text.skipToContent text.skipToNavigation

Top-Flange Hangers: Load Tables for Solid Sawn Lumber (Douglas Fir and Southern Pine)

Technical & Installation Notes

  These products are available with additional corrosion protection.

Codes: See Code Reference Key Chart.

Top-Flange Hangers — Solid Sawn Lumber (DF/SP) Load Table

See footnotes.

Top-Flange Hangers — Solid Sawn Lumber (DF/SP) Load Table

See footnotes.

Top-Flange Hangers — Solid Sawn Lumber (DF/SP) Load Table
  1. Uplift loads have been increased for wind or earthquake loading with no further increase allowed. For normal loading applications such as cantilever construction, refer to Simpson Strong-Tie® Connector Selector® software or conservatively divide the uplift load by 1.6.
  2. N54A fasteners are supplied with hangers.
  3. Uplift loads are based on DF/SP lumber. For SPF/HF, use 0.86 x DF/SP uplift load.
  4. HGLT information can be found on pp. 168–169.
  5. Hangers with an "*" do not have an Installed Cost Index.
  6. Fasteners: Nail dimensions in the table are listed diameter by length. See other nail sizes and information.