We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

text.skipToContent text.skipToNavigation

Hanger Options Matrix

Technical & Installation Notes

Face-Mount Hanger Option Matrix

See Hanger Options General Notes

KEY:
all models
= Available for all models    some models = Available for some models
Std. = Available with standard model (no modification required)

HANGER MODIFICATION OPTIONS APPLICATIONS
BASE MODEL SERIES Skewed Seat Sloped Seat
180-2008_slopeable
Skewed & Sloped Seat
180-2008_slopeable-skewable
Concealed Flange
180-2008_concealed
Alternate Widths Alternate Heights Uplift
Weldability
Application Uplift Application Weldable
Allowable Skew
180-2008_skewable
Square Cut Joist Allowed
180-2008_buttcut
FACE-MOUNT HANGERS
  • Refer to the specific product pages for uplift, nailer, and weld information.
  • Refer to the listed pages for each model series for restrictions, required load reductions, and additional information regarding the hanger modifications.
  • HUC less than 3 1⁄4" wide cannot be skewed 45°. See pages 101 and 143 in the Wood Construction Connectors Catalog for allowable skews for narrower widths.
  • Square cut allowed for beams up to 5 1⁄2" and four-ply trusses.
  • For sloped and skewed combinations on top-flange hangers, specify whether the beam will be high side, low side, or center flush with carrying member.
  • DHU ≤45° all models some models U
    HGU ≤45° See Note 4 some models all models all models U
    HGUM ≤45° See Note 4 all models all models all models U
    HGUS ≤45° some models U
    HHGU all models all models all models U
    HHUS ≤45° ≤45° all models U
    HSUL/HSUR 45° Std. all models some
    models
    U
    HSULC/HSURC 45° Std. all models Std. U
    HTU ≤67½° all models U
    HU ≤67½°
    some models
    all models ≤45° all models some models some models some models U, W
    HUC See Note 3 all models ≤45° Std. some models some models U, W
    HUCQ Std. U
    HUS U
    IUS U
    LGU ≤45° all models some models all models all models U
    LGUM ≤45° See Note 4 U
    LSSJ/LSSR Field skewable and slopeable to 45° U
    LTHJA U
    LTHMA U
    LU U
    LUC Std. U
    LUS U
    MGU ≤45° See Note 4 some models all models all models U
    MIU U
    MUS U
    SUL/SUR 45° Std. all models U
    SULC/SURC 45° Std. all models Std. U
    THGB/THGBH ≤45° See Note 4 all models U
    THGBV/THGBHV ≤45° See Note 4 U
    THGQH 45° all models U
    THJA U
    THJU some models U
    U 67½° all models ≤45° all models some models some models U

    Top-Flange Hanger Option Matrix

    KEY:
    all models
    = Available for all models   some models = Available for some models
    Std. = Available with standard model (no modification required)

    HANGER MODIFICATION OPTIONS APPLICATIONS
    BASE MODEL SERIES Skewed Seat Sloped
    Seat

    Slopeable
    Skewed & Sloped Seat
    Slopeable and Skewable
    Concealed
    Flange(s)

    Concealed Flanges
    Alternate Widths Alternate Heights Sloped Top Flange
    Sloped Top Flange
    Open Top Flange
    Open Top Flange
    Closed Top Flange
    Closed Top Flange
    Offset Top Flange
    Offset Top Flange
    Saddle Hanger
    Saddle Hanger
    Ridge Hanger
    Ridge Hanger
    Uplift
    Nailers
    Weldability

    Application Uplift Application Nailer Application Weldable
    Allowable Skew
    Skewable
    Square
    Cut Joist Allowed

    Butt Cut
    TOP-FLANGE HANGERS
  • Refer to the specific product pages for uplift, nailer, and weld information.
  • Refer to the listed pages for each model series for restrictions, required load reductions, and additional information regarding the hanger modifications.
  • HUC less than 3 1⁄4" wide cannot be skewed 45°. See pages 101 and 143 in the Wood Construction Connectors Catalog for allowable skews for narrower widths.
  • Square cut allowed for beams up to 5 1⁄2" and four-ply trusses.
  • For sloped and skewed combinations on top-flange hangers, specify whether the beam will be high side, low side, or center flush with carrying member.
  • BA all models all models all models all models all models all models all models all models U, N, W
    DGF/DGBF some models some models U, N, W
    DHUTF ≤45° all models some models all models all models U
    EG ≤45° ≤45° all models all models
    EGQ ≤45° ≤45° some models all models U
    GH ≤45° all models all models
    GLS ≤50° ≤45° all models some models all models all models all models all models U, W
    HB ≤45° ≤45° all models all models all models all models all models all models all models U, N, W
    HGLS ≤50° ≤45° some models all models all models all models all models U, W
    HGLT ≤50° ≤45° all models all models all models all models U, W
    HGLTV ≤50° ≤45° some models all models all models all models U, W
    HIT U, N
    HUCTF/HUCITF ≤45° Std. all models some models U
    HUSTF U
    HUTF/HUITF ≤45°
    some models
    all models ≤45°
    some models
    some models some models some models some models U
    HWP/HWPH ≤45° ≤45° some models some models all models all models all models all models U, N, W
    ITS U, N
    JBA/JBA U, N
    LB/LBAZ U, N, W
    LEG ≤45° all models ≤45° some models all models all models
    MBHA ≤45° all models
    MEG ≤45° all models ≤45° some models all models all models
    MIT U, N
    MSC 20°–45°
    some models
    all models ≤45° all models some models all models
    PF U
    THA some models U, N
    THAC Std. U, N
    THAI N
    THAR/L 45° Std. all models U, N
    THASR/L 22°–75°
    Field Skewable
    all models U
    WMU ≤84° ≤45° some models all models
    WP ≤84° some models ≤45° all models some models all models all models all models all models all models all models some models N, W

    KEY:
    all models
    = Available for all models    some models = Available for some models
    Std. = Available with standard model (no modification required)