON-GENERAL-NOTES-AS_June2020

This comprehensive note is provided to the designer in order to specify the "design basis" post installed anchor products to be used on the project.

MasterFormat® Specification

Product Information Table

Fastener Production Information and Stuff & Things
Model No.	Length (in.)	Head Diameter (in.)	Shank Diameter (in.)	Pack Qty.	Carton Qty.
PDPAS-100	1	0.300	0.157	100	1000
PDPAS-125	1 1/4	0.300	0.157	100	1000
PDPAS-150	1 1/2	0.300	0.157	100	1000
PDPAS-187	1 7/8	0.300	0.157	100	1000
PDPAS-200	2	0.300	0.157	100	1000
PDPAS-250	2 1/2	0.300	0.157	100	1000
PDPAS-287	2 7/8	0.300	0.157	100	1000
PDPAS-50	1/2	0.300	0.157	100	1000
PDPAS-50K	1/2 knurled	0.300	0.157	100	1000
PDPAS-62K	5/8 knurled	0.300	0.157	100	1000
PDPAS-75	3/4	0.300	0.157	100	1000

Code Reports & Compliance

Drawings

		PDF	DWG	DXF	RFA	IFC	SAT