text.skipToContent text.skipToNavigation

Face-Mount Hangers – Load Tables for Rough Lumber (Douglas Fir and Southern Pine)

   These models are approved for installation with the Strong-Drive® SD Connector screw. See the load values below.

  1. Uplift loads apply to 10d and 16d header fasteners. Uplift loads have been increased for wind or earthquake loading with no further increase allowed. Reduce where other loads govern.
  2. 10d commons or 16d sinkers may be used instead of the specified 16d at 0.84 of the table load value.
  3. 16d sinkers may be used instead of the specified 10d commons with no load reduction.
  4. DF/SP loads can be used for SCL that has fastener holding capacity of Doug Fir.
  5. HUs can be ordered in rough sizes at full table loads. Add "X" to the model designation ex: HU28X and specify rough width or height. Maximum width 8".
  6. Nails: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10d x 1 1/2" = 0.148" dia. x 1 1/2" long. See other nail sizes and information.