We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

PSLV3 Threaded Studs

PSLV3

On This Page

The PSLV3 powder-actuated fastener features a 1 1/4" threaded 3/8"—16 stud with a 0.205"-diameter shank. It is available in smooth and knurled versions for attaching building materials to concrete and steel. All PSLV3 fastener sizes are code-listed per ICC-ES ESR-2138. 

Key Features

  • Ideal for anchoring component and fixtures to concrete
  • Code-listed per ICC-ES ESR-2138 and Florida FL15730
  • Compatible with most major PAT tools

Related Literature

2022–2025 Product Guide — Anchoring, Fastening Systems and Restoration Solutions for Concrete and Masonry
S-A-PG22
A product guide providing information on Simpson Strong-Tie® anchoring adhesives, mechanical anchors, direct fastening, carbide drill bits and restoration products for concrete and masonry.
Product Guide
Anchoring, Fastening, Restoration and Strengthening Systems for Concrete and Masonry
C-A-2021
An informative and comprehensive catalog of products belonging to our anchoring, fastening, restoration and strengthening systems for concrete and masonry.
Catalog
Sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería
C-A-2021SP
Un catálogo completo de productos e información para los sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería.
Catalog
Safety Data Sheet for Fasteners for Powder-Driven Tools
SDS-PATFasteners-NA-ENG-0520
Intended to provide information for use in workplace chemical management; information such as physical properties; hazards; protective measures; precautions for handling, storing, and transportation.
SDS
Ficha de Datos de Seguridad — Fijadores para Las Herramientas Accionada con Pólvora de Simpson Strong-Tie
SDS-PATFasteners-NA-ES
Diseñado para dar información útil en la gestión de químicos en el lugar de trabajo; p.ej. propiedades físicas; riesgos; medidas de protección; precauciones para manejo, almacenamiento y transporte.
SDS
Fiche de Données de Sécurité — Attaches pour Outils á Charge Explosive Simpson Strong-Tie
SDS-PATFasteners-NA-FRCA
Prévu pour fournir de l’information sur la gestion des produits chimiques au travail comme propriétés physiques, dangers, mesures de protection et précautions de manipulation, stockage et transport.
SDS
MasterFormat® Specification for Anchor Products
T-A-MSTRANCH21
Specification data for Simpson Strong-Tie Anchor products.
MasterFormat® Specification
MasterFormat® Specification for Anchor Products
T-A-MSTRANCH21
Specification data for Simpson Strong-Tie Anchor products.
MasterFormat® Specification
Simpson Strong-Tie® Suggested General Notes for Anchoring Systems (DOC)
SIMPSON-GENERAL-NOTES-AS_June2020
This comprehensive note is provided to the designer in order to specify the "design basis" post ­installed anchor products to be used on the project.
MasterFormat® Specification
Simpson Strong-Tie® Suggested General Notes for Anchoring Systems (PDF)
SIMPSON-GENERAL-NOTES-AS_June2020
This comprehensive note is provided to the designer in order to specify the "design basis" post ­installed anchor products to be used on the project.
MasterFormat® Specification

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Length (in.) Shank Diameter (in.) Pack Qty. Carton Qty.
PSLV3-125100 3/8"-16 x 1 1/4" threaded stud length (1" smooth shank) 0.205 100 1000
PSLV3-125125 3/8"-16 x 1 1/4" threaded stud length (1 1/4" smooth shank) 0.205 100 1000
PSLV3-12575K 3/8"-16 x 1 1/4" threaded stud length (3/4" knurled shank) 0.205 100 1000

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT