PFB Post-Frame Top-Flange Hanger, Bent
Product Details
The PFB top-flange hanger is for use in post-frame construction. It has dome-shaped joist nail holes that guide nails into the proper installation angle. The PFB features a folded seat that raises the 2x joist slightly above the seat radius to enable a tighter connection to the back of the hanger.
Key Features
- Solid one-piece top flange allows for accurate and fast installation
- Installation prongs make setting the hanger quick and easy
- The double-shear nailing design distributes the load throughout two points on each joist, providing greater strength with fewer nails
Material
- 20 gauge
Finish
- Galvanized
Installation
- Use all specified fasteners; see General Notes.
- 0.148" x 3" purlin nails must be driven at an angle through the purlin into the header. Combine with top nails to achieve table loads.
- 0.148" x 1 1/2" purlin nails must be driven at an angle into the purlin but do not penetrate into the header. Combine with back face fasteners and top nails to achieve table loads.
Related Literature
Product Information Table
Model No. | Joist Size | Ga. | W (in.) | H (in.) | B (in.) | TF (in.) | Coating/Material | Packaging Qty. |
---|---|---|---|---|---|---|---|---|
PF24B | 2x4 | 20 | 1 9/16 | 3 3/8 | 1 1/4 | 1 1/2 | Zinc Galvanized, G90 | 1 |
PF26B | 2x6 | 20 | 1 9/16 | 5 3/8 | 1 1/4 | 1 1/2 | Zinc Galvanized, G90 | 1 |
PF28B | 2x8 | 20 | 1 9/16 | 7 1/8 | 1 1/4 | 1 1/2 | Zinc Galvanized, G90 | 1 |
Load Tables
![PFB Load Table](https://www2.strongtie.com/graphics/products/tables/134a-2019_updated-pfb-2020-12-11.png)
- Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern.
- Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.
Code Reports & Compliance
Drawings
DWG | DXF | RFA | IFC | SAT | |||
---|---|---|---|---|---|---|---|