text.skipToContent text.skipToNavigation

Drill It. Drive It. Forget It.

The Next Era of Stainless-Steel Screw Anchor For Concrete and Masonry

Titen HD® screw anchors are a trusted anchor solution because they offer the performance that specifiers need and the ease of installation that contractors demand. Until now, however, they were not for use in exterior or corrosive environments because they are heat-treated carbon steel. The stainless-steel Titen HD screw anchor (THDSS) for concrete and masonry sets the new standard for when the job calls for installation in any type of environment. The THDSS is the ultimate choice to provide fast and efficient installation, combined with long-lasting corrosion resistance that gives you an unsurpassed peace-of-mind on the jobsite.

Stainless-Steel Titen HD

Other stainless-steel bi-metal anchors are made by welding a full carbon segment onto the end of the anchor to facilitate cutting. Once installed, the carbon-steel segment embedded in the concrete is vulnerable to rust. As carbon steel rusts, it can expand up to ten times its original volume, cracking and damaging concrete if installed near an edge. The carbon-steel content of the stainless-steel Titen HD has been minimized to cut grooves in the concrete during installation, its mass is too small to cause concrete damage if it were to corrode.

Innovative

The serrated threads on the tip of the stainless-steel Titen HD are vital because they undercut the concrete as the anchor is driven into the hole, making way for the rest of the threads to interlock with the concrete. In order for these threads to be durable enough to cut into the concrete, they are formed from carbon steel that is hardened.

Corrosion Resistant

For dry, interior applications, corrosion associated with carbon-steel is not a risk, but in many kinds of exterior, coastal or chemical environments, the anchor would be vulnerable to corrosion. With the introduction of the stainless-steel Titen HD, there is finally a state-of-the-art screw anchor solution that combines the corrosion resistance of Type 316 stainless steel with the undercutting ability of a heat-treated carbon-steel cutting threads.

View More Product Information

Innovative Corrosion Resistant Stainless-Steel Titen HD

Stainless-Steel Titen HD Applications

For Using in Seating, Catwalks, Machinery, Piping, Railings, and more

installation
Use in exterior environments
railings
Outdoor fixtures
ledger
Deck ledgers
stadium
Stadiums
  • Wastewater treatment
  • Stadium seating
  • Curtain walls
  • Clean rooms
  • Central utility plant facility
  • Food processing facility
  • Fertilizer storage buildings
  • Light rail (transportation)
  • Ledger bolts for decks
  • DOT signs and fixtures
  • Agricultural facilities
  • Cooling tower
  • Pulp and paper mills
  • Sill plates in coastal environments
  • Scaffolding
  • Marine/port restoration
  • Parking structures
  • Tunnels
  • Cooling towers
  • Concrete over metal decking
  • Balconies
  • Refineries
  • Breweries and wineries
  • Fencing
  • Outdoor railings
Titen HD Anchor Product
Innovative carbon-steel thread effectively cuts the concrete while significantly limiting the amount of carbon-steel in the anchor.

Get more information about Stainless-Steel Titen HD