HSLQ Heavy Shear Transfer Angle
The HSLQ heavy shear transfer angle is designed to transfer lateral loads from wood solid-sawn joists or blocking into a wood solid-sawn element such as a moment frame nailer. The angle offers versatility by allowing up to a two-inch gap between the structural members and easy installation with Simpson Strong-Tie Strong-Drive® SDS Heavy-Duty Connector screws that are included with the HSLQ. The HSLQ is manufactured with a gap indication notch to make proper installation easy.
Material: 12 gauge
Finish: Galvanized, available in HDG
Installation:
- Use all specified fasteners; see General Notes.
- Use long leg with notch indicator. (Notch indicates maximum allowed gap.)
- Minimum 4x8 wood members are required.
- Add filler shims where required in order not to load the angle in any direction other than lateral, as indicated.

HSLQ37
(HSLQ312, HSLQ47, HSLQ412 similar)
(HSLQ312, HSLQ47, HSLQ412 similar)

Typical HSLQ37 Installation

Typical HSLQ412 Installation


- Tables loads are for one angle.
- Loads are applicable to installation on either the narrow or the wide face of member.
- Minimum 4x8 wood members are required.
- SPF/HF values are based on DF/SP with reduction factor of 0.86.
- HSLQ is used for in-plane lateral load transfer only. Designer to provide for frame out-of-plane stability as required.