PINWP Powder-Actuated Plastic-Washered Pin for Insulation Board

PINWP

On This Page

Product Details

The PINWP is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINWP consists of a 0.300″-headed fastener with a pre-mounted 1 3/8″ flat plastic washer. The PINWP is for high-volume applications and is designed for fastening into concrete and steel.

Key Features

The minimum effective shank length must equal or exceed the combined thickness of the attached material and the minimum embedment depth
Code listed per ICC-ES ESR-2138 and Florida FL15730
Designed for use with Simpson Strong-Tie® powder-actuated tools and compatible with many competitive tools

Design Information and Load Tables

Design Information for Gas- and Powder-Actuated Fasteners

Related Links

Catalog Pages

C-A-2021 (Anchoring, Fastening and Restoration Systems), pages 184–187 and pages 189–197

Related Literature

2022–2025 Product Guide — Anchoring, Fastening Systems and Restoration Solutions for Concrete and Masonry

A product guide providing information on Simpson Strong-Tie® anchoring adhesives, mechanical anchors, direct fastening, carbide drill bits and restoration products for concrete and masonry.

Anchoring, Fastening, Restoration and Strengthening Systems for Concrete and Masonry

An informative and comprehensive catalog of products belonging to our anchoring, fastening, restoration and strengthening systems for concrete and masonry.

Sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería

Un catálogo completo de productos e información para los sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería.

Safety Data Sheet for Fasteners for Powder-Driven Tools

SDS-PATFasteners-NA-ENG-0520

Intended to provide information for use in workplace chemical management; information such as physical properties; hazards; protective measures; precautions for handling, storing, and transportation.

Ficha de Datos de Seguridad — Fijadores para Las Herramientas Accionada con Pólvora de Simpson Strong-Tie

SDS-PATFasteners-NA-ES

Diseñado para dar información útil en la gestión de químicos en el lugar de trabajo; p.ej. propiedades físicas; riesgos; medidas de protección; precauciones para manejo, almacenamiento y transporte.

Fiche de Données de Sécurité — Attaches pour Outils á Charge Explosive Simpson Strong-Tie

SDS-PATFasteners-NA-FRCA

Prévu pour fournir de l’information sur la gestion des produits chimiques au travail comme propriétés physiques, dangers, mesures de protection et précautions de manipulation, stockage et transport.

MasterFormat® Specification for Anchor Products

Specification data for Simpson Strong-Tie Anchor products.

MasterFormat® Specification

MasterFormat® Specification for Anchor Products

Specification data for Simpson Strong-Tie Anchor products.

MasterFormat® Specification

Simpson Strong-Tie® Suggested General Notes for Anchoring Systems (DOC)

SIMPSON-GENERAL-NOTES-AS_June2020

This comprehensive note is provided to the designer in order to specify the "design basis" post installed anchor products to be used on the project.

MasterFormat® Specification

Simpson Strong-Tie® Suggested General Notes for Anchoring Systems (PDF)

SIMPSON-GENERAL-NOTES-AS_June2020

This comprehensive note is provided to the designer in order to specify the "design basis" post installed anchor products to be used on the project.

MasterFormat® Specification

Product Information Table

Fastener Production Information and Stuff & Things
Model No.	Length (in.)	Head Diameter (in.)	Shank Diameter (in.)	Compatible Tools	Pack Qty.	Carton Qty.
Footnotes Models PINWP-150MF and PINWP-250MF feature inverted plastic washers.
PINWP-150MF	1 1/2	0.300	0.145	PTP-27L, PT-27, PT-22A, PT-22HA	-	500
PINWP-150W	1 1/2	0.300	0.145	PTP-27L, PT-27, PT-22A, PT-22HA	50	500
PINWP-175W	1 3/4	0.300	0.145	PTP-27L, PT-27, PT-22A, PT-22HA	50	500
PINWP-200W	2	0.300	0.145	PTP-27L, PT-27, PT-22A, PT-22HA	50	500
PINWP-250MF	2 1/2	0.300	0.145	PTP-27L, PT-27, PT-22A, PT-22HA	-	500
PINWP-250W	2 1/2	0.300	0.145	PTP-27L, PT-27, PT-22A, PT-22HA	50	500
PINWP-300W	3	0.300	0.145	PTP-27L, PT-27, PT-22A, PT-22HA	50	500

Code Reports & Compliance

Drawings

		PDF	DWG	DXF	RFA	IFC	SAT