×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

Titen HD® Washer-Head Style Heavy-Duty Screw Anchor

The Titen HD with washer head is a high-strength screw anchor for use in cracked and uncracked concrete, as well as masonry. The washer-head design is commonly used where a minimal head profile is necessary. The model is offered in sizes suitable for use in sill plate applications, and the washer head's low installed profile means modular wall and floor systems can be installed on top with no need for notching the wall framing to accommodate the anchor. The anchor's 6-lobe drive eases driving and is less prone to stripping.

Key Features

  • Tested in accordance with ACI 355.2 and AC193
  • Qualified for static, wind and seismic loading conditions
  • Available in 1/2" and 5/8" diameters
  • Standard fractional sizes — the hole size matches the anchor size
  • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
  • For added convenience, a 1/2" socket adapter and (2) T-drive bits are included in each box
  • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
  • Washer head allows screw anchor applications incompatible with a hex head

Material

  • Carbon steel

Finish

  • Zinc plated

Installation

  1. Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified embedment depth plus minimum hole depth overdrill (see table below) to allow the thread tapping dust to settle, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling and tapping.
  2. Insert the anchor through the fixture and into the hole.
  3. Tighten the anchor into the base material until the washer head contacts the fixture.
Titen HD Diameter (in.) Drive Type Recommended Fixture Hole Size (in.) Min. Hole Depth Overdrill (in.)
1/2 T50 3/4 to 11/16 1/2
5/8 T60 15/16 to 13/16 1/2

Caution

  • Holes in metal fixtures to be mounted should match the diameter specified in the table above.
  • Use a Titen HD screw anchor one time only — installing the anchor multiple times may result in excessive thread wear and reduce load capacity.
  • Do not use impact wrenches to install into hollow CMU.
  • Oversized holes in base material will reduce or eliminate the mechanical interlock of the threads with the base material and reduce the anchor’s load capacity.
  • Installation of concrete screw generally is influenced by many factors such as but not limited to, concrete compressive strength, type of aggregate, installation location, installation direction and tools used for installation.

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Coating/Material Size (in.) Drill Bit Dia. (in.) Recommended Fixture Hole Size (in.) Product Includes Packaging Qty. Carton Qty.
Footnotes
  1. Length of anchor is measured from top of head to bottom of anchor.

  2. Cartons contain the listed quantity of 10-count or 15-count boxes.
THD50600WH Zinc Plated / Carbon Steel 1/2 x 6 1/2 3/4 to 13/16 1/2-in. socket adapter and (2) T-drive bits 15 4
THD50800WH Zinc Plated / Carbon Steel 1/2 x 8 1/2 3/4 to 13/16 1/2-in. socket adapter and (2) T-drive bits 15 2
THDB62100WH Zinc Plated / Carbon Steel 5/8 x 10 5/8 15/16 to 1 1/2-in. socket adapter and (2) T-drive bits 10 2
THDB62600WH Zinc Plated / Carbon Steel 5/8 x 6 5/8 15/16 to 1 1/2-in. socket adapter and (2) T-drive bits 10 4
THDB62800WH Zinc Plated / Carbon Steel 5/8 x 8 5/8 15/16 to 1 1/2-in. socket adapter and (2) T-drive bits 10 2

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT